px4_autopilot

Commit Graph

Author	SHA1	Message	Date
Julian Kent	e847ef1a4d	Add trig tests for wind calculations, and fix bugs / edge cases	4 years ago
Julian Kent	7482413005	Add Range-based RTL	4 years ago
Ricardo Marques	e817fb83f5	pwm_extra: Add PWM_EXTRA parameters. Signed-off-by: Ricardo Marques <marques.ricardo17@gmail.com>	4 years ago
Ricardo Marques	7a8203bf19	Enable third mixer when using UAVCAN for main mixer.	4 years ago
Matthias Grob	02c0f08060	flashfs: fix alignment ambiguity Instead of ignoring the warnings. Thanks to @Ole2mail and @yuhaim for the suggestions.	4 years ago
TSC21	920d6d84b5	rtps: increase non-alias ID range by reducing the alias space ID	4 years ago
TSC21	54486b995e	uorb_rtps_message_ids: add required topics to enable offboard control from DDS	4 years ago
Daniel Agar	dab90f86a4	drivers/gps: limit to ublox only flash constrained targets	4 years ago
Ricardo Marques	78c05275d2	tailsitter: Fix differential thrust in FW mode. Signed-off-by: Ricardo Marques <marques.ricardo17@gmail.com>	4 years ago
Daniel Agar	e4d223f098	boards: CUAV Nora fix BMI088 orientation	4 years ago
Daniel Agar	1ec10bfcc6	boards: disable CONFIG_ARMV7M_LAZYFPU again (#16573 ) - this was causing hard faults on the CUAV Nora and possibly other boards, disabling everywhere until we fully understand the root cause	4 years ago
Daniel Agar	3abe2e82d1	mpu9250: create dedicated i2c version and delete legacy driver - update crazyflie and bbblue usage - eventually this should be merged with the SPI version after interface changes are made	4 years ago
Daniel Agar	c9a7894230	boards: bitcraze crazyflie fix boot - add console to USART3 for now	4 years ago
David Jablonski	2ed48f041c	mavlink: Templated SCALED_IMU mavlink stream	4 years ago
Matthias Grob	031bbb7f3e	FlightModeManager: handle commands all the time Moving the command handling to a separate function that gets called whenever a vehicle command is available to always react on commands and not just when already a task is running. This solves e.g. commanding an Orbit when in Staibilized.	4 years ago
Matthias Grob	df54f938ef	FlightModeManager: correct setpoint struct initialization It is important that setpoints get initialized with NAN and not overwritten if specifically set by a successful flight task execution. It's then clear if any setpoints were intentionally and successfully set. Crucial for the position controller's emergency failsafe and the seamless setpoint handover to the next flight task.	4 years ago
Matthias Grob	63db61a700	FlightModeManager: correct acceleration setpoint feedback naming The variable was never renamed correctly in this in between layer when we switched from normalized thrust to acceleration setpoints.	4 years ago
Daniel Agar	4d7b875ee2	flight_mode_manager: merge with flight_tasks	4 years ago
RomanBapst	b1e442b830	vehicle_local_position: added bitfield for terrain estimate sensor info - indicate how the distance to the bottom is estimated as this is important to know in the context Signed-off-by: RomanBapst <bapstroman@gmail.com>	4 years ago
bresch	eaa2ae9dc9	ekf2: add param to enable synthetic mag Z fusion mode	4 years ago
bresch	983234e29d	ekf2: add param to set rng check hysteresis	4 years ago
Silvan Fuhrer	195a900ecf	change default of RTL_LAND_DELAY to 0 Signed-off-by: Silvan Fuhrer <silvan@auterion.com>	4 years ago
Silvan Fuhrer	037c821142	ROMFS: increase max distance between waypoints for VTOL and FW to 5km Signed-off-by: Silvan Fuhrer <silvan@auterion.com>	4 years ago
JacobCrabill	8e8497ff77	heater: px4io: Add support for heaters on IO MCU	4 years ago
Jaeyoung-Lim	653fef56de	Update sitl_gazebo	4 years ago
Jaeyoung-Lim	af1b4c473e	Start user camera plugin This commit starts the gazebo_user_camera_plugin together with the gzclient, so that it is always following the vehicle	4 years ago
Matthias Grob	8a7878f65c	arch.sh: update zsh support, latest ARM GCC, gazebo AUR	4 years ago
Silvan Fuhrer	cee4016665	Preflight checks: Airspeed checks update -check for valid airspeed_validated (declared valid plus updated less than 1s ago) -added param (COM_ARM_ARSP_EN) to enable/disable check for max airspeed for arming set max airspeed limit to half of stall airspeed Signed-off-by: Silvan Fuhrer <silvan@auterion.com>	4 years ago
Can Berk Durmus	ba9611621d	Retune Typhoon H480 PID	4 years ago
David Sidrane	1c0ed74d6a	platforms/nuttx/NuttX/nuttx net backports	4 years ago
Beat Küng	ade3871bee	adc: add support for multiple sensor voltage channels	4 years ago
Beat Küng	e2337a34eb	system_power: add comp_5v_valid and can1_gps1_5v_valid And fill it in from the v5x GPIO expander.	4 years ago
Beat Küng	704a82aaa6	gpio: extend support for /dev/gp* GPIO's Note that there's a small CLI interface change.	4 years ago
Beat Küng	88fe047556	px4/v5x: enable mcp23009 GPIO driver	4 years ago
Beat Küng	3e4b8763a5	nuttx: add mcp23009 gpio driver	4 years ago
Beat Küng	e1983381e7	rcS: add SYS_PARAM_VER to param reset_all exception list Avoids an extra reboot when resetting the airframe	4 years ago
Matej Frančeškin	ba6a8080ea	mavlink: don't respond to MAV_CMD_REQUEST_MESSAGE if component doesn't match PX4 is responding with NACK to MAV_CMD_REQUEST_MESSAGE from a GCS to payload-manager which confuses a GCS. PX4 shouldn't respond to commands that are not broadcasted or specificaly addressed to it.	4 years ago
Beat Küng	26e8c231b0	v5x,v6x: move mtd_caldata after mtd_id partition to avoid losing factory calibration params on existing setups	4 years ago
Lorenz Meier	a282f3df8d	CLI test: Disable by default on NuttX First target is to enable this for POSIX tests and then later to roll them out to NuttX.	4 years ago
Lorenz Meier	03e9e10847	Add CLI tests for basic soak testing This is in no way a complete test suite but is intended as a starting point to get minimal test coverage for CLI handling tests in. This is necessary to QA the CLI handling (e.g. removal of commands) and to ensure that we are exercising these code paths in stack check and alike tests.	4 years ago
Julian Oes	5ae5c03c66	mavlink: handle param4/5 from mission_item_int It turns out that we did not properly handle param4 and param5 if they are transferred using mission_item_int if the frame is MAV_FRAME_MISSION.	4 years ago
Beat Küng	12ebbd995d	bmp388: wait a bit longer to schedule first cycle after reset	4 years ago
Beat Küng	529c3112ac	bmp388: quiet if startup fails (no sensor on bus)	4 years ago
David Sidrane	1e7dfe227a	stm32_common:board_hw_rev_ver Use Analog resistor detection When the VER_DRIVE and REV_DRIVE are the same GPIO we need to use Analog detection.	4 years ago
Jakub Kákona	b87dd317d4	airframes: add new airframe for ThunderFly TF-G2 autogyro (#16551 ) Co-authored-by: Roman Dvorak <romandvorak@mlab.cz>	4 years ago
Thomas	df41c99b61	make failsafe handling consistent over all VTOL types	4 years ago
Thomas	38e46ff341	Rename VtolAttitudeControl::abort_front_transition(const char reason) to VtolAttitudeControl::quadchute(const char reason)	4 years ago
Thomas Stauber	40fbfdc054	Undo make format change Co-authored-by: Matthias Grob <maetugr@gmail.com>	4 years ago
Thomas	83ddb77a5f	delete excess empty lines	4 years ago
Thomas	b90fafd5cd	Fix quadchute logic so that it also works during back transition	4 years ago

1 2 3 4 5 ...

34202 Commits (65884960fa20b86f4fc8a98dd8ac16382fa1f3e1) All Branches Search

34202 Commits (65884960fa20b86f4fc8a98dd8ac16382fa1f3e1)

All Branches