- Append signature in the end of the signee
- Add parameters for output file and rd certificate
- Add a default test key
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
- control allocation module with multirotor, VTOL standard, and tiltrotor support
- angular_velocity_controller
- See https://github.com/PX4/PX4-Autopilot/pull/13351 for details
Co-authored-by: Silvan Fuhrer <silvan@auterion.com>
Co-authored-by: Roman Bapst <bapstroman@gmail.com>
* Update launch files to support multi-video stream in SITL
* Pass extra args to jinja_gen.py inside gazebo_sitl_multiple_run.sh to enable multi-video streaming
The windowed mode has been added for Windows targets originally. It gets very often incorrectly detected and slows down flashing considerably. This even applies to serial links. We are disabling it now in most circumstances.
- sitl_gazebo in PX4/Firmware (5868463d06): 563f0876a5
- sitl_gazebo current upstream: 4043287bbe
- Changes: 563f0876a5...4043287bbe
4043287 2020-12-20 Silvan Fuhrer - tiltrotor: increase wing area to 0.5 per side (#678)
f004811 2020-12-20 JaeyoungLim - Update mavsdk version for SITL tests (#673)
- sitl_gazebo in PX4/Firmware (90f61c2f9a): 19981d61cf
- sitl_gazebo current upstream: 563f0876a5
- Changes: 19981d61cf...563f0876a5
563f087 2020-12-17 JaeyoungLim - Fix tiltrotor model (#675)
0e2d63a 2020-12-17 JaeyoungLim - Fix wind transmormations for motor model (#674)
e5d0d65 2020-12-13 JaeyoungLim - Update container versions for tests (#672)
bccb487 2020-12-12 BazookaJoe1900 - mavlink_interface: rename serial link related function to include 'serial' (#670)
This commit removes the readarray command from the Tools/sitl_run.sh.
This fixes the issue where SITL was not able to run due to readarray not being available on macOS
* Add typhoon h480 support to gazebo multiple sim
This commit adds support for the typhoon_h480 model for the
gazebo_sitl_multiple_run.sh script.
* Update sitl_gazebo to latest version
- switch to python3
- run_nsh_cmd.py return error if command fails
- decrease timeout in checking for output
- Jenkins hardware tests tolerate certain command failures that aren't available on all boards (flash constrained, etc)
- sitl_gazebo in PX4/Firmware (79ad5eab34b76fbe54c2056974230a122362a62f): 487f6283f4
- sitl_gazebo current upstream: ee7661eeab
- Changes: 487f6283f4...ee7661eeab
ee7661e 2020-11-06 Julian Oes - cmake: don't link to protobuf
- ekf2 can now run in multi-instance mode (currently up to 9 instances)
- in multi mode all estimates are published to alternate topics (eg estimator_attitude instead of vehicle_attitude)
- new ekf2 selector runs in multi-instance mode to monitor and compare all instances, selecting a primary (eg N x estimator_attitude => vehicle_attitude)
- sensors module accel & gyro inconsistency checks are now relative to the mean of all instances, rather than the current primary (when active ekf2 selector is responsible for choosing primary accel & gyro)
- existing consumers of estimator_status must check estimator_selector_status to select current primary instance status
- ekf2 single instance mode is still fully supported and the default
Co-authored-by: Paul Riseborough <gncsolns@gmail.com>
Jukka Laitinen
dino
PX4 BuildBot
Daniel Agar
Hamish Willee
Julien Lecoeur
Jaeyoung-Lim
Matthias Grob
David Sidrane
Nicolas de Palezieux
Mohamed Abdelkader Zahana
Lorenz Meier
Ramón Hernán Roche Quintana
Sander Swart
bbworld1
SalimTerryLi
Martin Povišer