04f7a7a47a
stm32:Add board Revision and version API for FMUv5 HW detection
7 years ago
d4892bf179
stm32 adc:Create board accessible API for using the ADC prior to boot
...
board_adc_init() - initalise the ADC HW once.
board_adc_sample() - read a given channel dn
7 years ago
f3e925497d
board_common:Break into internal and public api.
...
Internal functions are public functions that should realy only
be called by the board config.
7 years ago
9cc7148211
board_common:Documentation clean up merged
7 years ago
3c384f1890
Updated nuttx and apps submudule 7.22+ ==px4_firmware_nuttx-master
7 years ago
7dc8f215f6
samv7 board identity:fix sign-compare
7 years ago
83d870900c
kinetis board identity:fix sign-compare
7 years ago
7c5f3ea623
kinetis io timer:fix sign-compare
7 years ago
c44cfbf87e
nxphlite-v3 spi:fix sign-compare
7 years ago
f83df2a9a6
Updated nuttx submodule 7.22+
...
Updated to latest upstream with PX4 contrib for STM32 I2C that
fixes an hang in driver.
7 years ago
1c6dc4b84c
Updated nuttx and apps submodules to Nuttx 7.22+ ==px4_firmware_nuttx-master
7 years ago
c6eec29dec
sensors:Rework battery connected logic
...
A battery is considered connected when a) V > BOARD_ADC_OPEN_CIRCUIT_V
and if BOARD_ADC_OPEN_CIRCUIT_V > BOARD_VALID_UV connected
is further qualifed by the Valid signal.
7 years ago
d95e985f59
px4fmu-v5:Set non default BOARD_ADC_OPEN_CIRCUIT_V
...
Due to higher bias, V open circuit on the ADC is high with a 1M
termination. This override the default connected threshold on
V5 HW. Revist once lowe termination is chosen.
7 years ago
ef5d808f6d
px4fmu-v4pro:Override default BOARD_VALID_UV
...
Based on the R values on the LTC4411 the px4fmu-v4pro has a
UV of 4.01 Volts.
7 years ago
5018723eb2
board_common:Define defaults for Open circuit max and UV min
...
BOARD_ADC_OPEN_CIRCUIT_V is the voltage present on an ADC due
to the bias current on the terminition resistor.
BOARD_VALID_UV is the under voltage min set by resistors on a
board's Power selector.
A battery is considered connected when the Voltage measures is
greater than BOARD_ADC_OPEN_CIRCUIT_V.
In the case where BOARD_ADC_OPEN_CIRCUIT_V is greater then
BOARD_VALID_UV we can use the HW to qualify connected.
7 years ago
25fef84f98
px4fmu-v5:board.h fixed typo in comment
7 years ago
24eb56aa27
battery:Only change the warning level on a connected battery.
...
Connected is assumed when the battery voltages is greater than
a predefined level.
7 years ago
63ac56aeb0
smt32 adc:Ensure the the ADC clock is not out of spec
...
The data sheet for the F4, F7 indicate a maximum of 36 Mhz
in the 2.4-3.3 volt Soc operating range. This change sets
the clock based on the STM32_PCLK2_FREQUENCY.
7 years ago
dcf8d82f8c
px4fmu-v5:Update to use CONFIG_STM32F7_FLASH_ART_ACCELERATOR
...
Upstream change on F7 CONFIG_STM32F7_FLASH_PREFETCH and
CONFIG_ARMV7M_ITCM are now contorled by
CONFIG_STM32F7_FLASH_ART_ACCELERATOR
7 years ago
822b390420
Update nuttx and apps submodule 7.21+==px4_firmware_nuttx-master
7 years ago
474f216a0a
UAVCAN bootloaders split into separate repository ( #7878 )
7 years ago
f641c1e15e
Updated nuttx submodule 7.21+ ==px4_firmware_nuttx-master
7 years ago
8b2ee2cb33
Updated nuttx submodule 7.21+
7 years ago
8fe1abf8ff
nxphlite-v3:Add fxas21002c to rc.sensors
7 years ago
d0853092f5
nxphlite-v3:add fxas21002c driver to board build
7 years ago
3d6ebc0081
Added NXP fxas21002c
7 years ago
9bc1884e83
nxphlite-v3:Init and control Sensor reset pins in board init
7 years ago
929c5d9b5e
Updated NuttX submodule with upstream 7.21+
7 years ago
32d434fa8f
fxos8700cq:Fixed typo
7 years ago
01b3e6fd25
NuttX upgrade cmake wrapper ( #7873 )
...
* NuttX cmake
* px4_macros:Pass the stringified predicate as second arg to static assert
CC_ASSERT mapes to the c++ static_assert or provides the same
funtionality for c via the other macros. The c++ static assert
takes 2 argumants the prdicate and a message. This fixes the
lacking second argument.
* Updated nuttx and apps submodule to upstream nuttx 7.21+==master
This is the latest uptake of upstream nuttx and apps.
* ROMFS generate with xxd instead of objcopy
* delete nuttx-patches
* NuttX update submodules to latest px4_nuttx-master
* fix nuttx apps and board dependency
* docker_run update to latest container 2017-08-29
* cmake ROMFS portable sed usage
* NuttX update submodules to latest px4_nuttx-master
7 years ago
11e518f494
nxphlite-v3:Schedule work queue with higher priority as on master
...
was:CONFIG_SCHED_HPWORKPRIORITY=192
is:CONFIG_SCHED_HPWORKPRIORITY=249
7 years ago
bb78e71452
Using master README
7 years ago
f7d42a9e41
px4-same70xplained-v1:Moved px4-same70xplained-v1 specific README to board dir
7 years ago
7a5f58a607
px4-same70xplained-v1 nsh:Optimize memset for speed
7 years ago
a61b7203bf
px4-same70xplained-v1 nsh:Refreshed config
7 years ago
bff33ba9dc
px4-same70xplained-v1:Refreshed config
7 years ago
4fdce9bf21
px4-same70xplained-v1 nsh: increase CONFIG_NFILE_DESCRIPTORS from 53 to 54
...
Updated to match master
This is needed when logger is logging to file and ulog streaming gets
activated
7 years ago
6a4120c44c
px4-same70xplained-v1:Schedule work queue with higher priority as on master
...
was:CONFIG_SCHED_HPWORKPRIORITY=192
is:CONFIG_SCHED_HPWORKPRIORITY=249
7 years ago
442f79dac6
same70xplained-v1:use px4_micro_hal PX4_BUS_NUMBER_{TO|FROM}_PX4 mapping
7 years ago
5d33b602f3
px4-same70xplained-v1:Updated to upstream master
...
Airspeed changes
add FastRTPS
7 years ago
4b5d585e57
kinetis:Add define for PX4_NUMBER_I2C_BUSES
7 years ago
f56940e654
README for px4-same70xplained-v1
7 years ago
f04ddf4368
Inital Commit of px4-same70xplained-v1
7 years ago
0da1c79aa3
Adding Kinetis board common identity to micro hal
7 years ago
69ac5adf89
drv_sensor:Fix merge by adding new NXP sensors after what was on master
7 years ago
96b4e5b512
zubaxgnss-v1 nsh:Optimize memset for speed
7 years ago
17bf776af3
tap-v1 nsh:Optimize memset for speed
7 years ago
e53a06429c
s2740vc-v1 nsh:Optimize memset for speed
7 years ago
3f267a5cb2
px4nucleoF767ZI-v1 nsh:Optimize memset for speed
7 years ago
c71e01bd44
px4fmu-v5 nsh:Optimize memset for speed
7 years ago
David Sidrane
Daniel Agar