Beat Küng
ed9d25a75a
logger: add arming/disarming via AUX1 RC channel logging mode
6 years ago
Beat Küng
6da78c956e
SYS_COMPANION: remove this parameter
...
It was already deprecated.
6 years ago
Beat Küng
5d6cc7d033
ekf2: reduce GPS initialization time for SITL from 10s to 0.5s
...
Speeds up SITL startup.
6 years ago
Timothy Scott
d78a842ca8
Rover: add airframe configuration for Aion R1 Rover ( #12026 )
...
* Added Aion R1 airframe
* Tuned PID values for Aion R1
* Changed to generic mixer and cleaned up configuration
6 years ago
Julian Oes
01fdd00c41
init.d-posix: $ is apparently not needed here
6 years ago
Julian Oes
ffeeedc310
init.d-posix: raise timeouts for fast SITL
...
When simulating with lockstep we can raise the speed by setting the env
variable `PX4_SIM_SPEED_FACTOR`. Some inputs like RC, MAVLink heartbeats
from a ground station, or offboard controls via MAVLink are still at the
normal speed which leads to timeouts getting detected in PX4.
To work around this issue we can automatically multiply the timeout
parameters by the speed factor.
6 years ago
Beat Küng
2448a84c36
SITL: add if750a model
6 years ago
Claudio Micheli
e7075a6660
rcS: Fix multiple set IO_PRESENT.
...
Signed-off-by: Claudio Micheli <claudio@auterion.com>
6 years ago
Julian Oes
611417acd2
ROMFS: use auto-disarm in HITL Gazebo with Iris
...
It is expected that Iris auto-disarms the same as in SITL.
6 years ago
Daniel Agar
f032d0d9fc
SYS_MC_EST_GROUP mark LPE unsupported and update airframes ( #11925 )
6 years ago
Julian Oes
4ef59e0a59
standard_vtol: transition at airspeed of 16 m/s
...
This way we prevent a big dip due to TECS in altitude when the
transition happens at 10 m/s already. Apparently the rule of thumb
is to set this transition speed at the same as airspeed cruise speed.
6 years ago
bresch
89bc68e12b
Auto - Rename MC_YAWRAUTO_MAX -> MPC_YAWRAUTO_MAX
6 years ago
sfuhrer
3d36dbfba3
added babyshark VTOL config file and mixer
6 years ago
Beat Küng
744b50b478
send MAVLink GROUND_TRUTH at 25 Hz, only in SIH mode. And minor cleanup
6 years ago
romain
e1d9438f79
sih: remove SYS_SIH parameter and extend SYS_HITL
6 years ago
romain
6ff228c2ff
sih module implemented with hrt_call_every and semaphore_wait
6 years ago
Beat Küng
914a9b78b6
new airframe for sih, HIL_STATE_QUATERION sent through MAVLink
6 years ago
Daniel Agar
5a50f96bcf
move icm20948 (Here GPS compass) to Cube sensors start ( #11838 )
6 years ago
Julian Oes
98857b4b94
ROMFS: don't check for UAVCAN_ENABLE param in SITL
...
This prevents a warning message being printed to SITL users because the
UAVCAN_ENABLE param does not exist.
6 years ago
Julian Oes
82682ac716
init.d-posix: re-use rc.logging
...
With this change the param SDLOG_MODE can be used for SITL as well.
6 years ago
Beat Küng
0bb5225370
rcS: add airframe parameter versioning and extend SYS_AUTOCONFIG
6 years ago
Daniel Agar
0c226e9b64
cmake fix ROMFS build dependencies
6 years ago
mcsauder
e6f1a2db12
Delete trailing whitespace, extra newlines, to quiet git hooks and add an extra = so that it does not appear to git as a merge conflict marker.
6 years ago
David Sidrane
eb58dae51b
lights:Remove conditional rgb led starting (do all of them)
...
There is no need to not to start a pwm based led or a
rgbled_ncp5623c if the old TCA62724FMG is started. They
will all work in parallel.
6 years ago
Nico van Duijn
b7784a1439
Add MAVLink stream and cmake sitl target
6 years ago
DanielePettenuzzo
75f1ad36d1
start px4flow after all rangefinders (including the ones going through rc.serial)
6 years ago
Beat Küng
14ef009aab
logging: add SDLOG_MODE = -1 to disable logging completely
6 years ago
Julien Lecoeur
5f06c6a1aa
VTOL: add parameter to prevent flight if roll direction was not checked
...
Mark V19_VT_ROLLDIR @category system
Throttle down mavlink critical msg
Send 0 actuator_output for safety
VTOL: unset v1.9 roll direction safety check param for builtin airframes
6 years ago
Julien Lecoeur
e28f8a7f2e
VTOL mixers: invert FW roll sign in builtin mixers
...
This inversion matches the fixed sign in the commands generated
by the VTOL attitude controller.
This commit, combined with the previous commit, should have no effect.
For safety, it is recommended to check the direction of roll control
surfaces before flight.
6 years ago
Martina Rivizzigno
09b795161e
Obstacle Avoidance testing in CI ( #10780 )
6 years ago
Beat Küng
6c3e79f361
mc airframes: reduce I gains a bit
...
A side-effect of the previous commit is that the integral is loaded up
during a flip, which leads to visible bounce-backs after a flip.
Reducing the I helps, but there's a trade-off and we'll need a better
solution.
6 years ago
Hamish Willee
5132368378
Flying Wing init files: Fix up main output docs
6 years ago
Hamish Willee
e5dbd39ca6
Fx79 Frame: Reverse aileron outputs
6 years ago
DanielePettenuzzo
24f77ec5a4
rcS: start camera_capture later in script
6 years ago
DanielePettenuzzo
6b65eb2225
camera feedback: remove CAM_FBACK_MODE param. CAM_CAP_FBACK from camera capture driver will be used instead.
6 years ago
DanielePettenuzzo
d49752141d
rename camera capture feedback param and move it from camera_feedback module to camera capture driver
6 years ago
DanielePettenuzzo
42afc88285
add camera trigger feedback (input capture when camera actually takes the photo)
6 years ago
bresch
faa8b6fe6d
Camera Capture - enable capture at startup
6 years ago
Mohammed Kabir
94bb02a9c7
Add camera_capture driver
6 years ago
Daniel Agar
2d922b5cb4
FW airframe defaults relax EKF2 GPS checks
6 years ago
Beat Küng
aa020eb28e
airframes: add Holybro QAV250
6 years ago
Julien Lecoeur
fe83378db4
Tiltrotor: Do not lock elevons in multirotor mode
...
The behaviour is unchanged because VT_ELEV_MC_LOCK was not implemented for tiltrotors
6 years ago
Julien Lecoeur
6c1d85716c
Convergence: Do not lock elevons in multirotor mode
...
The behaviour is unchanged because VT_ELEV_MC_LOCK was not implemented for tiltrotors
6 years ago
Julien Lecoeur
15f9b70431
Claire: Do not lock elevons in multirotor mode
...
The behaviour is unchanged because VT_ELEV_MC_LOCK was not implemented for tiltrotors
6 years ago
Julien Lecoeur
9b5dd1596f
FireFly6: Do not lock elevons in multirotor mode
...
The behaviour is unchanged because VT_ELEV_MC_LOCK was not implemented for tiltrotors
6 years ago
Anthony Lamping
77ea5249a1
startup: add plane_cam
6 years ago
Daniel Agar
115c31451c
SITL use EKF2_MAG_TYPE default value
6 years ago
Daniel Agar
8dc0509989
mpu9250: split icm20948 support out into new separate driver
6 years ago
Daniel Agar
489ea68b8d
ROMFS fix pruned dependency and cleanup
6 years ago
David Sidrane
78619514b7
ROMFS/CMakeLists build gencromfs
6 years ago