537f72073d
minor: uppercase typo and unused header
8 years ago
8c9f4e8ab8
added which transition the vtol is in to vehicle status
9 years ago
76387b1693
uorb autogeneration
9 years ago
535cea4e77
commander: remove load from vehicle_status message
9 years ago
9512a71cf8
commander: cleanup the status messages
9 years ago
5ca5af5fcd
commander: take main_state out of vehicle_status
...
This state is only commander internal. Therefore it doesn't need to be
in vehicle_status. Instead it is now in the commander_state message.
9 years ago
70cff975cc
commander: move some flags out of vehicle_status
...
All the removed flags were not used anywhere else than inside the
commander.
9 years ago
23df992cc5
commander: moved offboard bools into status_flags
...
The offboard status bools were not used anywhere but in the commander.
Therefore they are now moved to the local status_flags topic.
9 years ago
1f44fb1efd
commander: internalize system status bools
...
Most condition bools in the commander are not used anywhere but in the
commander. It therefore makes sense to move them to a different internal
struct and remove them from the vehicle_status message.
Also, the land_detected should be used by all the modules instead of
getting it through the commander and system_status.
9 years ago
141b984d5b
commander: take previous main state out of status
9 years ago
181eb49da8
commander: remove calibration_enabled
...
This flag is not used anywhere, it therefore doesn't need to be in
vehicle_status.
9 years ago
fe85841a1d
commander: remove counter
...
The counter variable in system status wasn't used anywhere.
9 years ago
32c3135788
commander: move battery calculations to systemlib
...
The commander used to consume the battery_status topic and write the
contents after some calculations into the system state. Instead, the
calculations now happen in library calls in systemlib/battery.
This moves the battery fields out of the vehicle_status message into the
battery_status topic.
This brought quite some changes in all modules that need battery
information. The current state is compiling but untested.
9 years ago
699b08c9fd
commander: move battery warning
...
The battery warning is not consumed anywhere, therefore scrap it from
the vehicle_status message.
9 years ago
8e9e9f8a8b
vehicle_status: move vtol_vehicle_status enum
...
It makes more sense to have the VTOL status in its own message.
9 years ago
74072dbe74
vehicle_status.msg: delete unused mavlink stuff
...
The MAV_TYPE enum was not in sync with the mavlink specs anymore. It
makes therefore sense to remove the duplication and include the correct
mavlink header file where it is needed.
Also, error counts which are not populated, can be scrapped.
9 years ago
5f3a23a253
commander: remove circuit breakers from status msg
...
Since the circuit breaker bools are not actually used anywhere else than
in the commander, it is safe to remove them and replace them with local
bools.
9 years ago
bbc8eaefd7
Adding new follow target navigation and main states. New follow target
...
topic added. New follow fsm added to the navigator
9 years ago
f472ac577a
Cleanup for manual control messages
9 years ago
eb5b8a32ee
transition alignment will force heading now and go to RTL if it cannot reach it in time, handle mission failure correctly, reset after mission update, issue message with actual problem
9 years ago
d5eae460c0
VTOL transition failsafe RTL
9 years ago
e60cd46ad0
removed duplicate and unused flag vtol_in_transition
9 years ago
fbf42c8949
added auto takeoff support, updated configuration for solo and generalized landing mission items
9 years ago
1f50041311
added flag indicating if vtol is doing a transition
...
Conflicts:
msg/vtol_vehicle_status.msg
9 years ago
7d59213a01
Add takeoff commands / flags
9 years ago
c51f414b22
Vehicle status remove unused field
9 years ago
0fdc0e28c7
Messages: Add USB breaker and control state horizontal acceleration
9 years ago
5fcfdb759c
commander : hotplug sensor support, better failure reporting
9 years ago
c4a82d78c8
Added commander support for rattitude mode. Still need to incorporate attitude/rate switching in multicopter control
9 years ago
4de6012f12
Commander: Only indicate green led if home position is valid
9 years ago
1da703a13d
implemented MAVLink command for VTOL transitions, pulled switch up for each type
10 years ago
04f55ce784
vtol fixes:
...
- mc pos control: publish attitude setpoint when vtol is in trans mode
- fw att control: do not publish attitude setpoint when in transition mode
- introduce flag in_transition_mode in vehicle status message for vtol
- improve tiltrotor code based on flight testing
10 years ago
8e935e6fa6
Add new stabilize mode
10 years ago
be6ab2ca7d
vehicle_status topic: Changed / fixed signedness
10 years ago
2747093028
vehicle status: Rename field which controls RC input mode
10 years ago
009815deb0
Improve config and mapping
10 years ago
01fd84e4dc
mavlink and commander app: Add support for manual input, either directly or via remote control
10 years ago
b54d4f5b05
vehicle status: Add field to disable RC input (and required checks for it)
10 years ago
6d7e063148
Added GIT version which recompiles on each build
10 years ago
4dd343e2de
added field for autopilot capabilities
10 years ago
9179fcefc9
Calibration state machine fixes, generates less bogus error messages during calibration
10 years ago
83fdb9931a
commander / mavlink: Add battery status to output BATTERY_STATUS MAVLink message
10 years ago
bd1c3363df
added new vtol mav types
10 years ago
64cdcfc0cc
Fix detection of USB connected state. Needs bench test without USB
10 years ago
Matthias Grob
Andreas Antener
Daniel Agar
Jonathan Challinger
Julian Oes
Jimmy Johnson
Lorenz Meier
sander
Roman Bapst
Lorenz Meier
Kabir Mohammed
Eddy Scott
Roman Bapst