Using cmake_host_system_information, grabs AVAILABLE_PHYSICAL_MEMORY and adds another job for every 1.5GB of available memory.
This is tested on a single system with 16 logical cores and 16GB RAM (~11.5GB available, reported correctly by cmake).
Using mixers on the IO side had a remote benefit of being able to
override all control surfaces with a radio remote on a fixed wing.
This ended up not being used that much and since the original design
10 years ago (2011) we have been able to convince ourselves that the
overall system stability is at a level where this marginal benefit,
which is not present on multicopters, is not worth the hazzle.
Co-authored-by: Beat Küng <beat-kueng@gmx.net>
Co-authored-by: Daniel Agar <daniel@agar.ca>
This commit adds SITL support for ignition gazebo. Ignition gazebo is a replacement for the "classic" gazebo for future applications.
The simulation can be run as the following
```
make px4_sitl ignition
```
- control allocation module with multirotor, VTOL standard, and tiltrotor support
- angular_velocity_controller
- See https://github.com/PX4/PX4-Autopilot/pull/13351 for details
Co-authored-by: Silvan Fuhrer <silvan@auterion.com>
Co-authored-by: Roman Bapst <bapstroman@gmail.com>
* Add techpod SITL target
This adds a SITL target forthe techpod fixedwing model
* Update sitl_gazebo submoudle
This submodule update includes the techpod UAV model
* Add jsbsim bridge to enable jsbsim for px4 SITL/HIL on jsbsim
This is a PX4 HIL/SITL integration into JSBSim. JSBSim is an open source flight dynamics model (http://jsbsim.sourceforge.net/)
Currently there are three models available which is the rascal, quadrotor_x, hexarotor_x integrated into the bridge.
The simulation can be run with the firmware with the following command for example
```
make px4_sitl jsbsim_rascal
```
The visualization is done flightgear and is done by the bridge sending UDP packets to flightgear. To disable the visualization `HEADLESS=1` when running the make command.
The simulation can be configured through the configuration files under the `config` directory through a xml file. Senor configurations, The xml file name should match the name of the model.
* Update Tools/sitl_run.sh
Co-authored-by: Beat Küng <beat-kueng@gmx.net>
Co-authored-by: Beat Küng <beat-kueng@gmx.net>
- fix gazebo SITL debug
- now prompts you to select vehicle
- devcontainer.json container support https://code.visualstudio.com/docs/remote/containers
- this allows you to jump straight into working within a container (px4-dev-nuttx) on a fresh machine
- also helps with Codespaces https://github.com/features/codespaces
- plugin updates
- cpp extension pack, spell checking, CTest support
- cleanup intellisense
- the backup tag parser was a resource hog and didn't work very well
- fix problemMatcher support so that you can click on a build failure
- new intrusive linked list container (c++ template) that sorts on insertion
- primarily for convenience inspecting things in the system like uORB or WorkQueues
- uorb status or top sorted alphabetically
- work_queue status threads sorted by priority, then items sorted alphabetically within each
- always check with state machine before reboot/shutdown
- respect BOARD_HAS_POWER_CONTROL (shutdown from command, low battery, power button)
- px4_shutdown_request add optional delay and always execute from HPWORK
- px4_shutdown_request split out px4_reboot_request
This adds a sitl target and aiframe configs for the r1_rover, which is a differential rover example for SITL rover. The model is based on the aion robotics r1 rover
Jukka Laitinen
Julian Oes
Guilherme Lawless
Jaeyoung-Lim
bresch
Daniel Agar
JaeyoungLim
TSC21
Dongoo Lee
David Jablonski
Benjamin Perseghetti
Julien Lecoeur
SalimTerryLi
Thies Lennart Alff
Beat Küng
Daniel Leonard Robinson
kritz
Jakub Kákona
JaeyoungLim
Lorenz Meier