The bulk of this change was tightly coupled and needed to be deleted in one pass. Some of the smaller changes were things that broke as a result of the initial purge and subsequently fixed by further eradicating unnecessary platform differences. Finally, I deleted any dead code I came across in the related files I touched while going through everything.
- DriverFramework (src/lib/DriverFramework submodule) completely removed
- added dspal submodule in qurt platform (was brought in via DriverFramework)
- all df wrapper drivers removed
- all boards using df wrapper drivers updated to use in tree equivalents
- unused empty arch/board.h on posix and qurt removed
- unused IOCTLs removed (pub block, priv, etc)
- Integrator delete methods only used from df wrapper drivers
- commander: sensor calibration use "NuttX version" everywhere for now
- sensors: update to px4_{open, read, close} instead of DevMgr wrapper (adc open for analog differential pressure)
- battery_status: update to px4_{open, read, close} instead of DevMgr wrapper (adc open for analog differential pressure)
- cdev cleanup conflicting typedefs and names with actual OS (pollevent_t, etc)
- load_mon and top remove from linux boards (unused)
- delete unused PX4_MAIN_FUNCTION
- delete unused getreg32 macro
- delete unused SIOCDEVPRIVATE define
- named each platform tasks consistently
- posix list_devices and list_topics removed (list_files now shows all virtual files)
- instrumenting PX4 Matrix and Param methods is too burdensome
- partially restore px4_fmu-v5_stackcheck and holybro_durandal-v1_stackcheck to match default configs
- nuttx in PX4/Firmware (327c7f3672ee5f066ec53dfe1554a02d1aa610da): 2e55ce8ec9
- nuttx current upstream: 9331fda0d7
- Changes: 2e55ce8ec9...9331fda0d7
9331fda0d7 2019-12-10 David Sidrane - [BACKPORT] IMXRT106x USDHC: Support regular GPIO for CD and inversion.
91c80c708b 2019-12-05 David Sidrane - [BACKPORT] imxrt106x:pinout add ALT 8 GPIO_GPT1_CAPTURE[1|2]
32f758f0e9 2019-12-03 David Sidrane - [BACKPORT] stm32f7:Add Serial Tx DMA
- nuttx in PX4/Firmware (22a005c9f4): 2d7920055f
- nuttx current upstream: 398a59aaa4
- Changes: 2d7920055f...398a59aaa4
398a59aaa4 2019-11-29 David Sidrane - [BACKPORT] stm32f7:ethernet: Add some delays so that ifup() does not hog the CPU.
Change PID to 0x4b:
Holybro obtained their own PID and VID but APM did not follow
the PX4 convention of makeing the board_id (0x8b) match the PID)
Incorporated the Upstream Bootloader state sequencing checking change.
Change the usb cout to send all chars in 1 write.
The Addition of PX4_ARCH_DCACHE_LINESIZE is fundamentally wrong.
It asserst that an STM32F4 has a cache and it does not.
This should be #if defined() on CONFIG_ARMV7M_DCACHE
David Sidrane
Daniel Agar
Julian Oes
Christian Clauss
PX4 BuildBot
Matthias Grob
Beat Küng