2c31671cc2
FW SITL enable FW EKF2 default parameters
7 years ago
7830d3503e
posix sitl standard_vtol lower MPC_THR_MIN
7 years ago
df3a3daa0f
start wind estimator for relevant platforms
...
Signed-off-by: Roman <bapstroman@gmail.com>
7 years ago
2c0436c37c
sitl tiltrotor config: front transition throttle parameter name change
...
Signed-off-by: Roman <bapstroman@gmail.com>
7 years ago
8f71633516
sitl configs: updated VT_TRANS_THR parameter name change
...
Signed-off-by: Roman <bapstroman@gmail.com>
7 years ago
38f5f60a1e
pwm_out_sim cleanup
...
- move to ModuleBase
- strip down to PWM 8 and 16 modes only
- remove all dead code
- implement missing pwm ioctls (current value, rates, etc)
- default rate 50Hz -> 400Hz
7 years ago
159834ce1b
posix-configs: set tiltrotor transition parameters
...
Signed-off-by: Roman <bapstroman@gmail.com>
7 years ago
2886fe8da3
posix-configs: added sitl startup script for gazebo quad tiltrotor model
...
Signed-off-by: Roman <bapstroman@gmail.com>
7 years ago
8ec1fb9999
ROMFS: added mixer for tailsitter simulation
...
- simulated tailsitter needs a virtual elevator since we cannot simulate
elevons yet (liftDrag plugin does not model longitudinal moment Cm)
Signed-off-by: Roman <bapstroman@gmail.com>
7 years ago
305859f356
disable power module ( #8804 )
...
- currently doesn't work on all boards...
7 years ago
cf79be1559
sitl ekf2 config: add vision position estimate
7 years ago
a329fd4c76
SITL configs: set SDLOG_DIRS_MAX to 7
...
Avoids ending up with huge log directories.
plus some param alphabetic reordering
7 years ago
0e65753568
Iris: set mixer to quad_wide
...
The geometry was previously quad_deadcat in which front motors are closer to CG and thus more loaded in hover.
quad_wide is the same geometry as quad_deadcat except the CG is centered so all motors are loaded equally.
Flight logs on IRIS with deadcat mixer showed that
- all motors are equally loaded during hover (actuator_outputs 0 to 3 have similar values)
- a negative pitch offset is building up soon after takeoff (visible in actuator_controls)
7 years ago
18b83f2960
eagle posix-config: add sleep after muorb
...
without this param set doesn't work -> adsp side never receives changes
7 years ago
1d59d89282
posix-config iris_replay: log until SITL exits
...
If a log with multiple (dis)arming events was replayed, multiple logs were
created. This changes the replay to only create a single log.
7 years ago
f600cfbb9f
Add support for testing precision landing in SITL simulation
7 years ago
856a523d29
add snapdragon power module (ltc2946) to eagle flight
7 years ago
2fab183731
posix-configs: use linux_sbus on ocpoc
7 years ago
07ae1e4044
posix-configs: attitude quaternion for DroneCore
...
DroneCore uses the attitude quaternion, and not the attitude
Euler angles.
7 years ago
2837870733
posix-configs: send gimbal attitude to mavros port
...
The gimbal attitude is required by DroneCore.
7 years ago
1e91b8cd32
posix-configs: send gimbal attitude over mavlink
7 years ago
d1500dca6f
df_hmc5883_wrapper: set mag device path from input argument ( #8079 )
7 years ago
af9690cf08
add simple posix tests to SITL
7 years ago
ebd2acfc43
posix-configs: enable ftp for all mavlink instances
7 years ago
3498fe0c6f
delete sdlog2 EKF2 replay ( #7982 )
7 years ago
5352cffe3f
Changing Names
8 years ago
e1eceda5f2
Change start up script
...
Now the start up script starts a GPS simulator as well as the ekf in order
to estimate position and orientation
8 years ago
af58ccf173
Adding launch file to lpe folder
8 years ago
989b1484cc
HippoCampus AUV: Enable start without ROS wrappers
8 years ago
4ce803b321
Update LPE init script.
8 years ago
0ae76aff32
updated to use rc driver from PX4, instead of from FC addons ( #7798 )
...
* updated to use rc driver from PX4, instead of from FC addons
* fixed format
* update per comments
* fix format
* fix format
* remove duplicated __PX4_QURT
8 years ago
07619cf723
Make NuttX drivers cross platform (VDev -> CDev)
8 years ago
0f8f5d29be
Enable Simulation of the Hippocampus (AUV from TUHH)
...
Adding files which enable a simulation with the autonomous underwater
vehicle (AUV) from the Technical University Hamburg-Harburg
8 years ago
c81dd46b02
land detector VTOL inherit MC maybe_landed ( #7738 )
...
* maybe_landed state for VTOL inherited from MC
* set correct land detector for SITL
8 years ago
556eb9e45a
fix the bug for posix_sitl_inav
8 years ago
7612b94c72
Allow relaying from same system ID or with target component 0
8 years ago
8bc0a8aece
Geotagging config: Default vehicle to MAVLink 2
8 years ago
b1a987f06b
Enable camera triggering and gimbal control via MAVLink
8 years ago
a63699060d
ekf2: use ModuleBase & add module documentation
8 years ago
bf11362dae
i2c_posix: fix use of wrong device path
...
previously, get_devname() was used as the I2C device path, but on NuttX,
get_devname() is the device file which the driver creates. This patch
changes it, so the sematics are the same as on NuttX: both now use _bus
to decide to which I2C bus device to talk to.
I did not see any other use-cases than the led on ocpoc.
8 years ago
fc4affbb5f
ocpoc_mmap_pwm_out: remove this driver, it's in linux_pwm_out now
8 years ago
8527c8276f
drivers: rename rpi_pwm_out to linux_pwm_out
8 years ago
d3f76262da
RPI px4_no_shield.config: add documentation for connected HW
8 years ago
243ae00e4e
rpi_pca9685_pwm_out: remove this driver, it's now in rpi_pwm_out
8 years ago
723f67b39a
refactor navio_sysfs_pwm_out: rename to rpi_pwm_out
8 years ago
0340f96ad0
Rename px4_rpi.config to px4_no_shield.config
8 years ago
6a9aa60ad7
Add rpi_pca9685_pwm_out command
8 years ago
78b853431d
change gps command
8 years ago
6ee6165592
PX4 RASPBERRY PI CONFIG
8 years ago
add78a4b04
stream distance sensor at 10Hz for SITL-EKF testing
8 years ago
Daniel Agar
Roman
ChristophTobler
ChristophTobler
Beat Küng
Julien Lecoeur
ChristophTobler
Nicolas de Palezieux
davidaroyer
Julian Oes
NRottmann
James Goppert
Larry Wang
Sander Smeets
stmoon
Lorenz Meier
crossa