* This allows one to run 'make posix list_vmd_make_targets' and get output like
>make posix list_vmd_make_targets
[...]
-- Build files have been written to:
/usr/src/debian/px4/Firmware/Firmware.git/build_posix_sitl_default
PX4 CONFIG: /usr/src/debian/px4/Firmware/Firmware.git/build_posix_sitl_default
Scanning dependencies of target list_vmd_make_targets
[100%] List of acceptable 'posix_sitl_default' <viewer_model_debugger> targets:
none
none_iris
none_iris_opt_flow
none_tailsitter
[...]
replay_solo_valgrind
replay_typhoon_h480_valgrind
[100%] Built target list_vmd_make_targets
Or, run 'make list_vmd_make_targets' from the build_posix_* directory.
* This adds the list_cmake_targets make target to print all
cmake targets that one can match with PX4_NO_OPTIMIZATION.
PX4_NO_OPTIMIZATION is ignored (do optimization as normal)
when the CONFIG isn't posix_sitl_*.
* Add comment in Makefile on how/where to find all targets.
This allows one to set a semi-colon separated list of regular
expressions in the environment variable PX4_NO_OPTIMIZATION
to control which (cmake generated) targets should be compiled
without optimization.
Suppressing optimization can be necessary for debugging in
a debugger, especially when trying to step through the code
or needing to print variables that otherwise are optimized out.
EXAMPLE
export PX4_NO_OPTIMIZATION="px4;^modules__uORB;^modules__systemlib$"
will result in the following messages during cmake configuration:
[...]
-- Disabling optimization for target 'platforms__posix__px4_layer'
because it matches the regexp 'px4' in env var PX4_NO_OPTIMIZATION
-- Disabling optimization for target 'modules__systemlib' because it
matches the regexp '^modules__systemlib$' in env var PX4_NO_OPTIMIZATION
-- Disabling optimization for target 'modules__uORB' because it matches
the regexp '^modules__uORB' in env var PX4_NO_OPTIMIZATION
-- Disabling optimization for target 'examples__px4_simple_app' because
it matches the regexp 'px4' in env var PX4_NO_OPTIMIZATION
-- Disabling optimization for target 'modules__uORB__uORB_tests' because
it matches the regexp '^modules__uORB' in env var PX4_NO_OPTIMIZATION
-- Disabling optimization for target 'px4' because it matches the regexp
'px4' in env var PX4_NO_OPTIMIZATION
Note that a list of all (currently used) target names can be printed
with the following command line from within the required build directory:
find . -wholename '*/CMakeFiles/*.dir/flags.make' | xargs dirname | xargs basename -a | sort -u | sed -e 's/.dir$//'
While the config_sitl_rcS_dir is used more extensively (and actually
only depending on the base cmake target), the variables
config_sitl_viewer and config_sitl_debugger are just used to be
passed on for the run_config target; config_sitl_debugger is even
*always* 'disable'. Hence, they don't really need to be cached
(INTERNAL or not). Before this patch FILEPATH was used instead
of INTERNAL, but I doubt very much that that was intended. That
only makes sense when cmake-gui would be used and then would pop-up
a file browser to let the user pick a file (while really they
need to pick a directory, so it's wrong either way).
The ONLY reason caching would be used is when a developer edits
the build_posix_sitl_*/CMakeCache.txt files, changes these values
and then runs cmake in the build directory again, now overriding
the values intended here. Nevertheless, I left in the caching.
The main change in this commit (that theoretically has no real effect)
is that I removed the duplicated maintenance of
posix_sitl_broadcast.cmake. When that file was added, it was an
exact copy of posix_sitl_default.cmake and is since not always
maintained to remain the same. I don't think that difference is
in anyway relevant for the broadcasting part though.
Note that I think that something like that also holds for the
posix_sitl_replay.cmake; it would be a lot better - maintenance-wise
- when it was just derived from (or the same as) posix_sitl_default,
I think.
Over time I made a few changes unrelated to what I'm really working on.
These changes are hereby committed first. The bug fixes are related to
what I'm doing in that I need them to be fixed for future commits.
Tools/sitl_run.sh: rename label to rcS_dir and fix usage help.
cmake/common/px4_base.cmake: Remove the check on OUT_UNPARSED_ARGUMENTS,
and a few typos and indentation issues.
cmake/configs/posix_sitl_replay.cmake: Set the correct variable
(config_sitl_rcS_dir) to the correct directory.
cmake/nuttx/px4_impl_nuttx.cmake: typos and indentation issues,
and removal of a redundant FORCE (INTERNAL implies FORCE).
cmake/posix/px4_impl_posix.cmake: typos and indentation issues.
cmake/qurt/px4_impl_qurt.cmake: typos and indentation issues.
src/modules/mavlink/mavlink_ftp.cpp : possible strict-aliasing breakage.
NOTES
The second argument passed to sitl_run.sh is the value of
config_sitl_rcS_dir. This fact is missing from the usage help.
I renamed 'label' to 'rcS_dir' to better reflect this.
Also, for the 'replay' config the wrong variable was set causing
the call to sitl_run.sh to skip an argument and fail (ie the
debugger was passed as rcS_dir and so on).
The check on OUT_UNPARSED_ARGUMENTS in px4_parse_function_args
basically causes every passed IN variable to be REQUIRED and is
therefore a bug. The test for the presence of the REQUIRED arguments
follows directly after and is sufficient for this job. This bug went
unnoticed because currently every argument to OPTIONS, ONE_VALUE,
and MULTI_VALUE is actually passed to the function(s) calling
px4_parse_function_args (them being REQUIRED or not).
The changes in mavlink_ftp.cpp are to avoid a possible aliasing bug
and (mostly) to avoid the compiler warning/error: dereferencing type-
punned pointer will break strict-aliasing rules [-Werror=strict-aliasing].
MavLink spec implementation
implemented vehicle_roi topic
rename old gimbal to rc_gimbal
little changes
corrected RC Gimbal group
Starting ROI implementation in commander
implementation done, needs to be tested
uhm..
add todo
Change to float32 for x,y and z
remove mission topic again, not needed
change roi coordinates to lat, lon and alt
adjust to float64
starting mount implementation
correcting small mistakes, compiles now
add todos
further progress
implementing parameters
adjust default parameters
started implementation of mavlink
fix typo
change to lat, lon and alt
fix typo :D
change to double (to represent float64)
add global_position_
add mount topic
commander mount implementation done
cleanup
almost finished
little fix
codestyle fixes
leave pitch at 0 degrees
added pitch calculation
codestyle changes
Undo vehicle_mount, react to updated parameters, parsing of CMD_DO_MOUNT_* in mount.cpp
start implementing mode override
forgot a semikolon.
add debug
Finish implementation of mount override and manual control.
fix codestyle
correct cleanup
rename to vmount
works now
fix rebase error
fix polling
refactoring and custom airframe for gimbal
couple changes
remove warnx
almost done
finally
What is going on?
change back to actuator_controls_2
working
bump parameter version number and some clarification
fix submodules
Fix build error
Capitalization mistake for headers
Non-Mac compiler issue
Baudrate for crazyflie nrf and fix code style
Save space
Cleanup mpu9250 driver
Working crazyflie firmware build
* Console on USART3
* Could not disable building PX4IO firmware, currently commented out
Don't build PX4IO firmware if the board doesn't ask for it
Added crazyflie motor driver
Fixed wrong register
CLK_SEL is in PWR_MGMT_1
Initial I2C/SPI MPU9250 device
* Tested with I2C
* Need to add error checking
* Intermittent crash on stop call
Working ak8963 mag driver
Functional lps25h driver. Work in progress.
Works well enough to probe and allow sensors task to start.
Added serial port test module
HACK! Get sensors module working
Set crazyflie PWM range
Extend baudrate for Crazyflie's NRF radio
Added dummy tone alarm to allow for init
Added autostart script for Crazyflie
this lets a user select what msgs should be compiled for his project
Care must be taken though, to compile all orb_topcis that are required by the Rest of the Code.
Otherwise many compile errors will occur.
This commits adds by default the ./msg include path to reference to other msgs.
if an exisiting msg is used in another msg.
* Low impact changes from path_cleanup branch.
This is a step towards minimizing the diff with path_cleanup branch.
* Update ecl.
* Revert matrix update.
* Revert ecl and matrix.
* Update sitl gazebo.
* Revert sitl_gazebo and matrix changes.
The reason for this change is that RPi2 and RPi3 are compatible, and
hopefully all differences coming up can be resolved without ifdefs but
at runtime.
Dennis Shtatnov
Carlo Wood
Lorenz Meier
Michael Schaeuble
Beat Küng
Leon
Tim Dyer
Lorenz Meier
mazahner
James Goppert
Hidenori
David Sidrane
Vasily Evseenko
James Goppert
Julian Oes
Henry Zhang