update the skywalker x5 script

ROMFS/px4fmu_common/init.d/3032_skywalker_x5

@@ -1,58 +1,14 @@
 #!nsh
-
-echo "[init] PX4FMU v1, v2 with or without IO on Skywalker X5"
-
-#
-# Load default params for this platform
 #
-if param compare SYS_AUTOCONFIG 1
+# Skywalker X5 Flying Wing
-then
-	# Set all params here, then disable autoconfig
-	# TODO
-	
-	param set SYS_AUTOCONFIG 0
-	param save
-fi
- 
-#
-# Force some key parameters to sane values
-# MAV_TYPE     1 = fixed wing
-#
-param set MAV_TYPE 1
-
 #
-# Start and configure PX4IO or FMU interface
+# Maintainers: Thomas Gubler <thomasgubler@gmail.com>, Julian Oes <joes@student.ethz.ch>
 #
-if px4io detect
-then
-	# Start MAVLink (depends on orb)
-	mavlink start
-
-	sh /etc/init.d/rc.io
-	# Limit to 100 Hz updates and (implicit) 50 Hz PWM
-	px4io limit 100
-else
-	# Start MAVLink (on UART1 / ttyS0)
-	mavlink start -d /dev/ttyS0
 
-	fmu mode_pwm
+if [ $DO_AUTOCONFIG == yes ]
-	param set BAT_V_SCALING 0.004593
-	set EXIT_ON_END yes
-fi
-
-#
-# Load mixer and start controllers (depends on px4io)
-#
-if [ -f /fs/microsd/etc/mixers/FMU_Q.mix ]
 then
-	echo "Using /fs/microsd/etc/mixers/FMU_Q.mix"
+	# TODO
-	mixer load /dev/pwm_output /fs/microsd/etc/mixers/FMU_Q.mix
-else
-	echo "Using /etc/mixers/FMU_Q.mix"
-	mixer load /dev/pwm_output /etc/mixers/FMU_Q.mix
 fi
 
-#
+set VEHICLE_TYPE fw
-# Start common fixedwing apps
+set FRAME_GEOMETRY Q
-#
-sh /etc/init.d/rc.fixedwing