px4_autopilot

Commit Graph

Author	SHA1	Message	Date
Daniel Agar	f8eaa6e46b	ROMFS handle bl_update generically - include all available legacy bootloaders	4 years ago
Daniel Agar	4d288512b5	add board architecture specific init defaults	4 years ago
Daniel Agar	19de1e57e3	gyro_fft promote to modules and include on all boards	4 years ago
Daniel Agar	c9a2d0ed34	IMU_GYRO_RATEMAX set system default to 400 Hz - MC default is still 800 Hz	4 years ago
Beat Küng	7e33d03470	drivers: remove tap_esc - it's not used anymore - it would need a refactoring to use mixer_module	4 years ago
Daniel Agar	11ad41f7cb	delete old imu/mpu6000 driver	4 years ago
Daniel Agar	cd7713eba2	boards: delete unused variants	4 years ago
Daniel Agar	414f9f81d9	move fake GPS to standalone module	4 years ago
Julian Oes	20bc924668	boards: disable vmount for fmu-v2	4 years ago
Daniel Agar	ab0d0fd0be	uORB move to PX4 platform layer	4 years ago
Daniel Agar	44df0fb7a2	Analog Devices ADIS16448 rewrite - new IMU driver structure with state machine (no sleeps in bus thread) - verify all configured registers and trigger reset on failure - detect if DIO1 or DIO2 are actually connected for data ready interrupt usage - don't use CRC-16 on burst transfers except for verified lots	4 years ago
Daniel Agar	fb2a199621	delete unmaintaned mkblctrl driver	4 years ago
Daniel Agar	a257120e8d	boards: use new param default mechanism	4 years ago
Daniel Agar	8f0918a16b	boards: remove unused linker __param section	4 years ago
David Sidrane	3b25790b06	px4_fmu-v2:Make room	4 years ago
Daniel Agar	78dff6adcb	boards: add CONSTRAINED_MEMORY build option - currently the main change is that it reduces the max number of ORB multi instances to 4, but usage will be expanded as needed - limits number of EKF2 multi instances to 2. - enabled on all cortex m4 boards	4 years ago
Daniel Agar	318c7e83b3	support up to PWM 14 - generate PWM_MAIN 1-14 - generate PWM_AUX 1-8 - generate PWM_EXTRA 1-8 - px4io and pwm_out directly read configuration parameters - only available and active physical outputs are actually shown for configuration - overall saves flash despite adding many new parameters	4 years ago
Daniel Agar	1ec10bfcc6	boards: disable CONFIG_ARMV7M_LAZYFPU again (#16573 ) - this was causing hard faults on the CUAV Nora and possibly other boards, disabling everywhere until we fully understand the root cause	4 years ago
Daniel Agar	cb74cb8692	boards: enable CONFIG_ARMV7M_LAZYFPU everywhere	4 years ago
Matthias Grob	7545249215	Add flight_mode_manager to all targets with mc_pos_control	4 years ago
David Sidrane	22bc176885	Added mft for queries	4 years ago
David Sidrane	313b3edc04	px4_fmu-v2: Use px4_platform_configure	4 years ago
Daniel Agar	c60743b306	boards: NuttX increase file name max 32 -> 40	4 years ago
Daniel Agar	81aa8a914f	boards: px4_fmu-v2 disable ver command line to save flash	4 years ago
Daniel Agar	233949a377	NuttX upgrade to 10.0.0+ defconfig changes	4 years ago
Beat Küng	d2644a3bf7	distance_sensor/sf0x: rename to lightware_laser_serial	4 years ago
David Sidrane	42b466dc45	px4_fmu-v2: Updates for NuttX 9.1.0+ External schedule_note	5 years ago
David Sidrane	77ce7b2457	px4_fmu-v2 Updates for NuttX 9.1.0- px4_fmu-v2: defconfig MMCSD enable multiblock	5 years ago
flbernier	0ece66dc80	Add a internal start for rgbled_ncp5623c on fmu-v2 v3 v4pro	5 years ago
SalimTerryLi	c037dbef21	Rename and move src/drivers/adc to src/drivers/adc/board_adc	5 years ago
Daniel Agar	2c3441aa90	boards: reduce CONFIG_NFILE_DESCRIPTORS 15 -> 12 - reduced now that calibration uses uORB::Subscription - can likely be reduced further (perhaps < 8) with additional testing	5 years ago
Daniel Agar	e3d31a881e	boards: NuttX disable posix message queues	5 years ago
Daniel Agar	d9102ce54c	imu/invensense/icm20948: sync with other recent invensense improvements - clenaup ak09916 with simplifed setup and health check	5 years ago
Daniel Agar	6f6efd60b7	boards: centralize optional external I2C sensor start - configured with new parameter SENS_EXT_I2C_PRB	5 years ago
Daniel Agar	5e7d2e830d	boards: delete old board.h boilerplate	5 years ago
Daniel Agar	6c96748e54	boards: pixhawk mini add unused MPU9250 CS & DRDY pins	5 years ago
Daniel Agar	8d0c92003a	boards: remove all CONFIG_NXFONTS_DISABLE*	5 years ago
Beat Küng	34c75f2d36	boards: temporarily disable UART TX DMA work-around for https://github.com/PX4/Firmware/issues/14659. This can be reverted when fixed properly.	5 years ago
Daniel Agar	5739cf27e5	boards: delete obsolete commented config systemcmd	5 years ago
mcsauder	6548fde024	Whitespace cleanup to quiet new blank line at EOF git hook.	5 years ago
Daniel Agar	1ac6230758	boards: always change default IMU_GYRO_RATEMAX on px4_fmu-v2/v3 and mro_x21 - this can lower cpu usage considerably on older boards	5 years ago
Daniel Agar	66eacd24bc	px4_fmu-v5_stackcheck: update stack sizes and add to Jenkins - increase stack sizes to run cleanly under stackcheck - this is likely overkill for most boards, but using stackcheck to set our minimum ensures we have a very safe margin on regular builds and it's something we can currently afford - remove holybro_durandal-v1_stackcheck from test rack (there's only one unit)	5 years ago
Beat Küng	cbed023334	px4/v{2,3}: enable tx dma on telem2	5 years ago
Daniel Agar	7aa7f0ed95	switch remaining boards to new InvenSense IMU drivers	5 years ago
Julian Oes	b01cdafcf6	boards: add esc_battery to build	5 years ago
Daniel Agar	ad559a66a1	examples: add simple work_item example module	5 years ago
Daniel Agar	40b1043e12	NuttX boards minor lpwork and init stack increases	5 years ago
Daniel Agar	15332a7e56	boards: reduce CONFIG_NFILE_DESCRIPTORS 20 -> 15	5 years ago
Daniel Agar	02f4ad61ec	I2C/SPI require device type in constructor	5 years ago
Daniel Agar	ca81175b07	rename drivers/px4fmu -> drivers/pwm_out - split out header	5 years ago

1 2 3 4

168 Commits (01c9a4f24dc38e071e4a0f7831a673a5870b1d75)