Organize, alphabetize, and deprecate unneeded #includes from the barometer drivers.

src/drivers/barometer/bmp280/bmp280.cpp

@@ -36,40 +36,8 @@
  * Driver for the BMP280 barometric pressure sensor connected via I2C TODO or SPI.
  */
 
-#include <px4_config.h>
-
-#include <sys/types.h>
-#include <stdint.h>
-#include <stdbool.h>
-#include <stdlib.h>
-#include <semaphore.h>
-#include <string.h>
-#include <fcntl.h>
-#include <poll.h>
-#include <errno.h>
-#include <stdio.h>
-#include <math.h>
-#include <unistd.h>
-#include <px4_getopt.h>
-#include <px4_log.h>
-
-#include <nuttx/arch.h>
-#include <nuttx/clock.h>
-
-#include <arch/board/board.h>
-#include <board_config.h>
 #include "bmp280.h"
 
-#include <lib/cdev/CDev.hpp>
-#include <drivers/drv_baro.h>
-#include <drivers/drv_hrt.h>
-#include <drivers/device/ringbuffer.h>
-
-#include <perf/perf_counter.h>
-#include <systemlib/err.h>
-#include <px4_work_queue/ScheduledWorkItem.hpp>
-
-
 enum BMP280_BUS {
 	BMP280_BUS_ALL = 0,
 	BMP280_BUS_I2C_INTERNAL,

src/drivers/barometer/bmp280/bmp280.h

@@ -38,6 +38,23 @@
  */
 #pragma once
 
+#include <math.h>
+#include <string.h>
+
+#include <drivers/drv_baro.h>
+#include <drivers/drv_hrt.h>
+#include <drivers/device/i2c.h>
+#include <drivers/device/ringbuffer.h>
+#include <drivers/device/spi.h>
+#include <lib/cdev/CDev.hpp>
+#include <perf/perf_counter.h>
+#include <px4_config.h>
+#include <px4_getopt.h>
+#include <px4_work_queue/ScheduledWorkItem.hpp>
+
+#include "board_config.h"
+
+
 #define BMP280_ADDR_CAL		0x88	/* address of 12x 2 bytes calibration data */
 #define BMP280_ADDR_DATA	0xF7	/* address of 2x 3 bytes p-t data */
 

src/drivers/barometer/bmp280/bmp280_i2c.cpp

@@ -37,12 +37,8 @@
  * SPI interface for BMP280
  */
 
-#include <px4_config.h>
 
 #include "bmp280.h"
-#include <drivers/device/i2c.h>
-
-#include "board_config.h"
 
 #if defined(PX4_I2C_OBDEV_BMP280) || defined(PX4_I2C_EXT_OBDEV_BMP280)
 

src/drivers/barometer/bmp280/bmp280_spi.cpp

@@ -37,12 +37,8 @@
  * SPI interface for BMP280
  */
 
-#include <px4_config.h>
-
 #include "bmp280.h"
-#include <drivers/device/spi.h>
 
-#include "board_config.h"
 
 /* SPI protocol address bits */
 #define DIR_READ			(1<<7)  //for set

src/drivers/barometer/lps22hb/LPS22HB.cpp

@@ -39,8 +39,6 @@
 
 #include "LPS22HB.hpp"
 
-#include <cstring>
-
 /* Max measurement rate is 25Hz */
 #define LPS22HB_CONVERSION_INTERVAL	(1000000 / 25)	/* microseconds */
 

src/drivers/barometer/lps22hb/LPS22HB.hpp

@@ -33,22 +33,19 @@
 
 #pragma once
 
-#include <lib/cdev/CDev.hpp>
+#include <cstring>
-#include <drivers/device/Device.hpp>
-#include <px4_config.h>
-#include <px4_work_queue/ScheduledWorkItem.hpp>
-
-#include <perf/perf_counter.h>
 
+#include <drivers/device/Device.hpp>
+#include <drivers/device/i2c.h>
+#include <drivers/device/spi.h>
 #include <drivers/drv_baro.h>
-#include <drivers/drv_hrt.h>
+#include <lib/cdev/CDev.hpp>
-#include <drivers/device/ringbuffer.h>
+#include <perf/perf_counter.h>
-#include <drivers/drv_device.h>
+#include <px4_getopt.h>
+#include <px4_work_queue/ScheduledWorkItem.hpp>
 #include <systemlib/err.h>
-
 #include <uORB/uORB.h>
 
-#include <float.h>
 
 static constexpr uint8_t WHO_AM_I = 0x0F;
 static constexpr uint8_t LPS22HB_ID_WHO_AM_I = 0xB1;

src/drivers/barometer/lps22hb/LPS22HB_I2C.cpp

@@ -39,15 +39,6 @@
 
 #include "LPS22HB.hpp"
 
-#include <cstring>
-
-#include <px4_config.h>
-
-#include <drivers/device/i2c.h>
-#include <drivers/drv_device.h>
-
-#include "board_config.h"
-
 #define LPS22HB_ADDRESS		0x5D
 
 device::Device *LPS22HB_I2C_interface(int bus);

src/drivers/barometer/lps22hb/LPS22HB_SPI.cpp

@@ -39,13 +39,6 @@
 
 #include "LPS22HB.hpp"
 
-#include <cstring>
-
-#include <px4_config.h>
-
-#include <drivers/device/spi.h>
-#include <drivers/drv_device.h>
-
 #ifdef PX4_SPIDEV_LPS22HB
 
 /* SPI protocol address bits */

src/drivers/barometer/lps22hb/lps22hb_main.cpp

@@ -33,10 +33,6 @@
 
 #include "LPS22HB.hpp"
 
-#include <px4_getopt.h>
-
-#include <cstring>
-
 extern "C" __EXPORT int lps22hb_main(int argc, char *argv[]);
 
 enum LPS22HB_BUS {

src/drivers/barometer/lps25h/lps25h.cpp

@@ -37,44 +37,6 @@
  * Driver for the LPS25H barometer connected via I2C or SPI.
  */
 
-#include <px4_config.h>
-
-#include <lib/cdev/CDev.hpp>
-#include <drivers/device/Device.hpp>
-#include <drivers/device/i2c.h>
-
-#include <sys/types.h>
-#include <stdint.h>
-#include <stdlib.h>
-#include <stdbool.h>
-#include <semaphore.h>
-#include <string.h>
-#include <fcntl.h>
-#include <poll.h>
-#include <errno.h>
-#include <stdio.h>
-#include <math.h>
-#include <unistd.h>
-
-#include <nuttx/arch.h>
-#include <px4_work_queue/ScheduledWorkItem.hpp>
-#include <nuttx/clock.h>
-
-#include <board_config.h>
-
-#include <perf/perf_counter.h>
-#include <systemlib/err.h>
-
-#include <drivers/drv_baro.h>
-#include <drivers/drv_hrt.h>
-#include <drivers/device/ringbuffer.h>
-#include <drivers/drv_device.h>
-
-#include <uORB/uORB.h>
-
-#include <float.h>
-#include <px4_getopt.h>
-
 #include "lps25h.h"
 
 /*

src/drivers/barometer/lps25h/lps25h.h

@@ -39,6 +39,21 @@
 
 #pragma once
 
+#include <string.h>
+
+#include <drivers/device/Device.hpp>
+#include <drivers/device/i2c.h>
+#include <drivers/device/ringbuffer.h>
+#include <drivers/device/spi.h>
+#include <drivers/drv_baro.h>
+#include <lib/cdev/CDev.hpp>
+#include <perf/perf_counter.h>
+#include <px4_getopt.h>
+#include <px4_work_queue/ScheduledWorkItem.hpp>
+#include <systemlib/err.h>
+#include <uORB/uORB.h>
+
+
 #define ADDR_WHO_AM_I		0x0F
 
 #define ID_WHO_AM_I		0xBD

src/drivers/barometer/lps25h/lps25h_i2c.cpp

@@ -37,28 +37,8 @@
  * I2C interface for LPS25H
  */
 
-/* XXX trim includes */
-#include <px4_config.h>
-
-#include <sys/types.h>
-#include <stdint.h>
-#include <stdbool.h>
-#include <string.h>
-#include <assert.h>
-#include <debug.h>
-#include <errno.h>
-#include <unistd.h>
-
-#include <arch/board/board.h>
-
-#include <drivers/device/i2c.h>
-#include <drivers/drv_mag.h>
-#include <drivers/drv_device.h>
-
 #include "lps25h.h"
 
-#include "board_config.h"
-
 #define LPS25H_ADDRESS		0x5D
 
 device::Device *LPS25H_I2C_interface(int bus);

src/drivers/barometer/lps25h/lps25h_spi.cpp

@@ -37,26 +37,7 @@
  * SPI interface for LPS25H
  */
 
-/* XXX trim includes */
-#include <px4_config.h>
-
-#include <sys/types.h>
-#include <stdint.h>
-#include <stdbool.h>
-#include <string.h>
-#include <assert.h>
-#include <debug.h>
-#include <errno.h>
-#include <unistd.h>
-
-#include <arch/board/board.h>
-
-#include <drivers/device/spi.h>
-#include <drivers/drv_mag.h>
-#include <drivers/drv_device.h>
-
 #include "lps25h.h"
-#include <board_config.h>
 
 #ifdef PX4_SPIDEV_HMC
 

src/drivers/barometer/mpl3115a2/mpl3115a2.cpp

@@ -37,44 +37,8 @@
  * Driver for the MPL3115A2 barometric pressure sensor connected via I2C.
  */
 
-#include <lib/cdev/CDev.hpp>
-#include <drivers/device/Device.hpp>
-#include <px4_config.h>
-#include <px4_log.h>
-
-#include <sys/types.h>
-#include <stdint.h>
-#include <stdbool.h>
-#include <stdlib.h>
-#include <semaphore.h>
-#include <string.h>
-#include <fcntl.h>
-#include <poll.h>
-#include <errno.h>
-#include <stdio.h>
-#include <math.h>
-#include <unistd.h>
-#include <px4_getopt.h>
-
-#include <nuttx/arch.h>
-#include <px4_work_queue/ScheduledWorkItem.hpp>
-#include <nuttx/clock.h>
-
-#include <arch/board/board.h>
-#include <board_config.h>
-
-#include <drivers/device/device.h>
-#include <drivers/drv_baro.h>
-#include <drivers/drv_hrt.h>
-#include <drivers/device/ringbuffer.h>
-
-#include <perf/perf_counter.h>
-#include <systemlib/err.h>
-
 #include "mpl3115a2.h"
 
-
-
 enum MPL3115A2_BUS {
 	MPL3115A2_BUS_ALL = 0,
 	MPL3115A2_BUS_I2C_INTERNAL,

src/drivers/barometer/mpl3115a2/mpl3115a2.h

@@ -38,6 +38,40 @@
  */
 
 #pragma once
+#include <assert.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <poll.h>
+#include <semaphore.h>
+#include <stdbool.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/types.h>
+#include <math.h>
+#include <unistd.h>
+
+#include <arch/board/board.h>
+#include <board_config.h>
+#include <drivers/device/device.h>
+#include <drivers/device/Device.hpp>
+#include <drivers/device/i2c.h>
+#include <drivers/device/ringbuffer.h>
+#include <drivers/drv_baro.h>
+#include <drivers/drv_hrt.h>
+#include <lib/cdev/CDev.hpp>
+#include <nuttx/arch.h>
+#include <nuttx/clock.h>
+#include <perf/perf_counter.h>
+#include <px4_config.h>
+#include <px4_defines.h>
+#include <px4_getopt.h>
+#include <px4_log.h>
+#include <px4_work_queue/ScheduledWorkItem.hpp>
+#include <systemlib/err.h>
+
+#include "board_config.h"
 
 #define MPL3115A2_REG_WHO_AM_I   0x0c
 #define MPL3115A2_WHO_AM_I       0xC4

src/drivers/barometer/mpl3115a2/mpl3115a2_i2c.cpp

@@ -37,25 +37,8 @@
  * I2C interface for MPL3115A2
  */
 
-/* XXX trim includes */
-#include <px4_config.h>
-#include <px4_defines.h>
-
-#include <sys/types.h>
-#include <stdint.h>
-#include <stdbool.h>
-#include <assert.h>
-#include <errno.h>
-#include <unistd.h>
-
-#include <arch/board/board.h>
-
-#include <drivers/device/i2c.h>
-
 #include "mpl3115a2.h"
 
-#include "board_config.h"
-
 #define MPL3115A2_ADDRESS        0x60
 
 device::Device *MPL3115A2_i2c_interface(uint8_t busnum);

src/drivers/barometer/ms5611/ms5611.cpp

@@ -36,32 +36,6 @@
  * Driver for the MS5611 and MS5607 barometric pressure sensor connected via I2C or SPI.
  */
 
-#include <px4_config.h>
-
-#include <sys/types.h>
-#include <stdint.h>
-#include <stdbool.h>
-#include <stdlib.h>
-#include <semaphore.h>
-#include <string.h>
-#include <fcntl.h>
-#include <poll.h>
-#include <errno.h>
-#include <stdio.h>
-#include <math.h>
-#include <unistd.h>
-
-#include <board_config.h>
-
-#include <drivers/device/device.h>
-#include <drivers/drv_baro.h>
-#include <drivers/drv_hrt.h>
-#include <drivers/device/ringbuffer.h>
-#include <lib/perf/perf_counter.h>
-#include <systemlib/err.h>
-#include <platforms/px4_getopt.h>
-#include <px4_work_queue/ScheduledWorkItem.hpp>
-
 #include "ms5611.h"
 
 enum MS56XX_DEVICE_TYPES {

src/drivers/barometer/ms5611/ms5611.h

@@ -37,6 +37,24 @@
  * Shared defines for the ms5611 driver.
  */
 
+#pragma once
+
+#include <string.h>
+
+#include <drivers/device/i2c.h>
+#include <drivers/device/device.h>
+#include <drivers/device/ringbuffer.h>
+#include <drivers/device/spi.h>
+#include <drivers/drv_baro.h>
+#include <lib/cdev/CDev.hpp>
+#include <lib/perf/perf_counter.h>
+#include <platforms/px4_getopt.h>
+#include <px4_work_queue/ScheduledWorkItem.hpp>
+#include <systemlib/err.h>
+#include <uORB/uORB.h>
+
+#include "board_config.h"
+
 #define ADDR_RESET_CMD			0x1E	/* write to this address to reset chip */
 #define ADDR_PROM_SETUP			0xA0	/* address of 8x 2 bytes factory and calibration data */
 

src/drivers/barometer/ms5611/ms5611_i2c.cpp

@@ -37,26 +37,8 @@
  * I2C interface for MS5611
  */
 
-/* XXX trim includes */
-#include <px4_config.h>
-#include <px4_defines.h>
-#include <px4_time.h>
-
-#include <sys/types.h>
-#include <stdint.h>
-#include <stdbool.h>
-#include <assert.h>
-#include <errno.h>
-#include <unistd.h>
-
-#include <arch/board/board.h>
-
-#include <drivers/device/i2c.h>
-
 #include "ms5611.h"
 
-#include "board_config.h"
-
 #define MS5611_ADDRESS_1		0x76	/* address select pins pulled high (PX4FMU series v1.6+) */
 #define MS5611_ADDRESS_2		0x77    /* address select pins pulled low (PX4FMU prototypes) */
 

src/drivers/barometer/ms5611/ms5611_spi.cpp

@@ -37,23 +37,7 @@
  * SPI interface for MS5611
  */
 
-/* XXX trim includes */
-#include <px4_time.h>
-#include <px4_config.h>
-
-#include <sys/types.h>
-#include <stdint.h>
-#include <stdbool.h>
-#include <assert.h>
-#include <errno.h>
-#include <unistd.h>
-
-#include <arch/board/board.h>
-
-#include <drivers/device/spi.h>
-
 #include "ms5611.h"
-#include "board_config.h"
 
 /* SPI protocol address bits */
 #define DIR_READ			(1<<7)