[Kconfig] python script doesn't remove delta, thus we've to manually add remove deltas

boards/cuav/x7pro/test.px4board

@@ -1,2 +1,8 @@
+CONFIG_DRIVERS_IRLOCK=n
+CONFIG_DRIVERS_ROBOCLAW=n
+CONFIG_DRIVERS_RPM=n
+CONFIG_MODULES_ATTITUDE_ESTIMATOR_Q=n
+CONFIG_MODULES_LOCAL_POSITION_ESTIMATOR=n
+CONFIG_MODULES_ROVER_POS_CONTROL=n
 CONFIG_BOARD_TESTING=y
 CONFIG_DRIVERS_TEST_PPM=y

boards/cubepilot/cubeorange/test.px4board

@@ -1,2 +1,10 @@
+CONFIG_DRIVERS_ADC_ADS1115=n
+CONFIG_DRIVERS_IMU_ANALOG_DEVICES_ADIS16448=n
+CONFIG_DRIVERS_PCA9685_PWM_OUT=n
+CONFIG_MODULES_ATTITUDE_ESTIMATOR_Q=n
+CONFIG_MODULES_LOCAL_POSITION_ESTIMATOR=n
+CONFIG_MODULES_ROVER_POS_CONTROL=n
+CONFIG_MODULES_SIH=n
+CONFIG_MODULES_TEMPERATURE_COMPENSATION=n
 CONFIG_BOARD_TESTING=y
 CONFIG_DRIVERS_TEST_PPM=y

boards/nxp/fmuk66-v3/default.px4board

@@ -13,6 +13,7 @@ CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
 CONFIG_DRIVERS_DIFFERENTIAL_PRESSURE=y
+CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DISTANCE_SENSOR_SRF05=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_FXAS21002C=y

boards/px4/fmu-v5/debug.px4board

@@ -1,3 +1,35 @@
+# CONFIG_BOARD_UAVCAN_TIMER_OVERRIDE is not set
+CONFIG_DRIVERS_ADC_ADS1115=n
+CONFIG_DRIVERS_BATT_SMBUS=n
+CONFIG_DRIVERS_DIFFERENTIAL_PRESSURE=n
+CONFIG_DRIVERS_DSHOT=n
+CONFIG_DRIVERS_HEATER=n
+CONFIG_DRIVERS_IMU_ANALOG_DEVICES_ADIS16448=n
+CONFIG_DRIVERS_IMU_INVENSENSE_ICM20602=n
+CONFIG_DRIVERS_IMU_INVENSENSE_ICM20948=n
+CONFIG_DRIVERS_IRLOCK=n
+CONFIG_DRIVERS_OSD=n
+CONFIG_DRIVERS_PCA9685=n
+CONFIG_DRIVERS_PCA9685_PWM_OUT=n
+CONFIG_DRIVERS_POWER_MONITOR_INA226=n
+CONFIG_DRIVERS_PWM_INPUT=n
+CONFIG_DRIVERS_ROBOCLAW=n
+CONFIG_DRIVERS_RPM=n
+CONFIG_DRIVERS_UAVCAN=n
+CONFIG_MODULES_ATTITUDE_ESTIMATOR_Q=n
+CONFIG_MODULES_CAMERA_FEEDBACK=n
+CONFIG_MODULES_ESC_BATTERY=n
+CONFIG_MODULES_GYRO_CALIBRATION=n
+CONFIG_MODULES_GYRO_FFT=n
+CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=n
+CONFIG_MODULES_LOCAL_POSITION_ESTIMATOR=n
+CONFIG_MODULES_ROVER_POS_CONTROL=n
+CONFIG_MODULES_SIH=n
+CONFIG_MODULES_TEMPERATURE_COMPENSATION=n
+CONFIG_MODULES_UUV_ATT_CONTROL=n
+CONFIG_MODULES_UUV_POS_CONTROL=n
+CONFIG_MODULES_VMOUNT=n
+CONFIG_SYSTEMCMDS_SERIAL_TEST=n
 CONFIG_BOARD_CONSTRAINED_FLASH=y
 CONFIG_BOARD_TESTING=y
 CONFIG_COMMON_DISTANCE_SENSOR=y

boards/px4/fmu-v5/stackcheck.px4board

@@ -1,3 +1,33 @@
+# CONFIG_BOARD_UAVCAN_TIMER_OVERRIDE is not set
+CONFIG_DRIVERS_BATT_SMBUS=n
+CONFIG_DRIVERS_CAMERA_CAPTURE=n
+CONFIG_DRIVERS_CAMERA_TRIGGER=n
+CONFIG_DRIVERS_HEATER=n
+CONFIG_DRIVERS_IMU_ANALOG_DEVICES_ADIS16448=n
+CONFIG_DRIVERS_IMU_BOSCH_BMI055=n
+CONFIG_DRIVERS_IMU_INVENSENSE_ICM20602=n
+CONFIG_DRIVERS_IMU_INVENSENSE_ICM20948=n
+CONFIG_DRIVERS_IRLOCK=n
+CONFIG_DRIVERS_OSD=n
+CONFIG_DRIVERS_PCA9685=n
+CONFIG_DRIVERS_PCA9685_PWM_OUT=n
+CONFIG_DRIVERS_POWER_MONITOR_INA226=n
+CONFIG_DRIVERS_PWM_INPUT=n
+CONFIG_DRIVERS_ROBOCLAW=n
+CONFIG_DRIVERS_RPM=n
+CONFIG_DRIVERS_SMART_BATTERY_BATMON=n
+CONFIG_DRIVERS_UAVCAN=n
+CONFIG_MODULES_ATTITUDE_ESTIMATOR_Q=n
+CONFIG_MODULES_CAMERA_FEEDBACK=n
+CONFIG_MODULES_ESC_BATTERY=n
+CONFIG_MODULES_GYRO_CALIBRATION=n
+CONFIG_MODULES_GYRO_FFT=n
+CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=n
+CONFIG_MODULES_LOCAL_POSITION_ESTIMATOR=n
+CONFIG_MODULES_ROVER_POS_CONTROL=n
+CONFIG_MODULES_SIH=n
+CONFIG_MODULES_TEMPERATURE_COMPENSATION=n
+CONFIG_MODULES_VMOUNT=n
 CONFIG_BOARD_CONSTRAINED_FLASH=y
 CONFIG_BOARD_TESTING=y
 CONFIG_COMMON_DISTANCE_SENSOR=y

boards/px4/sitl/test.px4board

@@ -1,3 +1,3 @@
-CONFIG_DRIVERS_DISTANCE_SENSOR_LIGHTWARE_LASER_SERIAL=y
 CONFIG_BOARD_NOLOCKSTEP=y
+CONFIG_DRIVERS_DISTANCE_SENSOR_LIGHTWARE_LASER_SERIAL=y
 CONFIG_MODULES_CONTROL_ALLOCATOR=y