zrzk
/
px4_autopilot
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Merge branch 'master' of github.com:PX4/Firmware

sbg
Lorenz Meier 11 years ago
parent
fdc7aa3be2 7e855b5a23
commit
fbafeab792
15 changed files with 386 additions and 267 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 58
      ROMFS/px4fmu_common/init.d/1000_rc_fw_easystar.hil
  2. 56
      ROMFS/px4fmu_common/init.d/1002_rc_fw_state.hil
  3. 1
      ROMFS/px4fmu_common/init.d/1004_rc_fw_Rascal110.hil
  4. 37
      ROMFS/px4fmu_common/init.d/12001_octo_cox_pwm
  5. 48
      ROMFS/px4fmu_common/init.d/2101_hk_bixler
  6. 48
      ROMFS/px4fmu_common/init.d/2102_3dr_skywalker
  7. 84
      ROMFS/px4fmu_common/init.d/3030_io_camflyer
  8. 33
      ROMFS/px4fmu_common/init.d/3032_skywalker_x5
  9. 37
      ROMFS/px4fmu_common/init.d/5001_quad_+_pwm
  10. 37
      ROMFS/px4fmu_common/init.d/6001_hexa_x_pwm
  11. 37
      ROMFS/px4fmu_common/init.d/7001_hexa_+_pwm
  12. 37
      ROMFS/px4fmu_common/init.d/8001_octo_x_pwm
  13. 37
      ROMFS/px4fmu_common/init.d/9001_octo_+_pwm
  14. 9
      ROMFS/px4fmu_common/init.d/cmp_test
  15. 94
      ROMFS/px4fmu_common/init.d/rc.autostart

58
ROMFS/px4fmu_common/init.d/1000_rc_fw_easystar.hil
Unescape View File

@ -1,14 +1,13 @@ @@ -1,14 +1,13 @@
#!nsh
#
# USB HIL start
# HILStar / X-Plane
#
# Maintainers: Thomas Gubler <thomasgubler@gmail.com>
#
echo "[HIL] HILStar starting.."
echo "HIL Rascal 110 starting.."
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
if [ $DO_AUTOCONFIG == yes ]
then
# Set all params here, then disable autoconfig
@ -40,48 +39,7 @@ then @@ -40,48 +39,7 @@ then
param save
fi
# Allow USB some time to come up
sleep 1
# Tell MAVLink that this link is "fast"
mavlink start -b 230400 -d /dev/ttyACM0
# Create a fake HIL /dev/pwm_output interface
hil mode_pwm
#
# Force some key parameters to sane values
# MAV_TYPE 1 = fixed wing, 2 = quadrotor, 13 = hexarotor
# see https://pixhawk.ethz.ch/mavlink/
#
param set MAV_TYPE 1
#
# Check if we got an IO
#
if px4io start
then
echo "IO started"
else
fmu mode_serial
echo "FMU started"
fi
#
# Start the sensors (depends on orb, px4io)
#
sh /etc/init.d/rc.sensors
#
# Start the attitude estimator (depends on orb)
#
att_pos_estimator_ekf start
#
# Load mixer and start controllers (depends on px4io)
#
mixer load /dev/pwm_output /etc/mixers/FMU_AET.mix
fw_pos_control_l1 start
fw_att_control start
echo "[HIL] setup done, running"
set HIL yes
set VEHICLE_TYPE fw
set MIXER FMU_AERT

56
ROMFS/px4fmu_common/init.d/1002_rc_fw_state.hil
Unescape View File

@ -1,14 +1,13 @@ @@ -1,14 +1,13 @@
#!nsh
#
# USB HIL start
# HIL Rascal 110 (Flightgear)
#
# Maintainers: Thomas Gubler <thomasgubler@gmail.com>
#
echo "[HIL] HILStar starting in state-HIL mode.."
echo "HIL Rascal 110 starting.."
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
if [ $DO_AUTOCONFIG == yes ]
then
# Set all params here, then disable autoconfig
@ -32,48 +31,15 @@ then @@ -32,48 +31,15 @@ then
param set FW_T_SINK_MAX 5.0
param set FW_T_SINK_MIN 4.0
param set FW_Y_ROLLFF 1.1
param set FW_L1_PERIOD 16
param set RC_SCALE_ROLL 1.0
param set RC_SCALE_PITCH 1.0
param set SYS_AUTOCONFIG 0
param save
fi
# Allow USB some time to come up
sleep 1
# Tell MAVLink that this link is "fast"
mavlink start -b 230400 -d /dev/ttyACM0
# Create a fake HIL /dev/pwm_output interface
hil mode_pwm
#
# Force some key parameters to sane values
# MAV_TYPE 1 = fixed wing, 2 = quadrotor, 13 = hexarotor
# see https://pixhawk.ethz.ch/mavlink/
#
param set MAV_TYPE 1
#
# Check if we got an IO
#
if px4io start
then
echo "IO started"
else
fmu mode_serial
echo "FMU started"
fi
#
# Start the sensors (depends on orb, px4io)
#
sh /etc/init.d/rc.sensors
#
# Load mixer and start controllers (depends on px4io)
#
mixer load /dev/pwm_output /etc/mixers/FMU_AET.mix
fw_pos_control_l1 start
fw_att_control start
echo "[HIL] setup done, running"
set HIL yes
set VEHICLE_TYPE fw
set MIXER FMU_AERT

1
ROMFS/px4fmu_common/init.d/1004_rc_fw_Rascal110.hil
Unescape View File

@ -43,4 +43,3 @@ set HIL yes @@ -43,4 +43,3 @@ set HIL yes
set VEHICLE_TYPE fw
set MIXER FMU_AERT

37
ROMFS/px4fmu_common/init.d/12001_octo_cox_pwm
Unescape View File

@ -0,0 +1,37 @@ @@ -0,0 +1,37 @@
#!nsh
#
# Generic 10” Octo coaxial geometry
#
# Maintainers: Lorenz Meier <lm@inf.ethz.ch>
#
if [ $DO_AUTOCONFIG == yes ]
then
#
# Default parameters for this platform
#
param set MC_ATT_P 7.0
param set MC_ATT_I 0.0
param set MC_ATT_D 0.0
param set MC_ATTRATE_P 0.12
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_D 0.004
param set MC_YAWPOS_P 2.0
param set MC_YAWPOS_I 0.0
param set MC_YAWPOS_D 0.0
param set MC_YAWRATE_P 0.3
param set MC_YAWRATE_I 0.2
param set MC_YAWRATE_D 0.005
# TODO add default MPC parameters
fi
set VEHICLE_TYPE mc
set MIXER FMU_octo_cox
set PWM_OUTPUTS 1234
set PWM_RATE 400
# DJI ESC range
set PWM_DISARMED 900
set PWM_MIN 1200
set PWM_MAX 1900

48
ROMFS/px4fmu_common/init.d/2101_hk_bixler
Unescape View File

@ -1,11 +1,11 @@ @@ -1,11 +1,11 @@
#!nsh
echo "[init] PX4FMU v1, v2 with or without IO on HK Bixler"
echo "[init] PX4FMU v1, v2 with or without IO on 3DR SkyWalker"
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
if [ $DO_AUTOCONFIG == yes ]
then
# Set all params here, then disable autoconfig
param set FW_P_D 0
@ -35,46 +35,6 @@ then @@ -35,46 +35,6 @@ then
param set SYS_AUTOCONFIG 0
param save
fi
#
# Force some key parameters to sane values
# MAV_TYPE 1 = fixed wing
#
param set MAV_TYPE 1
#
# Start and configure PX4IO or FMU interface
#
if px4io detect
then
# Start MAVLink (depends on orb)
mavlink start
sh /etc/init.d/rc.io
# Limit to 100 Hz updates and (implicit) 50 Hz PWM
px4io limit 100
else
# Start MAVLink (on UART1 / ttyS0)
mavlink start -d /dev/ttyS0
fmu mode_pwm
param set BAT_V_SCALING 0.004593
set EXIT_ON_END yes
fi
#
# Load mixer and start controllers (depends on px4io)
#
if [ -f /fs/microsd/etc/mixers/FMU_AERT.mix ]
then
echo "Using /fs/microsd/etc/mixers/FMU_AERT.mix"
mixer load /dev/pwm_output /fs/microsd/etc/mixers/FMU_AERT.mix
else
echo "Using /etc/mixers/FMU_Q.mix"
mixer load /dev/pwm_output /etc/mixers/FMU_AERT.mix
fi
#
# Start common fixedwing apps
#
sh /etc/init.d/rc.fixedwing
set VEHICLE_TYPE fw
set MIXER FMU_AERT

48
ROMFS/px4fmu_common/init.d/2102_3dr_skywalker
Unescape View File

@ -5,7 +5,7 @@ echo "[init] PX4FMU v1, v2 with or without IO on 3DR SkyWalker" @@ -5,7 +5,7 @@ echo "[init] PX4FMU v1, v2 with or without IO on 3DR SkyWalker"
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
if [ $DO_AUTOCONFIG == yes ]
then
# Set all params here, then disable autoconfig
param set FW_P_D 0
@ -35,48 +35,6 @@ then @@ -35,48 +35,6 @@ then
param set SYS_AUTOCONFIG 0
param save
fi
#
# Force some key parameters to sane values
# MAV_TYPE 1 = fixed wing
#
param set MAV_TYPE 1
#
# Start and configure PX4IO or FMU interface
#
if px4io detect
then
# Start MAVLink (depends on orb)
mavlink start
sh /etc/init.d/rc.io
# Limit to 100 Hz updates and (implicit) 50 Hz PWM
px4io limit 100
else
# Start MAVLink (on UART1 / ttyS0)
mavlink start -d /dev/ttyS0
fmu mode_pwm
param set BAT_V_SCALING 0.004593
set EXIT_ON_END yes
fi
pwm disarmed -c 3 -p 1056
#
# Load mixer and start controllers (depends on px4io)
#
if [ -f /fs/microsd/etc/mixers/FMU_AERT.mix ]
then
echo "Using /fs/microsd/etc/mixers/FMU_AERT.mix"
mixer load /dev/pwm_output /fs/microsd/etc/mixers/FMU_AETR.mix
else
echo "Using /etc/mixers/FMU_Q.mix"
mixer load /dev/pwm_output /etc/mixers/FMU_AETR.mix
fi
#
# Start common fixedwing apps
#
sh /etc/init.d/rc.fixedwing
set VEHICLE_TYPE fw
set MIXER FMU_AERT

84
ROMFS/px4fmu_common/init.d/3030_io_camflyer
Unescape View File

@ -2,57 +2,39 @@ @@ -2,57 +2,39 @@
echo "[init] PX4FMU v1, v2 with or without IO on Camflyer"
#
# Load default params for this platform
#
if param compare SYS_AUTOCONFIG 1
if [ $DO_AUTOCONFIG == yes ]
then
# Set all params here, then disable autoconfig
# TODO
param set SYS_AUTOCONFIG 0
param save
#
# Default parameters for this platform
#
param set FW_AIRSPD_MIN 7
param set FW_AIRSPD_TRIM 9
param set FW_AIRSPD_MAX 14
param set FW_L1_PERIOD 10
param set FW_P_D 0
param set FW_P_I 0
param set FW_P_IMAX 20
param set FW_P_LIM_MAX 30
param set FW_P_LIM_MIN -20
param set FW_P_P 30
param set FW_P_RMAX_NEG 0
param set FW_P_RMAX_POS 0
param set FW_P_ROLLFF 2
param set FW_R_D 0
param set FW_R_I 5
param set FW_R_IMAX 20
param set FW_R_P 60
param set FW_R_RMAX 60
param set FW_THR_CRUISE 0.65
param set FW_THR_MAX 0.7
param set FW_THR_MIN 0
param set FW_T_SINK_MAX 5
param set FW_T_SINK_MIN 2
param set FW_T_TIME_CONST 9
param set FW_Y_ROLLFF 2.0
param set RC_SCALE_ROLL 1.0
param set RC_SCALE_PITCH 1.0
fi
#
# Force some key parameters to sane values
# MAV_TYPE 1 = fixed wing
#
param set MAV_TYPE 1
#
# Start and configure PX4IO or FMU interface
#
if px4io detect
then
# Start MAVLink (depends on orb)
mavlink start
sh /etc/init.d/rc.io
# Limit to 100 Hz updates and (implicit) 50 Hz PWM
px4io limit 100
else
# Start MAVLink (on UART1 / ttyS0)
mavlink start -d /dev/ttyS0
fmu mode_pwm
param set BAT_V_SCALING 0.004593
set EXIT_ON_END yes
fi
#
# Load mixer and start controllers (depends on px4io)
#
if [ -f /fs/microsd/etc/mixers/FMU_Q.mix ]
then
echo "Using /fs/microsd/etc/mixers/FMU_Q.mix"
mixer load /dev/pwm_output /fs/microsd/etc/mixers/FMU_Q.mix
else
echo "Using /etc/mixers/FMU_Q.mix"
mixer load /dev/pwm_output /etc/mixers/FMU_Q.mix
fi
#
# Start common fixedwing apps
#
sh /etc/init.d/rc.fixedwing
set VEHICLE_TYPE fw
set MIXER FMU_Q

33
ROMFS/px4fmu_common/init.d/3032_skywalker_x5
Unescape View File

@ -7,8 +7,37 @@ @@ -7,8 +7,37 @@
if [ $DO_AUTOCONFIG == yes ]
then
# TODO
#
# Default parameters for this platform
#
param set FW_AIRSPD_MIN 7
param set FW_AIRSPD_TRIM 9
param set FW_AIRSPD_MAX 14
param set FW_L1_PERIOD 10
param set FW_P_D 0
param set FW_P_I 0
param set FW_P_IMAX 20
param set FW_P_LIM_MAX 30
param set FW_P_LIM_MIN -20
param set FW_P_P 30
param set FW_P_RMAX_NEG 0
param set FW_P_RMAX_POS 0
param set FW_P_ROLLFF 2
param set FW_R_D 0
param set FW_R_I 5
param set FW_R_IMAX 20
param set FW_R_P 60
param set FW_R_RMAX 60
param set FW_THR_CRUISE 0.65
param set FW_THR_MAX 0.7
param set FW_THR_MIN 0
param set FW_T_SINK_MAX 5
param set FW_T_SINK_MIN 2
param set FW_T_TIME_CONST 9
param set FW_Y_ROLLFF 2.0
param set RC_SCALE_ROLL 1.0
param set RC_SCALE_PITCH 1.0
fi
set VEHICLE_TYPE fw
set MIXER FMU_Q
set MIXER FMU_X5

37
ROMFS/px4fmu_common/init.d/5001_quad_+_pwm
Unescape View File

@ -0,0 +1,37 @@ @@ -0,0 +1,37 @@
#!nsh
#
# Generic 10” Quad + geometry
#
# Maintainers: Lorenz Meier <lm@inf.ethz.ch>
#
if [ $DO_AUTOCONFIG == yes ]
then
#
# Default parameters for this platform
#
param set MC_ATT_P 7.0
param set MC_ATT_I 0.0
param set MC_ATT_D 0.0
param set MC_ATTRATE_P 0.12
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_D 0.004
param set MC_YAWPOS_P 2.0
param set MC_YAWPOS_I 0.0
param set MC_YAWPOS_D 0.0
param set MC_YAWRATE_P 0.3
param set MC_YAWRATE_I 0.2
param set MC_YAWRATE_D 0.005
# TODO add default MPC parameters
fi
set VEHICLE_TYPE mc
set MIXER FMU_quad_+
set PWM_OUTPUTS 1234
set PWM_RATE 400
# DJI ESC range
set PWM_DISARMED 900
set PWM_MIN 1200
set PWM_MAX 1900

37
ROMFS/px4fmu_common/init.d/6001_hexa_x_pwm
Unescape View File

@ -0,0 +1,37 @@ @@ -0,0 +1,37 @@
#!nsh
#
# Generic 10” Hexa X geometry
#
# Maintainers: Lorenz Meier <lm@inf.ethz.ch>
#
if [ $DO_AUTOCONFIG == yes ]
then
#
# Default parameters for this platform
#
param set MC_ATT_P 7.0
param set MC_ATT_I 0.0
param set MC_ATT_D 0.0
param set MC_ATTRATE_P 0.12
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_D 0.004
param set MC_YAWPOS_P 2.0
param set MC_YAWPOS_I 0.0
param set MC_YAWPOS_D 0.0
param set MC_YAWRATE_P 0.3
param set MC_YAWRATE_I 0.2
param set MC_YAWRATE_D 0.005
# TODO add default MPC parameters
fi
set VEHICLE_TYPE mc
set MIXER FMU_hexa_x
set PWM_OUTPUTS 1234
set PWM_RATE 400
# DJI ESC range
set PWM_DISARMED 900
set PWM_MIN 1200
set PWM_MAX 1900

37
ROMFS/px4fmu_common/init.d/7001_hexa_+_pwm
Unescape View File

@ -0,0 +1,37 @@ @@ -0,0 +1,37 @@
#!nsh
#
# Generic 10” Hexa + geometry
#
# Maintainers: Lorenz Meier <lm@inf.ethz.ch>
#
if [ $DO_AUTOCONFIG == yes ]
then
#
# Default parameters for this platform
#
param set MC_ATT_P 7.0
param set MC_ATT_I 0.0
param set MC_ATT_D 0.0
param set MC_ATTRATE_P 0.12
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_D 0.004
param set MC_YAWPOS_P 2.0
param set MC_YAWPOS_I 0.0
param set MC_YAWPOS_D 0.0
param set MC_YAWRATE_P 0.3
param set MC_YAWRATE_I 0.2
param set MC_YAWRATE_D 0.005
# TODO add default MPC parameters
fi
set VEHICLE_TYPE mc
set MIXER FMU_hexa_+
set PWM_OUTPUTS 1234
set PWM_RATE 400
# DJI ESC range
set PWM_DISARMED 900
set PWM_MIN 1200
set PWM_MAX 1900

37
ROMFS/px4fmu_common/init.d/8001_octo_x_pwm
Unescape View File

@ -0,0 +1,37 @@ @@ -0,0 +1,37 @@
#!nsh
#
# Generic 10” Octo X geometry
#
# Maintainers: Lorenz Meier <lm@inf.ethz.ch>
#
if [ $DO_AUTOCONFIG == yes ]
then
#
# Default parameters for this platform
#
param set MC_ATT_P 7.0
param set MC_ATT_I 0.0
param set MC_ATT_D 0.0
param set MC_ATTRATE_P 0.12
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_D 0.004
param set MC_YAWPOS_P 2.0
param set MC_YAWPOS_I 0.0
param set MC_YAWPOS_D 0.0
param set MC_YAWRATE_P 0.3
param set MC_YAWRATE_I 0.2
param set MC_YAWRATE_D 0.005
# TODO add default MPC parameters
fi
set VEHICLE_TYPE mc
set MIXER FMU_octo_x
set PWM_OUTPUTS 1234
set PWM_RATE 400
# DJI ESC range
set PWM_DISARMED 900
set PWM_MIN 1200
set PWM_MAX 1900

37
ROMFS/px4fmu_common/init.d/9001_octo_+_pwm
Unescape View File

@ -0,0 +1,37 @@ @@ -0,0 +1,37 @@
#!nsh
#
# Generic 10” Octo + geometry
#
# Maintainers: Lorenz Meier <lm@inf.ethz.ch>
#
if [ $DO_AUTOCONFIG == yes ]
then
#
# Default parameters for this platform
#
param set MC_ATT_P 7.0
param set MC_ATT_I 0.0
param set MC_ATT_D 0.0
param set MC_ATTRATE_P 0.12
param set MC_ATTRATE_I 0.0
param set MC_ATTRATE_D 0.004
param set MC_YAWPOS_P 2.0
param set MC_YAWPOS_I 0.0
param set MC_YAWPOS_D 0.0
param set MC_YAWRATE_P 0.3
param set MC_YAWRATE_I 0.2
param set MC_YAWRATE_D 0.005
# TODO add default MPC parameters
fi
set VEHICLE_TYPE mc
set MIXER FMU_octo_+
set PWM_OUTPUTS 1234
set PWM_RATE 400
# DJI ESC range
set PWM_DISARMED 900
set PWM_MIN 1200
set PWM_MAX 1900

9
ROMFS/px4fmu_common/init.d/cmp_test
Unescape View File

@ -1,9 +0,0 @@ @@ -1,9 +0,0 @@
#!nsh
cp /etc/extras/px4io-v2_default.bin /fs/microsd/px4io.loaded
if cmp /etc/extras/px4io-v2_default.bin /fs/microsd/px4io.loaded
then
echo "CMP returned true"
else
echo "CMP returned false"
fi

94
ROMFS/px4fmu_common/init.d/rc.autostart
Unescape View File

@ -33,7 +33,7 @@ fi @@ -33,7 +33,7 @@ fi
if param compare SYS_AUTOSTART 1002
then
#sh /etc/init.d/1002_rc_fw_state.hil
sh /etc/init.d/1002_rc_fw_state.hil
fi
if param compare SYS_AUTOSTART 1003
@ -52,47 +52,47 @@ fi @@ -52,47 +52,47 @@ fi
if param compare SYS_AUTOSTART 2100 100
then
#sh /etc/init.d/2100_mpx_easystar
#set MODE custom
sh /etc/init.d/2100_mpx_easystar
set MODE custom
fi
if param compare SYS_AUTOSTART 2101 101
then
#sh /etc/init.d/2101_hk_bixler
#set MODE custom
sh /etc/init.d/2101_hk_bixler
set MODE custom
fi
if param compare SYS_AUTOSTART 2102 102
then
#sh /etc/init.d/2102_3dr_skywalker
#set MODE custom
sh /etc/init.d/2102_3dr_skywalker
set MODE custom
fi
#
# Flying wing
#
if param compare SYS_AUTOSTART 3030
if param compare SYS_AUTOSTART 3030 30
then
#sh /etc/init.d/3030_io_camflyer
sh /etc/init.d/3030_io_camflyer
fi
if param compare SYS_AUTOSTART 3031
if param compare SYS_AUTOSTART 3031 31
then
sh /etc/init.d/3031_phantom
fi
if param compare SYS_AUTOSTART 3032
if param compare SYS_AUTOSTART 3032 32
then
sh /etc/init.d/3032_skywalker_x5
fi
if param compare SYS_AUTOSTART 3033
if param compare SYS_AUTOSTART 3033 33
then
sh /etc/init.d/3033_wingwing
fi
if param compare SYS_AUTOSTART 3034
if param compare SYS_AUTOSTART 3034 34
then
sh /etc/init.d/3034_fx79
fi
@ -101,41 +101,95 @@ fi @@ -101,41 +101,95 @@ fi
# Quad X
#
if param compare SYS_AUTOSTART 4008
if param compare SYS_AUTOSTART 4008 8
then
#sh /etc/init.d/4008_ardrone
fi
if param compare SYS_AUTOSTART 4009
if param compare SYS_AUTOSTART 4009 9
then
#sh /etc/init.d/4009_ardrone_flow
fi
if param compare SYS_AUTOSTART 4010
if param compare SYS_AUTOSTART 4010 10
then
sh /etc/init.d/4010_dji_f330
fi
if param compare SYS_AUTOSTART 4011
if param compare SYS_AUTOSTART 4011 11
then
sh /etc/init.d/4011_dji_f450
fi
if param compare SYS_AUTOSTART 4012
if param compare SYS_AUTOSTART 4012 12
then
sh /etc/init.d/4012_hk_x550
fi
#
# Quad +
#
if param compare SYS_AUTOSTART 5001
then
sh /etc/init.d/5001_quad_+_pwm
fi
#
# Hexa X
#
if param compare SYS_AUTOSTART 6001
then
sh /etc/init.d/6001_hexa_x_pwm
fi
#
# Hexa +
#
if param compare SYS_AUTOSTART 7001
then
sh /etc/init.d/7001_hexa_+_pwm
fi
#
# Octo X
#
if param compare SYS_AUTOSTART 8001
then
sh /etc/init.d/8001_octo_x_pwm
fi
#
# Octo +
#
if param compare SYS_AUTOSTART 9001
then
sh /etc/init.d/9001_octo_+_pwm
fi
#
# Wide arm / H frame
#
if param compare SYS_AUTOSTART 10015
if param compare SYS_AUTOSTART 10015 15
then
sh /etc/init.d/10015_tbs_discovery
fi
if param compare SYS_AUTOSTART 10016
if param compare SYS_AUTOSTART 10016 16
then
sh /etc/init.d/10016_3dr_iris
fi
#
# Octo Coaxial
#
if param compare SYS_AUTOSTART 12001
then
sh /etc/init.d/12001_octo_cox_pwm
fi

Write Preview
Loading…
Cancel
Save