Move duplicate LCD orieations settings from configs/*/Kconfig to drivers/lcd/Kconfig

git-svn-id: https://nuttx.svn.sourceforge.net/svnroot/nuttx/trunk@5036 7fd9a85b-ad96-42d3-883c-3090e2eb8679

nuttx/configs/stm3210e-eval/Kconfig

@@ -28,34 +28,7 @@ config ARCH_IRQBUTTONS
 config STM3210E_LCD
 	bool "Select support for the STM3210E-EVAL LCD"
 	default y
-	depends on STM32_FSMC
+	depends on LCD && STM32_FSMC
-
-choice
-	prompt "STM3210E-EVAL LCD Orientation"
-	default LCD_LANDSCAPE
-	depends on STM3210E_LCD
-
-config LCD_LANDSCAPE
-	bool "320x240 landscape display"
-	---help---
-		Define for 320x240 display "landscape" support. Default is this 320x240
-		"landscape" orientation (this setting is informative only... not used).
-
-config LCD_PORTRAIT
-	bool "240x320 portrait display"
-	---help---
-		Define for 240x320 display "portrait" orientation support.  In this
-		orientation, the STM3210E-EVAL's LCD ribbon cable is at the bottom of
-		the display. Default is 320x240 "landscape" orientation.
-
-config LCD_RPORTRAIT
-	bool "240x320 reverse portrait display"
-	---help---
-		Define for 240x320 display "reverse portrait" orientation support.  In
-		this orientation, the STM3210E-EVAL's LCD ribbon cable is at the top
-		of the display. Default is 320x240 "landscape" orientation.
-
-endchoice
 
 config LCD_BACKLIGHT
 	bool "LCD backlight support"

nuttx/configs/stm3220g-eval/Kconfig

@@ -26,54 +26,7 @@ config ARCH_IRQBUTTONS
 config STM3220G_LCD
 	bool "Select support for the STM3210E-EVAL LCD"
 	default y
-	depends on STM32_FSMC
+	depends on LCD && STM32_FSMC
-
-choice
-	prompt "STM3220G-EVAL LCD Orientation"
-	default LCD_LANDSCAPE
-	depends on STM3220G_LCD
-
-config LCD_LANDSCAPE
-	bool "320x240 landscape display"
-	---help---
-		Define for 320x240 display "landscape" support. Default is this 320x240
-		"landscape" orientation.
-
-		For the STM3220G-EVAL board, the edge opposite from the row of buttons
-		is used as the top of the display in this orientation.
-
-config LCD_RLANDSCAPE
-	bool "320x240 reverse landscape display"
-	---help---
-		Define for 320x240 display "reverse landscape" support. Default is this 320x240
-		"landscape" orientation.
-
-		For the STM3220G-EVAL board, the edge next to the row of buttons
-		is used as the top of the display in this orientation.
-
-config LCD_PORTRAIT
-	bool "240x320 portrait display"
-	---help---
-		Define for 240x320 display "portrait" orientation support.  In this
-		orientation, the STM3210E-EVAL's LCD ribbon cable is at the bottom of
-		the display. Default is 320x240 "landscape" orientation.
-
-		In this orientation, the top of the display is to the left
-		of the buttons (if the board is held so that the buttons are at the
-		botton of the board).
-
-config LCD_RPORTRAIT
-	bool "240x320 reverse portrait display"
-	---help---
-		Define for 240x320 display "reverse portrait" orientation support.  In
-		this orientation, the STM3210E-EVAL's LCD ribbon cable is at the top
-		of the display. Default is 320x240 "landscape" orientation.
-
-		In this orientation, the top of the display is to the right
-		of the buttons (if the board is held so that the buttons are at the
-		botton of the board).
-
-endchoice
 
 config LCD_RDSHIFT
 	int "LCD data shift"

nuttx/configs/stm3240g-eval/Kconfig

@@ -26,54 +26,7 @@ config ARCH_IRQBUTTONS
 config STM3240G_LCD
 	bool "Select support for the STM3210E-EVAL LCD"
 	default y
-	depends on STM32_FSMC
+	depends on LCD && STM32_FSMC
-
-choice
-	prompt "STM3240G-EVAL LCD Orientation"
-	default LCD_LANDSCAPE
-	depends on STM3240G_LCD
-
-config LCD_LANDSCAPE
-	bool "320x240 landscape display"
-	---help---
-		Define for 320x240 display "landscape" support. Default is this 320x240
-		"landscape" orientation.
-
-		For the STM3240G-EVAL board, the edge opposite from the row of buttons
-		is used as the top of the display in this orientation.
-
-config LCD_RLANDSCAPE
-	bool "320x240 reverse landscape display"
-	---help---
-		Define for 320x240 display "reverse landscape" support. Default is this 320x240
-		"landscape" orientation.
-
-		For the STM3240G-EVAL board, the edge next to the row of buttons
-		is used as the top of the display in this orientation.
-
-config LCD_PORTRAIT
-	bool "240x320 portrait display"
-	---help---
-		Define for 240x320 display "portrait" orientation support.  In this
-		orientation, the STM3210E-EVAL's LCD ribbon cable is at the bottom of
-		the display. Default is 320x240 "landscape" orientation.
-
-		In this orientation, the top of the display is to the left
-		of the buttons (if the board is held so that the buttons are at the
-		botton of the board).
-
-config LCD_RPORTRAIT
-	bool "240x320 reverse portrait display"
-	---help---
-		Define for 240x320 display "reverse portrait" orientation support.  In
-		this orientation, the STM3210E-EVAL's LCD ribbon cable is at the top
-		of the display. Default is 320x240 "landscape" orientation.
-
-		In this orientation, the top of the display is to the right
-		of the buttons (if the board is held so that the buttons are at the
-		botton of the board).
-
-endchoice
 
 config LCD_RDSHIFT
 	int "LCD data shift"

nuttx/drivers/lcd/Kconfig

@@ -173,3 +173,42 @@ config LCD_UG9664HSWAG01
 		ug-9664hswag01.c.  OLED Display Module, UG-9664HSWAG01", Univision
 		Technology Inc.  Used with the LPC Xpresso and Embedded Artists
 		base board.
+
+choice
+	prompt "LCD Orientation"
+	default LCD_LANDSCAPE
+	depends on LCD
+	---help---
+		Some LCD drivers may support displays in different orientations.
+		If the LCD driver supports this capability, than these are configuration
+		options to select that display orientation.
+
+config LCD_LANDSCAPE
+	bool "Landscape orientation"
+	---help---
+		Define for "landscape" orientation support.  Landscape mode refers one
+		of two orientations where the the display is wider than it is tall
+		(LCD_RLANDSCAPE is the other).  This is the default orientation.
+
+config LCD_PORTRAIT
+	bool "Portrait orientation"
+	---help---
+		Define for "portrait" orientation support.  Portrait mode refers one
+		of two orientations where the the display is taller than it is wide
+		(LCD_RPORTAIT is the other).
+
+config LCD_RPORTRAIT
+	bool "Reverse portrait display"
+	---help---
+		Define for "reverse portrait" orientation support.  Reverse portrait mode
+		refers one of two orientations where the the display is taller than it is
+		wide (LCD_PORTAIT is the other).
+
+config LCD_RLANDSCAPE
+	bool "Reverse landscape orientation"
+	---help---
+		Define for "reverse landscape" orientation support.  Reverse landscape mode
+		refers one of two orientations where the the display is wider than it is
+		tall (LCD_LANDSCAPE is the other).
+
+endchoice