sdp3x: add '-k' option to keep retrying even if probing fails

we have a setup where the sensor is connected via magnets, so the system
could boot without sensor initially attached.

src/drivers/differential_pressure/sdp3x/SDP3X.cpp

@@ -40,10 +40,19 @@
 
 #include "SDP3X.hpp"
 
+using namespace time_literals;
+
 int
 SDP3X::probe()
 {
-	return !init_sdp3x();
+	_require_initialization = !init_sdp3x();
+
+	if (_require_initialization && _keep_retrying) {
+		PX4_INFO("no sensor found, but will keep retrying");
+		return 0;
+	}
+
+	return _require_initialization ? -1 : 0;
 }
 
 int SDP3X::write_command(uint16_t command)
@@ -57,14 +66,12 @@ int SDP3X::write_command(uint16_t command)
 bool
 SDP3X::init_sdp3x()
 {
-	int ret;
-
 	if (get_device_address() == I2C_ADDRESS_1_SDP3X) { // since we are broadcasting, only do it for the first device address
-		// step 1 - reset on broadcast
+		// reset on broadcast
 		uint16_t prev_addr = get_device_address();
 		set_device_address(SDP3X_RESET_ADDR);
 		uint8_t reset_cmd = SDP3X_RESET_CMD;
-		ret = transfer(&reset_cmd, 1, nullptr, 0);
+		int ret = transfer(&reset_cmd, 1, nullptr, 0);
 		set_device_address(prev_addr);
 
 		if (ret != PX4_OK) {
@@ -76,31 +83,36 @@ SDP3X::init_sdp3x()
 		px4_usleep(20000);
 	}
 
-	// step 2 - configure
-	ret = write_command(SDP3X_CONT_MEAS_AVG_MODE);
+	return configure() == 0;
+}
+
+int
+SDP3X::configure()
+{
+	int ret = write_command(SDP3X_CONT_MEAS_AVG_MODE);
 
 	if (ret != PX4_OK) {
 		perf_count(_comms_errors);
 		DEVICE_DEBUG("config failed");
-		return false;
+		return ret;
 	}
 
 	px4_usleep(10000);
 
-	// step 3 - get scale
+	// get scale
 	uint8_t val[9];
 	ret = transfer(nullptr, 0, &val[0], sizeof(val));
 
 	if (ret != PX4_OK) {
 		perf_count(_comms_errors);
 		PX4_ERR("get scale failed");
-		return false;
+		return ret;
 	}
 
 	// Check the CRC
 	if (!crc(&val[0], 2, val[2]) || !crc(&val[3], 2, val[5]) || !crc(&val[6], 2, val[8])) {
 		perf_count(_comms_errors);
-		return false;
+		return PX4_ERROR;
 	}
 
 	_scale = (((uint16_t)val[6]) << 8) | val[7];
@@ -119,7 +131,7 @@ SDP3X::init_sdp3x()
 		break;
 	}
 
-	return true;
+	return PX4_OK;
 }
 
 int
@@ -173,10 +185,18 @@ SDP3X::collect()
 void
 SDP3X::RunImpl()
 {
-	int ret = PX4_ERROR;
+	if (_require_initialization) {
+		if (configure() == PX4_OK) {
+			_require_initialization = false;
+
+		} else {
+			// periodically retry to configure
+			ScheduleDelayed(300_ms);
+			return;
+		}
+	}
 
-	// measurement phase
-	ret = collect();
+	int ret = collect();
 
 	uint32_t delay_us = CONVERSION_INTERVAL;
 

src/drivers/differential_pressure/sdp3x/SDP3X.hpp

@@ -69,9 +69,11 @@
 class SDP3X : public Airspeed, public I2CSPIDriver<SDP3X>
 {
 public:
-	SDP3X(I2CSPIBusOption bus_option, const int bus, int bus_frequency, int address = I2C_ADDRESS_1_SDP3X) :
+	SDP3X(I2CSPIBusOption bus_option, const int bus, int bus_frequency, int address = I2C_ADDRESS_1_SDP3X,
+	      bool keep_retrying = false) :
 		Airspeed(bus, bus_frequency, address, CONVERSION_INTERVAL),
-		I2CSPIDriver(MODULE_NAME, px4::device_bus_to_wq(get_device_id()), bus_option, bus, address)
+		I2CSPIDriver(MODULE_NAME, px4::device_bus_to_wq(get_device_id()), bus_option, bus, address),
+		_keep_retrying{keep_retrying}
 	{
 	}
 
@@ -88,6 +90,7 @@ private:
 	int	measure() override { return 0; }
 	int	collect() override;
 	int	probe() override;
+	int	configure();
 
 	math::LowPassFilter2p _filter{SPD3X_MEAS_RATE, SDP3X_MEAS_DRIVER_FILTER_FREQ};
 
@@ -104,4 +107,6 @@ private:
 	int write_command(uint16_t command);
 
 	uint16_t _scale{0};
+	const bool _keep_retrying;
+	bool _require_initialization{true};
 };

src/drivers/differential_pressure/sdp3x/SDP3X_main.cpp

@@ -38,7 +38,8 @@ extern "C" __EXPORT int sdp3x_airspeed_main(int argc, char *argv[]);
 I2CSPIDriverBase *SDP3X::instantiate(const BusCLIArguments &cli, const BusInstanceIterator &iterator,
 				     int runtime_instance)
 {
-	SDP3X *instance = new SDP3X(iterator.configuredBusOption(), iterator.bus(), cli.bus_frequency, cli.i2c_address);
+	SDP3X *instance = new SDP3X(iterator.configuredBusOption(), iterator.bus(), cli.bus_frequency, cli.i2c_address,
+				    cli.custom1 == 1);
 
 	if (instance == nullptr) {
 		PX4_ERR("alloc failed");
@@ -63,18 +64,28 @@ SDP3X::print_usage()
 	PRINT_MODULE_USAGE_COMMAND("start");
 	PRINT_MODULE_USAGE_PARAMS_I2C_SPI_DRIVER(true, false);
 	PRINT_MODULE_USAGE_PARAMS_I2C_ADDRESS(0x21);
+	PRINT_MODULE_USAGE_PARAM_FLAG('k', "if initialization (probing) fails, keep retrying periodically", true);
 	PRINT_MODULE_USAGE_DEFAULT_COMMANDS();
 }
 
 int
 sdp3x_airspeed_main(int argc, char *argv[])
 {
+	int ch;
 	using ThisDriver = SDP3X;
 	BusCLIArguments cli{true, false};
 	cli.default_i2c_frequency = 100000;
 	cli.i2c_address = I2C_ADDRESS_1_SDP3X;
 
-	const char *verb = cli.parseDefaultArguments(argc, argv);
+	while ((ch = cli.getopt(argc, argv, "k")) != EOF) {
+		switch (ch) {
+		case 'k': // keep retrying
+			cli.custom1 = 1;
+			break;
+		}
+	}
+
+	const char *verb = cli.optarg();
 
 	if (!verb) {
 		ThisDriver::print_usage();