This should fix the case where the driver initializes even though the
device is not found. The change changes the behavior to return ERROR
if the whoami call fails several times instead of returning OK.
Also, the reset() and thus probe() calls are moved before initializing
the ringbuffer and device name.
* match max vel in col-prev to regular pos ctrl
* change warning criterium to avoid float error
* disable push back from obstacles
* use floats consistently
* Cherry pick the vehicle_imu PR #9756 src/modules/simulator directory work to submit as standalone PR.
* Modify the accelsim init method mag_report usage to match usage in measure() and mag_measure() methods in the class.
* Incorporate review comments in the accelsim.cpp init() method and also make the same modifications in gyrosim.cpp.
* Delete unneeded mag_report initialization from accelsim init() method.
* Deprecate unneeded measure() call from accelsim.cpp init() and gyrosim.cpp init().
When PX4FLOW is connected to PX4 through MAVLink (e.g., through a USB
port), the timestamp assigned to the distance_sensor was wrong. This fix
uses the same timestamp assigned to the optical_flow message created from
the same OPTICAL_FLOW_RAD MAVLink message.
Signed-off-by: Gabriel Moreno <gabrielm@cs.cmu.edu>
It wasn't possible to fly faster than cruise speed even if planned
in the mission.
Limiting the planned cruise speed is necessary because
the smoothed trajectory mission plans to the _mc_cruise_speed and
if that's higher than the maximum it gets capped for safety by the
position controller and the result is a jerky flight.
* drivers, magnetometer: added ak09916 driver to support the mag driver emulated by the Here2 gps
* boards: set yaw 270 rotation for external ak09916 driver and only start it for the PH21
* drivers: only start ak09916 when icm20948 is not available on a ph21 setup
This fixes build races which happened if "Unix Makefiles" instead of
ninja-build was used as the cmake backend.
For any dependencies of commands on files we need to create a target.
Otherwise, if "Unix Makefiles" are used as the generator the commands
are run in parallel on the different files which often can lead to
races or redundancies in our build.
A nice write-up can be found here:
https://samthursfield.wordpress.com/2015/11/21/
cmake-dependencies-between-targets-and-files-and-custom-commands/#
custom-commands-and-parallel-make
Paul Riseborough
Daniel Agar
jdzerve
Arkadiusz Niemiec
Julian Oes
liubaoxu
David Sidrane
baumanta
Roman
Dennis Millard
sfuhrer
Mark Sauder
Gabriel Moreno
bresch
Beat Küng
Matthias Grob
romain
Andreas Daniel Antener
Martina Rivizzigno
Chris Lovett
Alessandro Simovic
PX4 Build Bot
Julian Kent