- nuttx in PX4/Firmware (327c7f3672ee5f066ec53dfe1554a02d1aa610da): 2e55ce8ec9
- nuttx current upstream: 9331fda0d7
- Changes: 2e55ce8ec9...9331fda0d7
9331fda0d7 2019-12-10 David Sidrane - [BACKPORT] IMXRT106x USDHC: Support regular GPIO for CD and inversion.
91c80c708b 2019-12-05 David Sidrane - [BACKPORT] imxrt106x:pinout add ALT 8 GPIO_GPT1_CAPTURE[1|2]
32f758f0e9 2019-12-03 David Sidrane - [BACKPORT] stm32f7:Add Serial Tx DMA
used back in time when no soothing was done to avoid large steps when
the estimator stops sending a maximum velocity (e.g.:GPS gained during
optical flow flight). Since smoothing is applied later, this is not
required anymore.
- matrix in PX4/Firmware (478a27ee8843a9bd91a0254f6b01a6a9c01946a4): a8009a36a3
- matrix current upstream: 4f3565da94
- Changes: a8009a36a3...4f3565da944f3565d 2019-12-09 kritz - Add asserts (#115)
2f63981 2019-12-06 kritz - Add several functions that are useful for coavriance matrices: (#114)
5cbcf60 2019-12-05 kritz - Set Matrix's col amd row to single value (#113)
ef442fa 2019-12-05 kritz - Getter function for the diag elements of slice (#112)
de6a2d3 2019-12-04 kritz - Slice assign value (#111)
This fixes a corner case for VTOL RTL with RTL_TYPE 1.
RTL_TYPE 1 means that the VTOL skips all waypoints on RTL and jumps to
the land waypoint at the end.
During a mission in fixedwing mode it will continue to fly in fixedwing
mode and then do a transition before landing.
However, if RTL is engaged right at the moment of the front transition,
the transition waypoint is not inserted and the VTOL will try to land in
fixedwing mode at the mission land location.
This corner case is fixed in this patch by also considering the
"transition after takeoff" state.
Open the UART after adding the instance: mavlink_open_uart() might block,
and in that case the parent task waiting for mavlink to be started times
out.
And while waiting for the USB UART device to come up:
- check for _task_should_exit
- check for check_requested_subscriptions()
Side-effects when USB is not plugged in during boot:
- reduces boot duration by 100ms
- fixes duplicate instance name in 'top':
201 mavlink_if0 1 0.000 1328/ 2572 100 (100) w:sig 3
204 mavlink_if0 572 4.221 1632/ 2540 100 (100) w:sig 4
- 'mavlink stop-all' now stops the usb instance as well
- uses the FIFO and SPI DMA to transfer full raw data (8 kHz gyro, 4 kHz accel)
- new sensor messages for better visibility
- sensor_{accel, gyro}_fifo: full raw data for optional logging and analysis
- sensor_{accel, gyro}_status: metadata, clipping, etc
- currently not enabled by default
Daniel Agar
PX4 BuildBot
Timothy Scott
Silvan Fuhrer
bresch
Matthias Grob
David Jablonski
David Sidrane
modaltb
Julian Oes
Morten Fyhn Amundsen
Beat Küng
kamilritz
mcsauder
dino