- vehicle_attitude_setpoint thrust_body is a vector, but mavlink ATTITUDE_TARGET thrust is only a magnitude
- this allows the stream to be correct for both MC & FW use cases
This will ensure that the CRCs will match with deployed units to avoid unnecessary incompatibilities while we are figuring out how to best standardize these between stakeholders.
- currently the main change is that it reduces the max number of ORB multi instances to 4, but usage will be expanded as needed
- limits number of EKF2 multi instances to 2.
- enabled on all cortex m4 boards
The overhead of the MAVROS setup means that most developers are not using it, leading to tests that are not suitable for day-to-day workflows. We are replacing these with MAVSDK tests that can be run locally pre-commit.
- sitl_gazebo in PX4/Firmware (bb7dd0cf00): 46aef29718
- sitl_gazebo current upstream: e580bbcd1e
- Changes: 46aef29718...e580bbcd1e
e580bbc 2021-01-30 JaeyoungLim - Use include model syntax for bluerov (#702)
663a553 2021-01-30 Tim - Added GPS and changed the Thruster config of the bluerov2 SDF file (#700)
4674826 2021-01-29 Thies Lennart Alff - increased ODE solver iterations to avoid deflection of the thrusters (#701)
This system command will display, set and save the network
settings.
netman show - Displays the current settings.
netman update - Will check for a net.cfg file on the SD card.
If present, it will update the paramaters,
delete the file, and reboot. Using the new settings.
netman save - Saves the current settings to net.cfg on the SD card.
This file shoulf be renamed to preserver it across
reboots or editited to chech networkin paramates.
File format is name<space>value:
echo DEVICE=eth0 > /fs/microsd/net.cfg
echo BOOTPROTO=fallback >> /fs/microsd/net.cfg
echo IPADDR=192.168.0.4 >> /fs/microsd/net.cfg
echo NETMASK=255.255.255.0 >>/fs/microsd/net.cfg
echo ROUTER=192.168.0.254 >>/fs/microsd/net.cfg
echo DNS=192.168.0.254 >>/fs/microsd/net.cfg
Valid values for `proto` are `dhcp`, `static`, `falback`
Both will try dhcp for CONFIG_NETINIT_FALLBACK times
and fall back to the static address.
NETMASK - is the network mask.
IPADDR - this nodes ip address for static or fall back.
ROUTER - The default route.
DNS - The address of the dns server.
* stm32_common: Add support for STM32F42x/STM32F43x rev. 5/B
According to ST, both 5 and B share the same REV_ID.
Signed-off-by: Alexey Rogachevskiy <sfalexrog@gmail.com>
* stm32_common: Change comment to match code, change enum names to match revisions
- generate PWM_MAIN 1-14
- generate PWM_AUX 1-8
- generate PWM_EXTRA 1-8
- px4io and pwm_out directly read configuration parameters
- only available and active physical outputs are actually shown for configuration
- overall saves flash despite adding many new parameters
TSC21
CarlOlsson
dino
Daniel Agar
Benoit Landry
Lorenz Meier
Peter van der Perk
Silvan Fuhrer
Claudio Micheli
Chungkyeong Lee
Jaeyoung-Lim
PX4 BuildBot
David Sidrane
Alexey Rogachevskiy
Matthias Grob
Igor Mišić
bresch