- update to NuttX with stm32f4 and stm32f7 SPI DMA internal buffers
- remove explicit DMA buffer allocations from new IMU drivers
- restore original BOARD_DMA_ALLOC_POOL_SIZE
- decrease SPI DMA thresholds based on fmu-v2/v3/v4/v5 bench testing
Chip-select and SPI initialization uses the new config, whereas the drivers
still use the existing defines.
The configuration in board_config.h can be removed after all drivers are
updated.
- nuttx in PX4/Firmware (b7a83e23c5e50896bb137266cf89ff928dfaae42): d509b1edd7
- nuttx current upstream: bf646dcf46
- Changes: d509b1edd7...bf646dcf46
bf646dcf46 2020-03-03 Daniel Agar - [BACKPORT] stm32h7: spi_exchange (no dma) available with CONFIG_STM32H7_SPI_DMATHRESHOLD
f2a7ef0ade 2020-03-03 Daniel Agar - [BACKPORT] stm32f7: spi_exchange (no dma) available with CONFIG_STM32F7_SPI_DMATHRESHOLD
7ffc59ba3d 2020-03-03 Daniel Agar - [BACKPORT] stm32: spi_exchange (no dma) available with CONFIG_STM32_SPI_DMATHRESHOLD
d1c8fdb5fb 2020-03-02 Daniel Agar - [BACKPORT] arm/stm32h7 add STM32H7_SPI_DMATHRESHOLD
fa8d636118 2020-03-02 Daniel Agar - [BACKPORT] stm32f76xx77xx_dma.h fix DMAMAP_SPI2_RX_2/DMAMAP_SPI2_TX_2
762d80b217 2020-03-02 Daniel Agar - [BACKPORT] arm/stm32f7 add STM32F7_SPI_DMATHRESHOLD
4f4bbbbf1c 2020-03-02 Daniel Agar - [BACKPORT] arm/stm32 add STM32_SPI_DMATHRESHOLD
Co-authored-by: PX4 Build Bot <bot@px4.io>
* Introduce "px4_arch_adc_reference_v"
* Revert "Introduce "px4_arch_adc_reference_v""
This reverts commit 93691fbbd55a1b8da8c190e225b318067d90399b.
* use structure to return sample count and vref at the same time
* Revert "use structure to return sample count and vref at the same time"
This reverts commit 9cfd1c173cda51495f766a3f678c2202d67725fd.
* Revert "Revert "Introduce "px4_arch_adc_reference_v"""
This reverts commit edb7f7603e4471163ffb0fc6fc62ad2e30336e91.
* fix missed reference
* remove unecessary channel specific vref
* Update src/drivers/drv_adc.h
Co-Authored-By: David Sidrane <David.Sidrane@Nscdg.com>
* Update src/drivers/drv_adc.h
Co-Authored-By: David Sidrane <David.Sidrane@Nscdg.com>
* Introduce BOARD_ADC_POS_REF_V
Co-authored-by: David Sidrane <David.Sidrane@Nscdg.com>
- reduces amount of board configuration required
- removes the cyclic dependency between io_timers_t and timer_io_channels_t
Fixes a bug in the fmuk66-v3 config: the 2. timer has 3 channels associated
not 2.
Fixes a bug in the modelai config: the 2. timer has 4 channels associated.
- nuttx in PX4/Firmware (4b356c91f2be41dfdadb38270fab01ddb337d3c7): 7b36108b54
- nuttx current upstream: fdf1837077
- Changes: 7b36108b54...fdf1837077
fdf1837077 2020-02-07 Peter van der Perk - [BACKPORT] S32K add support for Nxp drone boards (#224)
f479b26c98 2020-02-07 Peter van der Perk - [BACKPORT] imxrt added missing i2c prescale mask
26dd187034 2020-02-07 Peter van der Perk - [BACKPORT] Kinetis renamed TJA1100 to TJA110X registers
The bulk of this change was tightly coupled and needed to be deleted in one pass. Some of the smaller changes were things that broke as a result of the initial purge and subsequently fixed by further eradicating unnecessary platform differences. Finally, I deleted any dead code I came across in the related files I touched while going through everything.
- DriverFramework (src/lib/DriverFramework submodule) completely removed
- added dspal submodule in qurt platform (was brought in via DriverFramework)
- all df wrapper drivers removed
- all boards using df wrapper drivers updated to use in tree equivalents
- unused empty arch/board.h on posix and qurt removed
- unused IOCTLs removed (pub block, priv, etc)
- Integrator delete methods only used from df wrapper drivers
- commander: sensor calibration use "NuttX version" everywhere for now
- sensors: update to px4_{open, read, close} instead of DevMgr wrapper (adc open for analog differential pressure)
- battery_status: update to px4_{open, read, close} instead of DevMgr wrapper (adc open for analog differential pressure)
- cdev cleanup conflicting typedefs and names with actual OS (pollevent_t, etc)
- load_mon and top remove from linux boards (unused)
- delete unused PX4_MAIN_FUNCTION
- delete unused getreg32 macro
- delete unused SIOCDEVPRIVATE define
- named each platform tasks consistently
- posix list_devices and list_topics removed (list_files now shows all virtual files)
- instrumenting PX4 Matrix and Param methods is too burdensome
- partially restore px4_fmu-v5_stackcheck and holybro_durandal-v1_stackcheck to match default configs
- nuttx in PX4/Firmware (327c7f3672ee5f066ec53dfe1554a02d1aa610da): 2e55ce8ec9
- nuttx current upstream: 9331fda0d7
- Changes: 2e55ce8ec9...9331fda0d7
9331fda0d7 2019-12-10 David Sidrane - [BACKPORT] IMXRT106x USDHC: Support regular GPIO for CD and inversion.
91c80c708b 2019-12-05 David Sidrane - [BACKPORT] imxrt106x:pinout add ALT 8 GPIO_GPT1_CAPTURE[1|2]
32f758f0e9 2019-12-03 David Sidrane - [BACKPORT] stm32f7:Add Serial Tx DMA
Daniel Agar
PX4 BuildBot
Beat Küng
David Sidrane
SalimTerryLi
Julian Oes
Christian Clauss
Matthias Grob