Branch: master

main

master

my1.12

my1.12-iic

pr-sensor-distance

release/1.12

sbg

tf-1.12

tf-1.12-print_test

tf-iic2uart

tf_driver-1.12

tf_i2c-1.12

tf_i2c_collis_pre

v1.13.0-BW

Branches Tags

${ item.name }

Create tag ${ searchTerm }

Create branch ${ searchTerm }

from 'master'

${ noResults }

Commit Graph

260 Commits (master)

Author	SHA1	Message	Date
Daniel Agar	6874e9fba0	boards: NuttX disable all NSH memory debug commands (mb, mh, mw) by default ... - closes https://github.com/PX4/PX4-Autopilot/issues/17062	4 years ago
Daniel Agar	631d1647d3	boards: minimize unnecessary differences in default variants	4 years ago
Daniel Agar	e58af90bac	boards: holybro can-gps-v1 create separate default and debug variants	4 years ago
Daniel Agar	e77bffe582	boards: STM32H7 remove CONFIG_MM_REGIONS=3	4 years ago
David Sidrane	4eabee00d6	holybro durandal-v1:Properly configure BDMA	4 years ago
David Sidrane	3581099c09	Revert "boards: disable BDMA on STM32H7 for now" ... This reverts commit f0d1f1d679.	4 years ago
David Sidrane	216959e221	holybro durandal-v1:Enable ADC3 in support of temperature sensing	4 years ago
Daniel Agar	00016e53fa	boards: holybro/kakutef7 disable CONSTRAINED_FLASH to increase optimization	4 years ago
Daniel Agar	4b99bd2077	boards: remove optional external ADIS IMUs to save flash	4 years ago
Daniel Agar	2257c3767e	simple gyro auto calibration module	4 years ago
Daniel Agar	f8eaa6e46b	ROMFS handle bl_update generically ... - include all available legacy bootloaders	4 years ago
Daniel Agar	4d288512b5	add board architecture specific init defaults	4 years ago
Daniel Agar	a0b9b44ff6	boards: stm32h7 set CONFIG_SDMMC1 consistently	4 years ago
David Sidrane	c2a5b5ed88	holybro_durandal-v1:Use Auto LSE Drive setting	4 years ago
Daniel Agar	19de1e57e3	gyro_fft promote to modules and include on all boards	4 years ago
Beat Küng	7e33d03470	drivers: remove tap_esc ... - it's not used anymore - it would need a refactoring to use mixer_module	4 years ago
David Sidrane	fd0494555c	canbootloader:stm32_boarddeinitialize->board_deinitialize	4 years ago
David Sidrane	dd736f8540	holybro_can-gps-v1:Ensure yeild is used for FLASH programing	4 years ago
Daniel Agar	11ad41f7cb	delete old imu/mpu6000 driver	4 years ago
Daniel Agar	cd7713eba2	boards: delete unused variants	4 years ago
Daniel Agar	414f9f81d9	move fake GPS to standalone module	4 years ago
David Sidrane	174f2624df	holybro_can-gps-v1:board_id uses as Uavcan HW version	4 years ago
David Sidrane	070db73e91	holybro_can-gps-v1:Use common uavcan board identity	4 years ago
Daniel Agar	ab0d0fd0be	uORB move to PX4 platform layer	4 years ago
Daniel Agar	44df0fb7a2	Analog Devices ADIS16448 rewrite ... - new IMU driver structure with state machine (no sleeps in bus thread) - verify all configured registers and trigger reset on failure - detect if DIO1 or DIO2 are actually connected for data ready interrupt usage - don't use CRC-16 on burst transfers except for verified lots	4 years ago
Daniel Agar	fb2a199621	delete unmaintaned mkblctrl driver	4 years ago
Daniel Agar	a257120e8d	boards: use new param default mechanism	4 years ago
Daniel Agar	8f0918a16b	boards: remove unused linker __param section	4 years ago
Daniel Agar	d67a84d941	boards: holybro can-gps-v1 fix bosch bmm150 path	4 years ago
David Sidrane	8167023dfb	holybro_can-gps-v1: Reorder Sensor Startup for reliabiltiy	4 years ago
David Sidrane	9e834d26f8	holybro_can-gps-v1:Add Flash Based Parameters	4 years ago
David Sidrane	7b3ce832d6	holybro_can-gps-v1: Add UAVCAN CAN2 Support	4 years ago
David Sidrane	fe732930d2	holybro_can-gps-v1:Fix ver HW NAME	4 years ago
David Sidrane	caba734d26	PR review AIs	4 years ago
David Sidrane	41c9f085ef	holybro_can-gps-v1:Temparary LED support	4 years ago
David Sidrane	0554755ed2	holybro_can-gps-v1:Added Support for holybro can gps	4 years ago
Daniel Agar	a2442ffb48	board: enable UAVCAN sensors by default on F7/H7	4 years ago
Daniel Agar	318c7e83b3	support up to PWM 14 ... - generate PWM_MAIN 1-14 - generate PWM_AUX 1-8 - generate PWM_EXTRA 1-8 - px4io and pwm_out directly read configuration parameters - only available and active physical outputs are actually shown for configuration - overall saves flash despite adding many new parameters	4 years ago
Daniel Agar	f0d1f1d679	boards: disable BDMA on STM32H7 for now	4 years ago
Daniel Agar	1ec10bfcc6	boards: disable CONFIG_ARMV7M_LAZYFPU again (#16573) ... - this was causing hard faults on the CUAV Nora and possibly other boards, disabling everywhere until we fully understand the root cause	4 years ago
Daniel Agar	cb74cb8692	boards: enable CONFIG_ARMV7M_LAZYFPU everywhere	4 years ago
Daniel Agar	763c3b8fda	boards: start enabling multi-EKF by default on F7/H7	4 years ago
Matthias Grob	7545249215	Add flight_mode_manager to all targets with mc_pos_control	4 years ago
David Sidrane	22bc176885	Added mft for queries	4 years ago
David Sidrane	a2a8d2fcf2	holybro_pix32v5: Use px4_platform_configure	4 years ago
David Sidrane	2b69fad3ac	holybro_kakutef7: Use px4_platform_configure	4 years ago
David Sidrane	79744ec156	holybro_durandal-v1: Use px4_platform_configure	4 years ago
斯东Stone	5f0ecc893e	boards: holybro/durandal add TELEM3 (/dev/ttyS4)	4 years ago
Daniel Agar	c60743b306	boards: NuttX increase file name max 32 -> 40	4 years ago
Daniel Agar	6b9dde59d6	update ecl to latest ... - fmu-v5 debug and stackcheck builds now need to be CONSTRAINED_FLASH to fit - delete unused holybro_durandal-v1_stackcheck build (also CONSTRAINED_FLASH)	4 years ago