ROMFS: standard VTOL: enable CA by default and remove legacy mixer

Signed-off-by: Silvan Fuhrer <silvan@auterion.com>

ROMFS/px4fmu_common/init.d/airframes/13000_generic_vtol_standard

@@ -1,22 +1,10 @@
 #!/bin/sh
 #
-# @name Generic Quadplane VTOL
+# @name Generic Standard VTOL
 #
 # @type Standard VTOL
 # @class VTOL
-#
+
-# @maintainer
-#
-# @output MAIN1 motor 1
-# @output MAIN2 motor 2
-# @output MAIN3 motor 3
-# @output MAIN4 motor 4
-# @output AUX1 Aileron 1
-# @output AUX2 Aileron 2
-# @output AUX3 Elevator
-# @output AUX4 Rudder
-# @output AUX5 Throttle
-#
 # @board px4_fmu-v2 exclude
 # @board bitcraze_crazyflie exclude
 # @board holybro_kakutef7 exclude
@@ -24,21 +12,21 @@
 
 . ${R}etc/init.d/rc.vtol_defaults
 
+param set-default SYS_CTRL_ALLOC 1
 param set-default CA_AIRFRAME 2
 param set-default CA_ROTOR_COUNT 5
-param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -0.15
+param set-default CA_ROTOR2_PY -1
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 0.15
+param set-default CA_ROTOR3_PY 1
 param set-default CA_ROTOR3_KM -0.05
 param set-default CA_ROTOR4_AX 1.0
 param set-default CA_ROTOR4_AZ 0.0
-param set-default CA_ROTOR4_PX 0.2
 param set-default CA_SV_CS_COUNT 4
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS0_TRQ_R -0.5
@@ -48,16 +36,5 @@ param set-default CA_SV_CS2_TYPE 3
 param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS3_TRQ_Y 1.0
 param set-default CA_SV_CS3_TYPE 4
-
-param set-default PWM_AUX_DIS5 950
-
 param set-default VT_TYPE 2
-param set-default VT_MOT_ID 1234
-param set-default VT_FW_MOT_OFFID 1234
-
 param set-default MAV_TYPE 22
-
-set MIXER quad_x
-set MIXER_AUX vtol_AAERT
-
-set PWM_OUT 1234