603cd1e6dc
refator events: move temperature calibration implementation into subdirectory
8 years ago
b36e65fd6d
events: Improve consistency of console messages
8 years ago
9e219fba0c
events: make required temp rise for calibration adjustable
8 years ago
4ff5e7c5ab
systemlib
8 years ago
8001db257c
ROMFS: enable auto start of thermal calibration
8 years ago
8aa91512e9
systemlib: Add parameters to control thermal calibration startup behaviour
8 years ago
f86347f1e2
Tools: Enable offline calibrator to handle less than 3 inertial sensors
8 years ago
4d163eebb9
events: Add accelerometer and baro thermal calibration
8 years ago
f0c456dd54
events: give gyro cal unique names in preparation for other sensor types
8 years ago
9e80a6c9d6
sensors: rc filter no unstable cutoff, better initialisation, reset filter on change, constrain output
...
Filter gets unstable if cutoff is above sample rate/2.
Filter initial frequencies do not matter a lot because they get replaced by parameters anyways.
Filter delay values get reset to 0 when the filter is reconfigured otherwise there can be some weird spikes in the output.
Filter output gets constrained to the range again because of possible overshoot.
8 years ago
81dcba3a2a
sensors: rc added low pass filter parameters
8 years ago
c2be4b2b29
mc_pos_control: added exponential curve to manual x,y velocity setpoint
...
controlled by parameter MPC_XY_MAN_EXPO that is disabled (0) by default
8 years ago
661832ca1d
mathlib: added exponential curve function
8 years ago
d991285406
sensors: rc filter: added sample rate of 33.3Hz and lowpass cutoff 5Hz hardcoded for testing
8 years ago
27a4ce2691
sensors: rc added lowpass filters to the 4 main channels without useful samplerate and cutoff frequency yet
8 years ago
a14dbdcfdb
sensors: rc refactored min max ifs to constrain
8 years ago
9527dd7714
Add auav-x21_default to the qgc firmware for distribution
8 years ago
3dc6e7b574
LandDetector: use a 64bit counter for total system flight time
...
The previous 32bit counter wrapped in ~1.19h, this switches to 2 32bit
counters, wrapping in 584942 years.
8 years ago
05b649cc86
LandDetector: fix total system flight time (landed & takeoff logic)
8 years ago
f718b3a97a
mc_pos_control: limit slewrate different in up and down direction
8 years ago
c976a26156
Use wild card *_PX4_* for upload
...
Compliments the Bootloader change To simplify the ripple effect on the tools, we will be using /dev/serial/by-id/*_PX4_* to locate PX4 devices. Therefore moving forward all Bootloaders must contain the prefix "PX4 BL " in the USBDEVICESTRING
8 years ago
0eac637870
clang-tidy relax function-size.LineThreshold
8 years ago
9a2ce9a098
clang-tidy relax function-size.StatementThreshold
8 years ago
b068c61784
clang-tidy clang-analyzer-core.NonNullParamChecker
8 years ago
345123bb04
clang-tidy readability-static-definition-in-anonymous-namespace
8 years ago
b59ab8b663
clang-tidy remove TODOs
...
- readability-avoid-const-params-in-decls
- readability-named-parameter
8 years ago
6f05fec335
clang-tidy performance-unnecessary-copy-initialization
8 years ago
7e5f09f408
clang-tidy performance-unnecessary-value-param
8 years ago
be5764db48
clang-tidy misc-suspicious-missing-comma
8 years ago
edd564b5a9
clang-tidy list all available checks
8 years ago
37a2e331c4
clang-tidy test_bson memcmp check return
8 years ago
070cd55636
clang-tidy readability
8 years ago
b33d49c77d
state_machine_helper use static_assert
8 years ago
4e3b4091e8
run-clang-tidy only display output on error
8 years ago
226148ea8b
import llvm 4.0 run-clang-tidy.py
8 years ago
ca09f8a107
uORBDevices use global read with stdin int
8 years ago
73da6d30d9
clang-tidy errors cause target failure
8 years ago
96e51f7c59
clang-tidy remove redundant
8 years ago
6631e72d6f
clang-tidy modernize-redundant-void-arg
8 years ago
e927f3e040
clang-tidy modernize-use-nullptr
8 years ago
ec2467d4a5
MPC controller: Do not initialize to zero dt but a likely default dt
8 years ago
299c40f627
mc_pos_control: timestamp fix for vel_sp
8 years ago
a66a25b884
sdlog2_dump.py skip unknown message type
8 years ago
80c348d3b0
temperature_compensation: fix return value for set_sensor_id
...
got dropped during rebase cleanup
8 years ago
c07fd1a360
mc_att_control_main: fix style
8 years ago
4f6e379e50
temperature_compensation: use const for reference
8 years ago
7d8ce9ab9c
sensors: Fix bug in temperature offset calculation
8 years ago
c0fd3afc8c
accelerometer_calibration: only notify system once (after last scale change)
8 years ago
998a407148
SITL: better formatting of help output
8 years ago
0a447e9a93
Tools: update instructions for off-board calibrator
8 years ago
Beat Küng
Paul Riseborough
Matthias Grob
David Sidrane
Dennis Mannhart
Daniel Agar
Lorenz Meier
Bart Slinger