8f0918a16b
boards: remove unused linker __param section
4 years ago
1ec10bfcc6
boards: disable CONFIG_ARMV7M_LAZYFPU again ( #16573 )
...
- this was causing hard faults on the CUAV Nora and possibly other boards, disabling everywhere until we fully understand the root cause
4 years ago
cb74cb8692
boards: enable CONFIG_ARMV7M_LAZYFPU everywhere
4 years ago
c60743b306
boards: NuttX increase file name max 32 -> 40
4 years ago
233949a377
NuttX upgrade to 10.0.0+ defconfig changes
4 years ago
2728af4264
boards: cubeorange and cubeyellow disable serial console (used for ADSB on new carrier boards)
...
- add console builds (cubepilot_cubeorange_console) for hardware test rack and developers
4 years ago
fc5caf382c
cubepilot_cubeyellow: Updates for NuttX 9.1.0+ External schedule_note
4 years ago
f9adf861dc
spracing_h7extreme Updates for NuttX 9.1.0-
4 years ago
e8e463b875
cubepilot_cubeyellow Updates for NuttX 9.1.0-
...
cubepilot_cubeyellow: defconfig MMCSD enable multiblock
4 years ago
2c3441aa90
boards: reduce CONFIG_NFILE_DESCRIPTORS 15 -> 12
...
- reduced now that calibration uses uORB::Subscription
- can likely be reduced further (perhaps < 8) with additional testing
5 years ago
65ab7cef2e
boards: cubepilot/cubeyellow small fixes and improvements
...
- fix UART config (GPS1, etc)
- TELEM2 enable TX DMA
- init simplify (sync with CubeOrange)
- amber LED use for armed state
- manually start ak09916 (Here2) on I2C2 with proper rotation
5 years ago
cfbf69f2a7
boards: rename Hex -> CubePilot
...
- hex_cube-orange_default -> cubepilot_cubeorange_default
- hex_cube-yellow_default -> cubepilot_cubeyellow_default
5 years ago
Daniel Agar
David Sidrane