1eb10e431f
Create CODE_OF_CONDUCT.md
8 years ago
6ae2d22b9a
WIP: github issue template ( #7701 )
...
* WIP: github issue template
* Update issue_template.md
8 years ago
d5a890041b
commander RTL failsafe should be sticky
8 years ago
11508e080a
Create 3037_parrot_disco_mod ( #7621 )
...
* Create 3037_parrot_disco_mod
Add support for the Parrot Disco airframe. Tested with both Pixhawk Mini and Pixracer, using a generic 30A ESC and a Cobra 2221/16 motor.
* Update 3037_parrot_disco_mod
fixed indentation per @Dagar
* Use new generic FW wing mixer (fw_generic_wing.main.mix)
8 years ago
6e4ba1196b
nuttx_px4fmu-{v1,v2}_default.cmake: disable sdlog2
...
Due to flash overflow
8 years ago
b1215a6ddd
px4_shutdown_request: make sure we release the lock in every case
...
board_shutdown should not return, but just in case
8 years ago
b89deaf8e3
tap-v1/tap_pwr.c: make sure to invoke the button notification on registering the cb
8 years ago
c5a1d1928d
px4_shutdown_unlock: check that counter is > 0
8 years ago
007b6dd8d7
commander: make sure the power_button_state topic is advertised on startup
...
Otherwise the publication from IRQ context won't work
8 years ago
8923664f30
param: seek to the beginning of the file before re-trying a failed export attempt
8 years ago
9d924bea3f
reboot command: add lock/unlock commands to test the shutdown lock
...
If needed it could be used in scripts as well.
8 years ago
dcb5f80180
shutdown: increase the max timeout to 5s
...
To make sure slow param writes will finish before we hit the timeout. I've
seen param write durations of around 2s.
8 years ago
931ef189b5
param: grab the shutdown lock while writing params to the file
8 years ago
898a8dcd57
shutdown: add px4_shutdown_{lock,unlock} API methods
...
Prevents the system from shutting down.
8 years ago
2815c62acf
fix power button shutdown: use an orb topic instead of a work queue call
...
px4_shutdown_request() was called from the power button IRQ callback, which
invoked a work queue callback. But on NuttX, the work queue uses a
semaphore, and thus it cannot be called from IRQ context.
This patch switches to publishing an uORB msg instead, which is handled in
the commander main thread.
To increase failure resistance, we could subscribe to the same topic in
another module for redundancy, in case commander runs wild.
8 years ago
61b0a81bf9
HITL startup: Further simplification of boot logic in commander
8 years ago
03324e0fb1
ROMFS: Remove stale HITL config
8 years ago
5838556742
HITL handling: Enforce the use of the activation parameter for HITL configuration
8 years ago
8aa1382e08
ROMFS: Switch HIL to a setting orthogonal to airframes
...
This makes it easy to flip any airframe config over to HIL.
8 years ago
8878be5741
MC land speed: Ensure that the difference between land speed and land detection is high enough
8 years ago
6f249472e0
FMUv5: Ensure there is enough UART buffer space - since the board has plenty of RAM, all UARTs are treated equally
8 years ago
235a789a47
FMUv4 configs: ensure there is enough TX buffer space
8 years ago
ad21dc3f50
Pixhawk configs: Ensure there is enough TX space on high-speed UART links
8 years ago
dc4faa81de
MAVLink: Only initialize where required
8 years ago
6b17db35b0
MAVLink: Fix vibration message timestamp
8 years ago
3f048e8a87
MAVLink stream: Do not override interval too much
8 years ago
af451ce638
MAVLink time sync: Better output handling
8 years ago
f0e8ebb2ac
MAVLink: Remove link termination command
...
This is no longer required as we have a full shell available now and there is no reason to let the remote terminate the instance.
8 years ago
37657cf99b
MAVLink FTP: Use modern output printing to capture errors in system log
8 years ago
68d70cc8c0
MAVLink: Use modern PX4 output format to enable system logging for errors.
8 years ago
09f1373a08
MAVLink: Adjust stream rates to match real usage
8 years ago
07ced9895c
MAVLink: Improve message handling / tracking
...
The message handling was not obeying action focused messages and high-rate messages properly before. With this change update rates track the desired rates closely. Critical high-rate messages such as ADS-B are queued additionally to guarantee that all received packets are being correctly forwarded.
8 years ago
556eb9e45a
fix the bug for posix_sitl_inav
8 years ago
1867573b02
VTOL don't poll parameter_update
8 years ago
66f0912b9d
FW attitude don't poll parameter_update
8 years ago
efafc17b0c
FW position don't poll parameter_update
8 years ago
cf87096b05
EKF2 don't poll parameter_update
8 years ago
ddc4500753
FW landing optionally disable heading hold ( #7617 )
8 years ago
5324f30cb6
ekf2: Let the EKF know if the vehicle is operating as a fixed wing type. ( #7667 )
...
Setting this enables the EKF to use the GPS velocity to recover from bad compass yaw at launch.
8 years ago
a240eeb86a
update sitl gazebo to include tranformation fix
8 years ago
44cd65798b
update sitl_gazebo to use the vision position estimate
8 years ago
dc8caeaedf
MAVLink: Default to standard stream config
8 years ago
1eda66c9ba
Code format
8 years ago
7612b94c72
Allow relaying from same system ID or with target component 0
8 years ago
9124617315
MAVLink: Always enable forwarding for companion link
8 years ago
c44322ca15
MAVLink app: Use more advanced forwarding logic
8 years ago
98bd6e43e8
SDP3x: Add model for pitot pressure drop
8 years ago
ae1f8381ce
disable uavcan build to make space for other modules
8 years ago
f746f9a9b3
UAVCAN: Reduce memory footprint
8 years ago
0b9e32ca3e
aerofc: Reboot board when force bootloader pin is set
...
This can help "unbrick" AeroFC when a bad firmware is loaded
and it keeps rebooting or it spinning in some loop.
No need to request to stay in booloader as it will stay
in bootloader because the pin is set.
8 years ago
Lorenz Meier
Daniel Agar
Jan Liphardt
Beat Küng
stmoon
Paul Riseborough
ChristophTobler
sanderux
José Roberto de Souza