* parameter and logic to commander for triggering failsafe from external automatic trigger system.
* logic to startup script for enabling ATS. Added uORB publishing to pwm_input module.
* Refactored out CDev usage from pwm_input and ll40ls. Refactored out ll40ls specifics from pwm_input and cleaned up dead code.
-moved rc.mavlink to the boards optional rc additions (now it's called rc.board_mavlink) to handle board specific mavlink needs (mavlink over usb, ethernet, additional streams, etc.)
-mavlink module will be responsible to usb defaults, therefore less args are needed to be passed to mavlink module if one wants to use mavlink over usb.
-the way to check if connection is usb is by it's designated variable and not by config mode.
This new airspeed module does:
-runns an airspeed validator for every airspeed sensor present, which checks measurement validity and estimates an airspeed scale
-selects another airspeed sensor if for the current one a failure is detected
-estimates airspeed with groundspeed-windspeed if no valid airspeed sensor is present
-outputs airspeed_validated topic
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
* Set/unset rcS vars at beginning and end of rcS script and reduce a few LOC checking SYS_AUTOCONFIG with improved logic.
* Restore current placement of set/unset vars in rcS script to leave only the SYS_AUTOCONFIG logic modification.
* Replace set AUTOCNF no after inadvertent deletion.
tone_alarm was started before the parameters were loaded, and the first
tune was played before that as well. CBRK_BUZZER was then read as default,
ignoring the user-configured value.
We now start tone_alarm after we load the parameters. Note that a
previously published startup tone or SD card error will still be played.
Jacob Dahl
Daniel Agar
RomanBapst
Beat Küng
BazookaJoe1900
garfieldG
Silvan Fuhrer
Julien Lecoeur
Mark Sauder
David Sidrane
Timothy Scott
Claudio Micheli
romain
David Sidrane
DanielePettenuzzo
bresch
Mohammed Kabir
Julian Oes