Fix ENC28J60 Tx transmit (still a receive problem); Add HTTP 408 logic from Kate

git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5158 42af7a65-404d-4744-a932-0658087f49c3

apps/ChangeLog.txt

@@ -332,6 +332,7 @@
 	* apps/netutils/uip_listenon.c:  Logic in uip_server.c that creates
 	  the listening socket was moved to this new file to support re-use.
 	  Contributed by Kate.
-	* apps/netutils/webserver/httpd.c:  The option CONFIG_NETUTILS_HTTPD_SINGLETHREAD
-	  can now be used to limit the server to a single thread.  From Kate.
-
+	* apps/netutils/webserver/httpd.c:  The option CONFIG_NETUTILS_HTTPD_SINGLECONNECT
+	  can now be used to limit the server to a single thread.  Option
+	  CONFIG_NETUTILS_HTTPD_TIMEOUT can be used to generate HTTP 408 errors.
+	  Both from Kate.

apps/netutils/webserver/Kconfig

@@ -13,8 +13,8 @@ config NETUTILS_WEBSERVER
 
 if NETUTILS_WEBSERVER
 
-config NETUTILS_HTTPD_SINGLETHREAD
-	bool "Single Threded"
+config NETUTILS_HTTPD_SINGLECONNECT
+	bool "Single Connection"
 	default n if !DISABLE_PTHREAD
 	default y if DISABLE_PTHREAD
 	---help---
@@ -22,9 +22,9 @@ config NETUTILS_HTTPD_SINGLETHREAD
 		for each connection.  This can, however, use a lot of stack space 
 		if there are many connections and that can be a problem is RAM is
 		limited.  If this option is selected, then a single thread will
-		service all HTTP requests.  TCP_BACKLOG would be a good idea
-		in this case.
-	
+		service all HTTP requests and, in this case, only a single connection
+		at a time is supported at a time.
+
 config NETUTILS_HTTPD_SCRIPT_DISABLE
 	bool "Disable %! scripting"
 	default y if NETUTILS_HTTPD_SENDFILE
@@ -65,6 +65,14 @@ config NETUTILS_HTTPD_SERVERHEADER_DISABLE
 	---help---
 		This option, if selected, will elide the Server\: header
 
+config NETUTILS_HTTPD_TIMEOUT
+	int "Receive Timeout (sec)"
+	default 0
+	---help---
+		Receive timeout setting (in seconds).  A timeout value of zero
+		disables the timeout.  An HTTP 408 error is generated if the timeout
+		expires.
+
 choice
 	prompt "File Transfer Method"
 	default NETUTILS_HTTPD_CLASSIC

apps/netutils/webserver/httpd.c

@@ -57,7 +57,7 @@
 #include <errno.h>
 #include <debug.h>
 
-#ifndef CONFIG_NETUTILS_HTTPD_SINGLETHREAD
+#ifndef CONFIG_NETUTILS_HTTPD_SINGLECONNECT
 #  include <pthread.h>
 #endif
 
@@ -92,6 +92,14 @@
 #  define CONFIG_NETUTILS_HTTPD_PATH "/mnt"
 #endif
 
+/* The correct way to disable receive timeout errors is by setting the
+ * timeout to zero.
+ */
+
+#ifndef CONFIG_NETUTILS_HTTPD_TIMEOUT
+#  define CONFIG_NETUTILS_HTTPD_TIMEOUT 0
+#endif
+
 /****************************************************************************
  * Private Data
  ****************************************************************************/
@@ -116,6 +124,9 @@ static const char g_httpextensionjpg[]      = ".jpg";
 static const char g_httpextensionjs[]       = ".js";
 
 static const char g_http404path[]           = "/404.html";
+#if CONFIG_NETUTILS_HTTPD_TIMEOUT > 0
+static const char g_http408path[]           = "/408.html";
+#endif
 #ifndef CONFIG_NETUTILS_HTTPD_SCRIPT_DISABLE
 static const char g_httpindexpath[]         = "/index.shtml";
 #else
@@ -138,6 +149,15 @@ static const char g_httpheader404[]         =
 #endif
    "Connection: close\r\n";
 
+#if CONFIG_NETUTILS_HTTPD_TIMEOUT > 0
+static const char g_httpheader408[]         =
+   "HTTP/1.0 408 Request timed out\r\n"
+#ifndef CONFIG_NETUTILS_HTTPD_SERVERHEADER_DISABLE
+   "Server: uIP/1.0 http://www.sics.se/~adam/uip/\r\n"
+#endif
+   "Connection: close\r\n";
+#endif
+
 /****************************************************************************
  * Private Functions
  ****************************************************************************/
@@ -507,6 +527,28 @@ static inline int httpd_cmd(struct httpd_state *pstate)
   /* Get the next HTTP command.  We will handle only GET */
 
   recvlen = recv(pstate->ht_sockfd, pstate->ht_buffer, HTTPD_IOBUFFER_SIZE, 0);
+#if CONFIG_NETUTILS_HTTPD_TIMEOUT > 0
+  if (recvlen < 0 && errno == EWOULDBLOCK)
+    {
+      ndbg("[%d] recv timeout\n");
+      strncpy(pstate->ht_filename, g_httpindexpath, strlen(g_httpindexpath));
+
+      memcpy(pstate->ht_filename, g_http408path, strlen(g_http408path));
+      if (httpd_open(g_http408path, &pstate->ht_file) != OK)
+        {
+          return ERROR;
+        }
+
+      if (send_headers(pstate, g_httpheader408, strlen(g_httpheader408)) == OK)
+        {
+#ifdef CONFIG_NETUTILS_HTTPD_SENDFILE
+          return httpd_sendfile_send(pstate->ht_sockfd, &pstate->ht_file);
+#else
+          return httpd_addchunk(pstate, pstate->ht_file.data, pstate->ht_file.len);
+#endif
+        }
+    }
+#endif
   if (recvlen < 0)
     {
       ndbg("[%d] recv failed: %d\n", pstate->ht_sockfd, errno);
@@ -598,7 +640,7 @@ static void *httpd_handler(void *arg)
   return NULL;
 }
 
-#ifdef CONFIG_NETUTILS_HTTPD_SINGLETHREAD
+#ifdef CONFIG_NETUTILS_HTTPD_SINGLECONNECT
 static void single_server(uint16_t portno, pthread_startroutine_t handler, int stacksize)
 {
   struct sockaddr_in myaddr;
@@ -608,11 +650,14 @@ static void single_server(uint16_t portno, pthread_startroutine_t handler, int s
 #ifdef CONFIG_NET_HAVE_SOLINGER
   struct linger ling;
 #endif
+#if CONFIG_NETUTILS_HTTPD_TIMEOUT > 0
+  struct timeval tv;
+#endif
 
   listensd = uip_listenon(portno);
   if (listensd < 0)
     {
-      return ERROR;
+      return;
     }
 
   /* Begin serving connections */
@@ -643,12 +688,25 @@ static void single_server(uint16_t portno, pthread_startroutine_t handler, int s
         }
 #endif
 
+#if CONFIG_NETUTILS_HTTPD_TIMEOUT > 0
+      /* Set up a receive timeout */
+
+      tv.tv_sec  = CONFIG_NETUTILS_HTTPD_TIMEOUT;
+      tv.tv_usec = 0;
+      if (setsockopt(acceptsd, SOL_SOCKET, SO_RCVTIMEO, &tv, sizeof(struct timeval)) < 0)
+        {
+          close(acceptsd);
+          ndbg("setsockopt SO_RCVTIMEO failure: %d\n", errno);
+          break;;
+        }
+#endif
+
       /* Handle the request. This blocks until complete. */
 
       (void) httpd_handler((void*)acceptsd);
     }
 
-  return ERROR;
+  return;
 }
 #endif
 
@@ -668,7 +726,7 @@ int httpd_listen(void)
 {
   /* Execute httpd_handler on each connection to port 80 */
 
-#ifdef CONFIG_NETUTILS_HTTPD_SINGLETHREAD
+#ifdef CONFIG_NETUTILS_HTTPD_SINGLECONNECT
   single_server(HTONS(80), httpd_handler, CONFIG_NETUTILS_HTTPDSTACKSIZE);
 #else
   uip_server(HTONS(80), httpd_handler, CONFIG_NETUTILS_HTTPDSTACKSIZE);

nuttx/arch/arm/src/stm32/stm32_i2c.c

@@ -116,8 +116,10 @@
 
 /* Interrupt wait time timeout in system timer ticks */
 
-#define CONFIG_STM32_I2CTIMEOTICKS \
-  (SEC2TICK(CONFIG_STM32_I2CTIMEOSEC) + MSEC2TICK(CONFIG_STM32_I2CTIMEOMS))
+#ifndef CONFIG_STM32_I2CTIMEOTICKS
+#  define CONFIG_STM32_I2CTIMEOTICKS \
+    (SEC2TICK(CONFIG_STM32_I2CTIMEOSEC) + MSEC2TICK(CONFIG_STM32_I2CTIMEOMS))
+#endif
 
 #ifndef CONFIG_STM32_I2C_DYNTIMEO_STARTSTOP
 #  define CONFIG_STM32_I2C_DYNTIMEO_STARTSTOP TICK2USEC(CONFIG_STM32_I2CTIMEOTICKS)

nuttx/drivers/net/Kconfig

@@ -70,8 +70,15 @@ config ENC28J60_DUMPPACKET
 		If selected, the ENC28J60 driver  will dump the contents of each
 		packet to the console.
 
+config ENC28J60_REGDEBUG
+	bool "Register-Level Debug"
+	default n
+	depends on DEBUG && DEBUG_NET
+	---help---
+		Enable very low-level register access debug.  Depends on DEBUG and DEBUG_NET.
+
 endif
-	
+
 config NET_E1000
 	bool "E1000 support"
 	default n

nuttx/drivers/net/enc28j60.c

@@ -128,6 +128,12 @@
 #  warrning "CONFIG_NET_NOINTS should be set"
 #endif
 
+/* Low-level register debug */
+
+#if !defined(CONFIG_DEBUG) || !defined(CONFIG_DEBUG_NET)
+#  undef CONFIG_ENC28J60_REGDEBUG
+#endif
+
 /* Timing *******************************************************************/
 
 /* TX poll deley = 1 seconds. CLK_TCK is the number of clock ticks per second */
@@ -169,6 +175,20 @@
 
 #define BUF ((struct uip_eth_hdr *)priv->dev.d_buf)
 
+/* Debug ********************************************************************/
+
+#ifdef CONFIG_ENC28J60_REGDEBUG
+#  define enc_wrdump(a,v)   lib_lowprintf("ENC28J60: %02x<-%02x\n", a, v);
+#  define enc_rddump(a,v)   lib_lowprintf("ENC28J60: %02x->%02x\n", a, v);
+#  define enc_cmddump(c)    lib_lowprintf("ENC28J60: CMD: %02x\n", c);
+#  define enc_bmdump(c,b,s) lib_lowprintf("ENC28J60: CMD: %02x buffer: %p length: %d\n", c,b,s);
+#else
+#  define enc_wrdump(a,v)
+#  define enc_rddump(a,v)
+#  define enc_cmddump(c)
+#  define enc_bmdump(c,b,s)
+#endif
+
 /****************************************************************************
  * Private Types
  ****************************************************************************/
@@ -264,7 +284,7 @@ static int enc_waitbreg(FAR struct enc_driver_s *priv, uint8_t ctrlreg,
 
 static void enc_rdbuffer(FAR struct enc_driver_s *priv, FAR uint8_t *buffer,
          size_t buflen);
-static void enc_wrbuffer(FAR struct enc_driver_s *priv,
+static inline void enc_wrbuffer(FAR struct enc_driver_s *priv,
          FAR const uint8_t *buffer, size_t buflen);
 
 /* PHY register access */
@@ -498,6 +518,8 @@ static uint8_t enc_rdgreg2(FAR struct enc_driver_s *priv, uint8_t cmd)
   /* De-select ENC28J60 chip */
 
   enc_deselect(priv);
+
+  enc_rddump(cmd, rddata);
   return rddata;
 }
 
@@ -539,6 +561,7 @@ static void enc_wrgreg2(FAR struct enc_driver_s *priv, uint8_t cmd,
   /* De-select ENC28J60 chip. */
 
   enc_deselect(priv);
+  enc_wrdump(cmd, wrdata);
 }
 
 /****************************************************************************
@@ -592,6 +615,7 @@ static inline void enc_src(FAR struct enc_driver_s *priv)
   /* De-select ENC28J60 chip. */
 
   enc_deselect(priv);
+  enc_cmddump(ENC_SRC);
 }
 
 /****************************************************************************
@@ -688,6 +712,7 @@ static uint8_t enc_rdbreg(FAR struct enc_driver_s *priv, uint8_t ctrlreg)
   /* De-select ENC28J60 chip */
 
   enc_deselect(priv);
+  enc_rddump(ENC_RCR | GETADDR(ctrlreg), rddata);
   return rddata;
 }
 
@@ -734,6 +759,7 @@ static void enc_wrbreg(FAR struct enc_driver_s *priv, uint8_t ctrlreg,
   /* De-select ENC28J60 chip. */
 
   enc_deselect(priv);
+  enc_wrdump(ENC_WCR | GETADDR(ctrlreg), wrdata);
 }
 
 /****************************************************************************
@@ -816,6 +842,7 @@ static void enc_rdbuffer(FAR struct enc_driver_s *priv, FAR uint8_t *buffer,
   /* De-select ENC28J60 chip. */
 
   enc_deselect(priv);
+  enc_bmdump(ENC_WBM, buffer, buflen);
 }
 
 /****************************************************************************
@@ -837,26 +864,68 @@ static void enc_rdbuffer(FAR struct enc_driver_s *priv, FAR uint8_t *buffer,
  *
  ****************************************************************************/
 
-static void enc_wrbuffer(FAR struct enc_driver_s *priv,
-                         FAR const uint8_t *buffer, size_t buflen)
+static inline void enc_wrbuffer(FAR struct enc_driver_s *priv,
+                                FAR const uint8_t *buffer, size_t buflen)
 {
   DEBUGASSERT(priv && priv->spi);
 
-  /* Select ENC28J60 chip */
+  /* Select ENC28J60 chip
+   *
+   * "The WBM command is started by lowering the CS pin. ..."
+   */
 
   enc_select(priv);
 
-  /* Send the write buffer memory command (ignoring the response) */
+  /* Send the write buffer memory command (ignoring the response)
+   *
+   * "...The [3-bit]WBM opcode should then be sent to the ENC28J60,
+   *  followed by the 5-bit constant, 1Ah."
+   */
 
   (void)SPI_SEND(priv->spi, ENC_WBM);
  
-  /* Then send the buffer */
+  /* "...the ENC28J60 requires a single per packet control byte to
+   * precede the packet for transmission."
+   *
+   * POVERRIDE: Per Packet Override bit (Not set):
+   *   1 = The values of PCRCEN, PPADEN and PHUGEEN will override the
+   *       configuration defined by MACON3.
+   *   0 = The values in MACON3 will be used to determine how the packet
+   *       will be transmitted
+   * PCRCEN: Per Packet CRC Enable bit (Set, but won't be used because
+   *   POVERRIDE is zero).
+   * PPADEN: Per Packet Padding Enable bit (Set, but won't be used because
+   *   POVERRIDE is zero).
+   * PHUGEEN: Per Packet Huge Frame Enable bit (Set, but won't be used
+   *   because POVERRIDE is zero).
+   */
+
+  (void)SPI_SEND(priv->spi,
+                 (PKTCTRL_PCRCEN | PKTCTRL_PPADEN | PKTCTRL_PHUGEEN));
+
+  /* Then send the buffer
+   *
+   * "... After the WBM command and constant are sent, the data to
+   *  be stored in the memory pointed to by EWRPT should be shifted
+   *  out MSb first to the ENC28J60. After 8 data bits are received,
+   *  the Write Pointer will automatically increment if AUTOINC is
+   *  set. The host controller can continue to provide clocks on the
+   *  SCK pin and send data on the SI pin, without raising CS, to
+   *  keep writing to the memory. In this manner, with AUTOINC
+   *  enabled, it is possible to continuously write sequential bytes
+   *  to the buffer memory without any extra SPI command
+   *  overhead.
+   */
 
   SPI_SNDBLOCK(priv->spi, buffer, buflen);
 
-  /* De-select ENC28J60 chip. */
+  /* De-select ENC28J60 chip
+   *
+   * "The WBM command is terminated by bringing up the CS pin. ..."
+   */
 
   enc_deselect(priv);
+  enc_bmdump(ENC_WBM, buffer, buflen);
 }
 
 /****************************************************************************
@@ -984,6 +1053,11 @@ static int enc_transmit(FAR struct enc_driver_s *priv)
 
   enc_dumppacket("Transmit Packet", priv->dev.d_buf, priv->dev.d_len);
 
+  /* Set transmit buffer start (is this necessary?). */
+
+  enc_wrbreg(priv, ENC_ETXSTL, PKTMEM_TX_START & 0xff);
+  enc_wrbreg(priv, ENC_ETXSTH, PKTMEM_TX_START >> 8);
+
   /* Reset the write pointer to start of transmit buffer */
 
   enc_wrbreg(priv, ENC_EWRPTL, PKTMEM_TX_START & 0xff);
@@ -995,11 +1069,9 @@ static int enc_transmit(FAR struct enc_driver_s *priv)
   enc_wrbreg(priv, ENC_ETXNDL, txend & 0xff);
   enc_wrbreg(priv, ENC_ETXNDH, txend >> 8);
 
-  /* Write the per-packet control byte into the transmit buffer */
-
-  enc_wrgreg(priv, ENC_WBM, 0x00);
-
-  /* Copy the packet itself into the transmit buffer */
+  /* Send the WBM command and copy the packet itself into the transmit
+   * buffer at the position of the EWRPT register.
+   */
 
   enc_wrbuffer(priv, priv->dev.d_buf, priv->dev.d_len);
 

nuttx/lib/misc/lib_sendfile.c

@@ -294,4 +294,4 @@ ssize_t sendfile(int outfd, int infd, off_t *offset, size_t count)
   return ntransferred;
 }
 
-#endif /* CONFIG_NSOCKET_DESCRIPTORS > 0 || CONFIG_NFILE_DESCRIPTORS > 0 */
+#endif /* CONFIG_NSOCKET_DESCRIPTORS > 0 || CONFIG_NFILE_DESCRIPTORS > 0 */