px4_autopilot

Commit Graph

Author	SHA1	Message	Date
Julian Oes	490a0c473b	Rename vmount to gimbal	3 years ago
Daniel Agar	d077ca15fb	delete PWM_SERVO_SET, PWM_SERVO_SET_MODE, systemcmds/motor_ramp, and pwm_out test	3 years ago
Daniel Agar	df44df2df6	delete systemcmds/esc_calib - this is redundant with commander esc_calibration	3 years ago
Daniel Agar	daa925137c	boards: move default battery calibration defines to parameter defaults	3 years ago
Daniel Agar	e835a7c4ea	boards: enable readline history and tab completion on newer boards	3 years ago
Daniel Agar	8185e2a384	boards: board_app_initialize() don't return early on failure - depending on the situation we're more likely to get actionable user feedback by allowing boot to complete rather than silently failing	3 years ago
Daniel Agar	a2064cceff	boards: enable early MPU reset on any board potentially not using the PX4 bootloader	3 years ago
David Sidrane	5b30d1cd41	av_x-v1:Set CONFIG_MKFATFS_BUFFER_ALIGMENT=32	3 years ago
Beat Küng	4c03def6e9	boards: add CONTROL_ALLOCATOR + ACTUATOR_TEST	3 years ago
Daniel Agar	f5d9b01f5c	NuttX build in place - cmake NuttX build wrapper compile in place instead of copying source tree to build directory - slightly faster skipping necessary copying (depending on system) - allows debugging in place - easier to work directly in NuttX following official documentation - simplifies overall build which should make it easier to resolve any remaining NuttX dependency issues in the build system - the downside is switching back and forth between different builds always require rebuilding NuttX, but I think this is worth the improved developer experience - also no longer builds px4io and bootloader in every single build, for most users these rarely change and we're wasting a lot of build time	3 years ago
Daniel Agar	2d816e0b3e	[WIP] manual_control selector hacks	3 years ago
Peter van der Perk	c6f249f7f1	Kconfig merge_config only set to 'n' when BOOL Run make updateconfig to fix delta's of derived configs	3 years ago
bresch	6ec9ab11f2	add fw auto-tune module to board configs	3 years ago
Peter van der Perk	ed5fee1a72	Backport #18311 mc atune	3 years ago
Peter van der Perk	454c907b7d	Kconfig backport #18327 mag_bias	3 years ago
Peter van der Perk	36191e649a	Kconfig backport #18289 and other flash size fixes	3 years ago
Peter van der Perk	33fd65e5fe	[Kconfig] Fix regressions found by bloaty and cleanup unused cmake	3 years ago
Peter van der Perk	b3e799e277	[Kconfig] Add all distance sensors	3 years ago
Peter van der Perk	21e6547ac7	[Kconfig] Toolchain & platform fixes, SITL still broken	3 years ago
Peter van der Perk	6af0477733	[Kconfig] Gnerate px4board from old cmake Added make updateconfig to update all config when default's have changed Added cmake to px4board conversion script	3 years ago
Daniel Agar	bbfaa4694c	boards: cleanup serial RX DMA hrt_call_every - remove ts_to_abstime dependency	3 years ago
Daniel Agar	c271a9e3e6	add sd_stress to all boards and run on test rack	3 years ago
bresch	1443f773da	mbe: add module to targets	3 years ago
bresch	5874b1f87c	mc atune: add module to all targets - adjust flash constrianed targets to fit	3 years ago
Beat Küng	c5c80e31b6	boards: remove DIRECT_INPUT_TIMER_CHANNELS from board_config.h	3 years ago
Beat Küng	a8e75d174c	boards: remove BOARD_HAS_PWM and use DIRECT_PWM_OUTPUT_CHANNELS	3 years ago
David Sidrane	bb913ae11a	system_load:Track Dynamic PID hash	4 years ago
David Sidrane	53477a1f82	av_x-v1: Update nsh defconfig NuttX 10.1.0+ CONFIG_NET_SOCKOPTS Automatic	4 years ago
David Sidrane	24a263a6bc	av_x-v1: Update nsh defconfig NuttX 10.1.0+	4 years ago
Beat Küng	0e1f3a2d62	px4_add_board: infer VENDOR, MODEL & LABEL from cmake file name	4 years ago
David Sidrane	05bdef867d	Track NuttX syslog change	4 years ago
echoG	6bc09138c1	Adding BatMon smart battery as a module and refactoring SMBUS based SBS 1.1 spec to a library	4 years ago
Daniel Agar	5f775b508f	boards: enable CONFIG_OTG_ID_GPIO_DISABLE on all F7/H7	4 years ago
David Sidrane	32e92ba817	Revert:Pull downs - bad levels cause motor spins	4 years ago
Daniel Agar	c3884b5bc1	fake_imu (formally fake_gyro) updates for testing gyro filtering - fake_imu now publishes sine sweeps over 10 seconds - accel is also published so that fake IMU can be selected when the only option	4 years ago
David Sidrane	d6a54910b4	av_x-v1: Initalize PWM as input with Pull Downs	4 years ago
Daniel Agar	58b40fbbb9	boards: move testing to dedicated test variants	4 years ago
Daniel Agar	ad934b4911	icm20948 i2c passthrough driver for ak09916 magnetometer (Here+ GPS/compass) - include icm20948 on most boards by default - create more test variants for default boards near flash limit (cuav_nora_test, cuav_x7pro_test, holybro_durandal-v1_test)	4 years ago
Daniel Agar	6874e9fba0	boards: NuttX disable all NSH memory debug commands (mb, mh, mw) by default - closes https://github.com/PX4/PX4-Autopilot/issues/17062	4 years ago
Daniel Agar	631d1647d3	boards: minimize unnecessary differences in default variants	4 years ago
Daniel Agar	2257c3767e	simple gyro auto calibration module	4 years ago
Daniel Agar	f8eaa6e46b	ROMFS handle bl_update generically - include all available legacy bootloaders	4 years ago
Daniel Agar	4d288512b5	add board architecture specific init defaults	4 years ago
Daniel Agar	19de1e57e3	gyro_fft promote to modules and include on all boards	4 years ago
garfieldG	3cd9b3c2cf	Added support in Mavlink Ethernet channel parameters Mavlink Ethernet channel settings such as udp port, remote port and broadcast mode now can be changed dynamically via parameters.	4 years ago
Beat Küng	7e33d03470	drivers: remove tap_esc - it's not used anymore - it would need a refactoring to use mixer_module	4 years ago
Daniel Agar	414f9f81d9	move fake GPS to standalone module	4 years ago
Daniel Agar	ab0d0fd0be	uORB move to PX4 platform layer	4 years ago
Daniel Agar	fb2a199621	delete unmaintaned mkblctrl driver	4 years ago
Daniel Agar	a257120e8d	boards: use new param default mechanism	4 years ago

1 2 3 4

182 Commits (master)