- matrix in PX4/Firmware (18f14ebefad29873ddeef6396c7c3a728c90b996): 2bee0d078c
- matrix current upstream: 674bd99f3b
- Changes: 2bee0d078c...674bd99f3b674bd99 2020-06-11 kamilritz - Add operator* and operator/ for slice with type
38b3acc 2020-06-11 Nicolas MARTIN - fix conjugate_inversed comment
A parameter spcifies what the redundancy level for 5V rail supply
needs to be and a check makes sure that it's available before
taking off such that the user is aware of a broken or disconnected
redundant power module.
- ecl in PX4/Firmware (af11fa456d7282e324d662a452c71ae85ee59d9b): b3dc06d0cb
- ecl current upstream: 38cbd1a182
- Changes: b3dc06d0cb...38cbd1a18238cbd1a 2020-06-09 Matthias Grob - AlphaFilter: prevent setParameters division by zero
b7d54b5 2020-06-04 RomanBapst - gps: fixed filter initialization bug around gps - do not gps reference altitude to zero in case gps checks pass before the filter initialized - reset the filtered gps position and position derivative filters in case we are in air or there is movement on the ground
8f533cb 2020-06-03 bresch - terrain_estimator: fix sensor aid selection
821e1fa 2020-06-03 bresch - terrain_estimator: add unit tests
aa96fa6 2020-06-03 bresch - Random style fixes in the code
5d6a72e 2020-06-03 bresch - sensor_simulator: add possibility to set GPS position rate
Minimum requirement to use: set IMU_GYRO_RATEMAX to 400.
Logging rate of a single topic: ~85 KB/s. If multiple should be logged,
a really good SD card has to be used.
- sitl_gazebo in PX4/Firmware (39a33a35ae): 20e8dbe115
- sitl_gazebo current upstream: 3ba325b00f
- Changes: 20e8dbe115...3ba325b00f
3ba325b 2020-06-03 Julian Oes - geotagged_images: actually report number of images
92453d1 2020-05-21 JaeyoungLim - Cleanup
9aef888 2020-05-21 JaeyoungLim - Translate yaw to point at the right direction
- at start perform full sensor signal path reset and wait for max time
- issue full sensor reset on any error
- only allocate DRDY perf counter if GPIO is available
- allow running faster than accel ODR (safe limit of 2 kHz in place)
- perform full sensor signal path reset and wait for max time (100 ms)
- issue full sensor reset on any error
- always read FIFO count before transfersj
- only allocate drdy perf counter if GPIO is available
- perform full sensor signal path reset and wait for max time (100 ms)
- issue full sensor reset on any error
- always read FIFO count before transfersj
- only allocate drdy perf counter if GPIO is available
Matthias Grob
bresch
dino
Jonathan Hahn
JaeyoungLim
PX4 BuildBot
CUAVcaijie
Beat Küng
Daniel Agar
Julian Oes
Ricardo Marques
Mirko Denecke
David Sidrane
RomanBapst