The mapping itself was seprated out into a calls because it was reused
for the experimental nudging implementation.
The position resets which were handled correctly before now
change the wrong setpoints and I adjusted.
The nudging has to be before any filtering, then these member setpoints
which are essentially copies are not needed anymore.
- ecl in PX4/Firmware (afb692ecffccc3ba7ade39c5906c8c5660066121): cd38621dd6
- ecl current upstream: 602e65146c
- Changes: cd38621dd6...602e65146c602e651 2021-02-05 Paul Riseborough - EKF: Remove unnecessary initialisation
6f664ab 2020-07-20 Paul Riseborough - EKF: Non functional changes arising from review
b87778e 2020-06-30 Paul Riseborough - EKF: Make clip detection logic easier to follow
9aa8d93 2020-06-30 Paul Riseborough - EKF: Use isRecent function
e948b35 2020-06-29 Paul Riseborough - EKF: Don't reject vertical aiding data if inertial solution is bad
c566318 2020-06-23 Paul Riseborough - EKF: misc improvements to handling of accel clipping
9c89fa3 2020-06-02 Paul Riseborough - EKF: Use IMU clipping to adjudicate bad accel data check
The velocity setpoint of the position controller
does a jump when unlocking position with a non-zero position error.
This is solved by using the velocity setpoint feedback to smoothly
take over.
Improves compression, e.g. current params file: 62KB to 51KB
There's also a PRESET_EXTREME option, which reduces by another 2KB.
We can revisit that once needed, as it increases mem usage as well.
- implement COMP_METADATA_TYPE_VERSION & add component_version.json.gz to
ROMFS for all targets.
- implement COMP_METADATA_TYPE_PARAMETER (only enabled for SITL currently)
With a higher responsiveness, after centering the stick, the velocity and
acceleration setpoints could oscillate around 0 and never reach 0, due to
discretization.
This also prevented position lock engagement.
- libcanard in PX4/Firmware (0c6cf6cb99): cde6703474
- libcanard current upstream: 55938c51cf
- Changes: cde6703474...55938c51cf
55938c5 2020-12-29 Pavel Kirienko - Merge pull request #160 from UAVCAN/readme-fix
1c91c49 2020-12-29 Pavel Kirienko - Improve the example in README, fix#159
Fixed UAVCAN146 linker script that caused CXX initalization to wrong
Enabled uORB listener command
Updated UAVCANv1 msg definition
Known isssue: PX4 params are not working on the UAVCAN146
- same pattern as other new drivers (state machine, checked register mechanism, no sleeps, etc)
- self test has been rolled into regular startup sequence
- still I2C only, but will be expanded in the future
- configure to high accuracy preset
Jaeyoung-Lim
Matthias Grob
Julian Oes
Igor Mišić
Daniel Agar
PX4 BuildBot
David Sidrane
Benjamin Perseghetti
Beat Küng
Mathieu Bresciani
Lorenz Meier
Peter van der Perk
bazooka joe