Tree: 500d80c329

main

master

my1.12

my1.12-iic

pr-sensor-distance

release/1.12

sbg

tf-1.12

tf-1.12-print_test

tf-iic2uart

tf_driver-1.12

tf_i2c-1.12

tf_i2c_collis_pre

v1.13.0-BW

Branches Tags

${ item.name }

Create tag ${ searchTerm }

Create branch ${ searchTerm }

from '500d80c329'

${ noResults }

Commit Graph

166 Commits (500d80c3291a5ea8f33b499b383ef29b64520efc)

Author	SHA1	Message	Date
Peter van der Perk	33fd65e5fe	[Kconfig] Fix regressions found by bloaty and cleanup unused cmake	3 years ago
Peter van der Perk	b3e799e277	[Kconfig] Add all distance sensors	3 years ago
Peter van der Perk	21e6547ac7	[Kconfig] Toolchain & platform fixes, SITL still broken	3 years ago
Peter van der Perk	6af0477733	[Kconfig] Gnerate px4board from old cmake ... Added make updateconfig to update all config when default's have changed Added cmake to px4board conversion script	3 years ago
Daniel Agar	bbfaa4694c	boards: cleanup serial RX DMA hrt_call_every ... - remove ts_to_abstime dependency	3 years ago
Daniel Agar	c271a9e3e6	add sd_stress to all boards and run on test rack	3 years ago
bresch	1443f773da	mbe: add module to targets	3 years ago
bresch	5874b1f87c	mc atune: add module to all targets ... - adjust flash constrianed targets to fit	3 years ago
Beat Küng	c5c80e31b6	boards: remove DIRECT_INPUT_TIMER_CHANNELS from board_config.h	3 years ago
Beat Küng	a8e75d174c	boards: remove BOARD_HAS_PWM and use DIRECT_PWM_OUTPUT_CHANNELS	3 years ago
David Sidrane	bb913ae11a	system_load:Track Dynamic PID hash	4 years ago
David Sidrane	53477a1f82	av_x-v1: Update nsh defconfig NuttX 10.1.0+ CONFIG_NET_SOCKOPTS Automatic	4 years ago
David Sidrane	24a263a6bc	av_x-v1: Update nsh defconfig NuttX 10.1.0+	4 years ago
Beat Küng	0e1f3a2d62	px4_add_board: infer VENDOR, MODEL & LABEL from cmake file name	4 years ago
David Sidrane	05bdef867d	Track NuttX syslog change	4 years ago
echoG	6bc09138c1	Adding BatMon smart battery as a module and refactoring SMBUS based SBS 1.1 spec to a library	4 years ago
Daniel Agar	5f775b508f	boards: enable CONFIG_OTG_ID_GPIO_DISABLE on all F7/H7	4 years ago
David Sidrane	32e92ba817	Revert:Pull downs - bad levels cause motor spins	4 years ago
Daniel Agar	c3884b5bc1	fake_imu (formally fake_gyro) updates for testing gyro filtering ... - fake_imu now publishes sine sweeps over 10 seconds - accel is also published so that fake IMU can be selected when the only option	4 years ago
David Sidrane	d6a54910b4	av_x-v1: Initalize PWM as input with Pull Downs	4 years ago
Daniel Agar	58b40fbbb9	boards: move testing to dedicated test variants	4 years ago
Daniel Agar	ad934b4911	icm20948 i2c passthrough driver for ak09916 magnetometer (Here+ GPS/compass) ... - include icm20948 on most boards by default - create more test variants for default boards near flash limit (cuav_nora_test, cuav_x7pro_test, holybro_durandal-v1_test)	4 years ago
Daniel Agar	6874e9fba0	boards: NuttX disable all NSH memory debug commands (mb, mh, mw) by default ... - closes https://github.com/PX4/PX4-Autopilot/issues/17062	4 years ago
Daniel Agar	631d1647d3	boards: minimize unnecessary differences in default variants	4 years ago
Daniel Agar	2257c3767e	simple gyro auto calibration module	4 years ago
Daniel Agar	f8eaa6e46b	ROMFS handle bl_update generically ... - include all available legacy bootloaders	4 years ago
Daniel Agar	4d288512b5	add board architecture specific init defaults	4 years ago
Daniel Agar	19de1e57e3	gyro_fft promote to modules and include on all boards	4 years ago
garfieldG	3cd9b3c2cf	Added support in Mavlink Ethernet channel parameters ... Mavlink Ethernet channel settings such as udp port, remote port and broadcast mode now can be changed dynamically via parameters.	4 years ago
Beat Küng	7e33d03470	drivers: remove tap_esc ... - it's not used anymore - it would need a refactoring to use mixer_module	4 years ago
Daniel Agar	414f9f81d9	move fake GPS to standalone module	4 years ago
Daniel Agar	ab0d0fd0be	uORB move to PX4 platform layer	4 years ago
Daniel Agar	fb2a199621	delete unmaintaned mkblctrl driver	4 years ago
Daniel Agar	a257120e8d	boards: use new param default mechanism	4 years ago
Daniel Agar	8f0918a16b	boards: remove unused linker __param section	4 years ago
Daniel Agar	1ec10bfcc6	boards: disable CONFIG_ARMV7M_LAZYFPU again (#16573) ... - this was causing hard faults on the CUAV Nora and possibly other boards, disabling everywhere until we fully understand the root cause	4 years ago
Daniel Agar	cb74cb8692	boards: enable CONFIG_ARMV7M_LAZYFPU everywhere	4 years ago
Daniel Agar	763c3b8fda	boards: start enabling multi-EKF by default on F7/H7	4 years ago
Matthias Grob	7545249215	Add flight_mode_manager to all targets with mc_pos_control	4 years ago
David Sidrane	a09d240c72	av_x-v1: Use px4_platform_configure	4 years ago
Daniel Agar	233949a377	NuttX upgrade to 10.0.0+ defconfig changes	4 years ago
Tanja Baumann	b5ebdb8e41	add system command to get and set system time ... * add system_time command for all boards	4 years ago
David Sidrane	aa463e31b4	av_x-v1: Updates for NuttX 9.1.0+ External schedule_note	4 years ago
David Sidrane	e487833347	av_x-v1 Updates for NuttX 9.1.0- ... av_x-v1: defconfig MMCSD enable multiblock	4 years ago
SalimTerryLi	c037dbef21	Rename and move src/drivers/adc to src/drivers/adc/board_adc	5 years ago
Daniel Agar	2c3441aa90	boards: reduce CONFIG_NFILE_DESCRIPTORS 15 -> 12 ... - reduced now that calibration uses uORB::Subscription - can likely be reduced further (perhaps < 8) with additional testing	5 years ago
Beat Küng	316085c154	camera_capture: remove board-specific ifdef	5 years ago
Daniel Agar	e3d31a881e	boards: NuttX disable posix message queues	5 years ago
Daniel Agar	6f6efd60b7	boards: centralize optional external I2C sensor start ... - configured with new parameter SENS_EXT_I2C_PRB	5 years ago
Daniel Agar	5e7d2e830d	boards: delete old board.h boilerplate	5 years ago