px4_autopilot

Commit Graph

Author	SHA1	Message	Date
ShiauweiZhao	686bcff8a7	new TDK ICM42670p IMU driver support (#18141 ) Co-authored-by: zhaoxiaowei <zhaoxiaowei@efy-tech.com>	3 years ago
Daniel Agar	000765e9f0	NuttX mount procfs and binfs in px4 init	3 years ago
Daniel Agar	29a91306b5	lib/led: error if dropping ORB_ID(led_control) messages	3 years ago
Daniel Agar	5c7882b787	icm42688p: properly disable anti-aliasing and notch filter	3 years ago
Daniel Agar	4b5a91bf7d	experimental driver for the Tattu 12S 16000mAh Smart Battery on /dev/can0 (#18164 ) - This driver is highly specific to this model of Tattu battery and cannot work with other models without code changes. - The driver simply reads CAN frames using the NuttX CAN character device interface and converts the data into the proper format as specified in the Tattu datasheet Co-authored-by: Jacob Dahl <dahl.jakejacob@gmail.com>	3 years ago
Daniel Agar	5eddf32cd3	boards: cubepilot_cubeorange only start ADSB mavlink if console not present - cubepilot_cubeorange_test has the console enabled (used for test rack and bench debugging)	3 years ago
Sander Swart	dbb0974b0c	Removed TEL3 from cube orange default.cmake as it is used for the built in ADS-B receiver	3 years ago
Sander Swart	bce1c06174	Added new line at the end of the file as per code style	3 years ago
Sander Swart	223410e17a	Enable Cube Orange built in ADS-B receiver by default	3 years ago
Daniel Agar	8c47a190ac	Jenkins: hardware stop sensors module before mirobenchmarks - ignore irrelevant sensor timeouts during microbenchmarks	3 years ago
Daniel Agar	cf0a4e06db	boards: px4_fmu-v5x_test disable unused drivers to save flash	3 years ago
Daniel Agar	560ff42923	boards: px4_fmu-v2_test disable ms4525 to save flash	3 years ago
Daniel Agar	56a8f5f73e	boards: px4_fmu-v2_test disable mc_hover_thrust_estimator to save flash	3 years ago
Daniel Agar	3dda360fac	boards: px4_fmu-v5_optmized disable all additional barometers to save flash	3 years ago
Daniel Agar	476e050000	boards: cubepilot_cubeorange_test disable unused modules to save flash	3 years ago
Beat Küng	291ca246d2	matrix: update submodule (improves matrix inversion)	3 years ago
Beat Küng	73ab153fe0	fix test_microbench_math: don't try to measure single instructions The clock is simply not accurate enough to do that. Plus the measuring overhead is much higher than the executed instruction. Remaining issue: memory transfers (due to volatile) add non-negligible overhead and distort the result. Could be solved by using inline assembly.	3 years ago
Daniel Agar	02ca1a6711	Update submodule mavlink v2.0 to latest Sun Sep 5 12:39:18 UTC 2021	3 years ago
PX4 BuildBot	6278c072c9	Update submodule sitl_gazebo to latest Mon Sep 6 00:40:01 UTC 2021 - sitl_gazebo in PX4/Firmware (51697b0d07665d85ca1ebd9105e3cdc621b41969): `7fda4d311a` - sitl_gazebo current upstream: `53d606b32f` - Changes: `7fda4d311a...53d606b32f` 53d606b 2021-09-01 stmoon - fix the bug for the low real time factor in gazebo	3 years ago
Daniel Agar	a4e9444ca4	Makefile: submodulesupdate include fetching all tags recursively	3 years ago
RomanBapst	93075ad5e8	rtl: fixed computation of return altitude if destination is not home Signed-off-by: RomanBapst <bapstroman@gmail.com>	3 years ago
Jaeyoung-Lim	d32f0d6168	Support headless mode for ignition gazebo This adds support for `HEADLESS=1` when starting ignition gazebo with headless mode	3 years ago
Jaeyoung-Lim	3aa3f542ae	Update simulation-ignition submodule	3 years ago
Jaeyoung-Lim	121bdfa630	Add verbose option for ignition gazebo This commit adds verbose option for ignition gazebo	3 years ago
Jaeyoung-Lim	3c57626627	Update world path for ignition gazebo	3 years ago
xdwgood	c35293107d	tailsitter.cpp:If transition timeout,abort transition	3 years ago
RomanBapst	92abf0545a	GeofenceBreachAvoidance: fixed bug which caused min vertical distance to fence not to be calculated Signed-off-by: RomanBapst <bapstroman@gmail.com>	3 years ago
profff	9418d36cc9	Tools/docker_run.sh: use recent docker image to fix missing python jsonschema when compiling linux arm based targets (#18178 )	3 years ago
Daniel Agar	99d7cf4255	parameters: only warn on invalid parameter import	3 years ago
Daniel Agar	92a48657e3	Jenkins: hardware tolerate listener command failure - these are only for casually inspecting the system	3 years ago
Daniel Agar	86bd6a253b	Jenkins: hardware test rebooting back to back multiple times	3 years ago
Daniel Agar	06c673a94f	Jenkins: hardware move sd_bench to test section	3 years ago
Daniel Agar	478cc576ee	commander: warn on offboard mission init - this could happen because the SD card was formatted	3 years ago
Daniel Agar	347720e049	Jenkins: hardware always reset board when finished	3 years ago
Daniel Agar	e7607b858d	sensors: use vehicle_imu timestamp_sample instead of timestamp	3 years ago
Daniel Agar	45001d1ba4	boards: px4_fmu-v5x_test disable modules to save flash	3 years ago
Daniel Agar	f1d00fe697	Tools/HIL: only print timestamp if newline in output	3 years ago
Daniel Agar	6ee16156bb	Jenkins: hardware only list relevant parameters	3 years ago
Daniel Agar	33a3bc143b	boards: ark_can-gps_debug disable systemcmds to save flash	3 years ago
Daniel Agar	225bd2d5a3	Jenkins: hardware limit stackcheck and debug build cpu usage	3 years ago
Daniel Agar	a5a457d744	sensors: relax default data_validator timeout 20->40ms	3 years ago
Daniel Agar	3ff9295cbd	Jenkins: hardware nxp_fmuk66-v3 limit IMU_GYRO_RATEMAX to save cpu	3 years ago
Daniel Agar	bd8937642f	lib/sensor_calibration: only warn if external rotation resetting - this also happens with the actual default parameter value (-1)	3 years ago
Daniel Agar	40e5477edb	NuttX boards fix mkfatfs and rcS logic	3 years ago
Daniel Agar	65b1a9648d	Tools/HIL/run_nsh_cmd.py: fail if ERROR printed in output	3 years ago
Daniel Agar	2f99857b0a	systemcmds/bl_update: add CONFIG_ARCH_CHIP_STM32F7 file size limit	3 years ago
Daniel Agar	369776cd4e	Jenkins: hardware don't tolerate px4io status on known hardware	3 years ago
Daniel Agar	c6dd03a8aa	Tools/HIL/run_nsh_cmd.py - raise timeout slightly - helps on slower debug builds	3 years ago
Daniel Agar	c508404975	boards/px4/fmu-v4pro: fix incorrectly sized FRAM	3 years ago
Daniel Agar	61931fcbbc	Jenkins: hardware failure allow px4_fmu-v5_debug monitor firmware upload failure - due to reported errors in NuttX low level drivers	3 years ago

1 2 3 4 5 ...

37993 Commits (686bcff8a7b40c6b56f13ed4dd9baf7ece65a2f5) All Branches Search

37993 Commits (686bcff8a7b40c6b56f13ed4dd9baf7ece65a2f5)

All Branches