Add gyro and accel range register values to the icm42688p driver.

src/drivers/imu/invensense/icm42688p/ICM42688P.hpp

@@ -178,8 +178,8 @@ private:
 		{ Register::BANK_0::INT_CONFIG,           INT_CONFIG_BIT::INT1_MODE | INT_CONFIG_BIT::INT1_DRIVE_CIRCUIT, INT_CONFIG_BIT::INT1_POLARITY },
 		{ Register::BANK_0::FIFO_CONFIG,          FIFO_CONFIG_BIT::FIFO_MODE_STOP_ON_FULL, 0 },
 		{ Register::BANK_0::PWR_MGMT0,            PWR_MGMT0_BIT::GYRO_MODE_LOW_NOISE | PWR_MGMT0_BIT::ACCEL_MODE_LOW_NOISE, 0 },
-		{ Register::BANK_0::GYRO_CONFIG0,         GYRO_CONFIG0_BIT::GYRO_ODR_8KHZ_SET, GYRO_CONFIG0_BIT::GYRO_ODR_8KHZ_CLEAR },
-		{ Register::BANK_0::ACCEL_CONFIG0,        ACCEL_CONFIG0_BIT::ACCEL_ODR_8KHZ_SET, ACCEL_CONFIG0_BIT::ACCEL_ODR_8KHZ_CLEAR },
+		{ Register::BANK_0::GYRO_CONFIG0,         GYRO_CONFIG0_BIT::GYRO_FS_SEL_2000_DPS | GYRO_CONFIG0_BIT::GYRO_ODR_8KHZ_SET, GYRO_CONFIG0_BIT::GYRO_ODR_8KHZ_CLEAR },
+		{ Register::BANK_0::ACCEL_CONFIG0,        ACCEL_CONFIG0_BIT::ACCEL_FS_SEL_16G | ACCEL_CONFIG0_BIT::ACCEL_ODR_8KHZ_SET, ACCEL_CONFIG0_BIT::ACCEL_ODR_8KHZ_CLEAR },
 		{ Register::BANK_0::GYRO_CONFIG1,         0, GYRO_CONFIG1_BIT::GYRO_UI_FILT_ORD },
 		{ Register::BANK_0::GYRO_ACCEL_CONFIG0,   0, GYRO_ACCEL_CONFIG0_BIT::ACCEL_UI_FILT_BW | GYRO_ACCEL_CONFIG0_BIT::GYRO_UI_FILT_BW },
 		{ Register::BANK_0::ACCEL_CONFIG1,        0, ACCEL_CONFIG1_BIT::ACCEL_UI_FILT_ORD },

src/drivers/imu/invensense/icm42688p/InvenSense_ICM42688P_registers.hpp

@@ -160,6 +160,11 @@ enum PWR_MGMT0_BIT : uint8_t {
 enum GYRO_CONFIG0_BIT : uint8_t {
 	// 7:5 GYRO_FS_SEL
 	GYRO_FS_SEL_2000_DPS = 0, // 0b000 = ±2000dps (default)
+	GYRO_FS_SEL_1000_DPS = Bit5,
+	GYRO_FS_SEL_500_DPS  = Bit6,
+	GYRO_FS_SEL_250_DPS  = Bit6 | Bit5,
+	GYRO_FS_SEL_125_DPS  = Bit7,
+
 
 	// 3:0 GYRO_ODR
 	//  0001: 32kHz
@@ -180,6 +185,10 @@ enum GYRO_CONFIG0_BIT : uint8_t {
 enum ACCEL_CONFIG0_BIT : uint8_t {
 	// 7:5 ACCEL_FS_SEL
 	ACCEL_FS_SEL_16G = 0, // 000: ±16g (default)
+	ACCEL_FS_SEL_8G  = Bit5,
+	ACCEL_FS_SEL_4G  = Bit6,
+	ACCEL_FS_SEL_2G  = Bit6 | Bit5,
+
 
 	// 3:0 ACCEL_ODR
 	//  0001: 32kHz