Flight tested: ekf2 w/ mag and compass by @nathantsoi: https://logs.px4.io/plot_app?log=79b81031-cf1e-41f0-890b-d6cd7d559766
NOTE: external I2C devices need a pullup. I have tested with a 3.3v 2.2k pullup.
Working:
- mpu6000, bench tested and verified via nsh
- fmu
- all 6 ch output bench tested w/ pwm and oneshot via nsh
- ppm input bench tested
- dsm input bench tested
- bmp280, bench tested and verified via nsh
- hmc5883, bench tested and verified via nsh, but requires an external i2c pullup
- gps on uart6
- startuplog, nsh, mavlink on uart4, but params are not sent for some reason. RSSI pin is TX, MOTOR 5 is RX (normal mode, 57600 baud)
- rgbled over i2c, bench tested and workingp
- sbus via the shared sbus/ppm pin (which includes an inverter to the mcu SBUS in pin), remove the solder bridge or jumper to the ppm pin before use
Not yet implemented:
- ADC
- OSD: passthrough video is untested, use at your own risk until a basic driver is implemented.
-created a test base class to centralize redundant methods among the different tests
-added mission waypoint list topic listener (this also helps make sure the simulation is ready)
-check number of mission waypoints in FCU against mission
-increase time for mavros topics to be ready from 30 to 60 seconds
-reduce position check loop rates
-clean up logging
-support QGC plan for mission file format, see #8619
-vehicle is an arg for mission test launch file, working toward other airframes
-Jenkins: fix vtol vehicle arg value
-get MAV_TYPE param and use FW radius for pure fixed-wing mission position check
-remove unused vehicle arg from test in multiple tests launch, clearing runtime warning
Daniel Agar
Nuno Marques
Anthony Lamping
nathan