px4_autopilot

Commit Graph

Author	SHA1	Message	Date
Daniel Agar	d5c7e243a9	vehicle_command: increase queue depth 4 -> 8 - prevent slower modules from missing commands	4 years ago
Daniel Agar	350ebf5a1f	boards: CUAV CAN GPS flash based parameters	4 years ago
bazooka joe	f45b67af59	re-add boolean attribute to the parameters xml and small cleanup, make Volatile as bool in the internal variable	4 years ago
Daniel Agar	39ef2fd0b7	delete unused struct pwm_output_rc_config	4 years ago
Daniel Agar	75f02d64b6	delete unused PWM_SERVO_SET_SBUS_RATE	4 years ago
Daniel Agar	2b0a047f0c	delete unused DSM_BIND_POWER_UP	4 years ago
Daniel Agar	439c573242	delete unused PWM_SERVO_SET_TRIM_PWM	4 years ago
Daniel Agar	2ff69a4456	delete unused PWM_SERVO_SET_COUNT	4 years ago
Daniel Duecker	f9e07337f8	fix submarine sitl: indicate motor channel range 0..1 or -1..1 in simulation_mavlink.cpp (#16637 ) change motor_count variable to 'pos_thrust_motor_count' This is more specific to what is actually happening in the code. 'pos_thrust_motors_count' indicates number of motor channels which are configured with 0..1 range (positive thrust) all other motors are configured for -1..1 range submarine only have motors with -1..1 range. Thus, pos_thrust_motor_count = 0 Co-authored-by: Thies Lennart Alff <33184858+lennartalff@users.noreply.github.com>	4 years ago
David Sidrane	455f762516	px4_fmu-v6x:Support RC03 HW	4 years ago
honglang	43e1cda8ac	uavcan: add tune_control/beep	4 years ago
PX4 BuildBot	f571b29ae8	Update submodule matrix to latest Sun Jan 24 12:39:24 UTC 2021 - matrix in PX4/Firmware (`92f2043d8b`): `054f8b12f4` - matrix current upstream: `977cf52322` - Changes: `054f8b12f4...977cf52322` `977cf52` 2021-01-22 Julian Kent - Ignore debug line in code coverage `4837316` 2021-01-22 Julian Kent - Fix small inconsistencies and compiler warnings `d540ca5` 2021-01-13 Julian Kent - Coerce default epsilon values to Type	4 years ago
Silvan Fuhrer	92f2043d8b	TECS: add EAS_sp to tecs_status.msg and rename other airspeeds to TAS Signed-off-by: Silvan Fuhrer <silvan@auterion.com>	4 years ago
Silvan Fuhrer	5e32e9be5a	TECS: rename variables and methods to make clear which are EAS and which TAS Signed-off-by: Silvan Fuhrer <silvan@auterion.com>	4 years ago
Silvan Fuhrer	4922659ef4	FW Position controller: specify in params that the airspeed setpoints are for calibrated airspeed Signed-off-by: Silvan Fuhrer <silvan@auterion.com>	4 years ago
jinger26	8118886f63	updated roadmap link	4 years ago
David Sidrane	1414c02471	msg:led_control Extend to support 8 LEDS	4 years ago
David Sidrane	7800f94dcb	cuav_can-gps-v1 Use SK6812 Serial PWM LED Driver	4 years ago
David Sidrane	2c4d1d8fe0	Add SK6812 Serial PWM LED DMA Driver	4 years ago
David Sidrane	64531c4521	Add SK6812 Serial PWM LED Driver	4 years ago
David Sidrane	0b85039882	Add Neopixel Driver	4 years ago
David Sidrane	fdba8f1f23	cuav_can-gps-v1:Use corrected pinout	4 years ago
David Sidrane	f7aea05b19	Nuttx with STM32F4412 corrected pinmap	4 years ago
Jaeyoung-Lim	fa5a6cf712	Add option for custom mavlink configuration This commit enables a option for users to add a custom mavlink configuration through rc.mavlink_override	4 years ago
이충경	17ea6f68e2	fix variable name in EKF2Selector (#16621 )	4 years ago
Silvan Fuhrer	da7f6d06f3	AirspeedSelector: set default of ASPD_DO_CHECKS to 1 and ASPD_FS_INTEG to 5. That enables the sensor checks by default The default for the innovation check integral of 5 is rather conservative, thus makeing it less likely to be triggered by accidnet (e.g. due to bad wind estimate). Signed-off-by: Silvan Fuhrer <silvan@auterion.com>	4 years ago
Silvan Fuhrer	28f9214e56	AirspeedSelector: parameter clean up and disable re-enabling if clear delay negative Signed-off-by: Silvan Fuhrer <silvan@auterion.com>	4 years ago
Silvan Fuhrer	98d057b8c9	AirspeedValidator: change logic for innovation checks Previously, the logic was not consistent with the description in the params. It now, if the integral is enabled, declares innovation check failed if integral is above threshold. Signed-off-by: Silvan Fuhrer <silvan@auterion.com>	4 years ago
Silvan Fuhrer	0c2099e788	AirspeedSelector: improve messaging on airspeed sensor switches Signed-off-by: Silvan Fuhrer <silvan@auterion.com>	4 years ago
Silvan Fuhrer	aecc0aa0c3	AirspeedSelector: do checks for data stopped in airspeed selector, not validator Signed-off-by: Silvan Fuhrer <silvan@auterion.com>	4 years ago
Silvan Fuhrer	7132e674d6	AirspeedValidator: Simplify data missing check The data_stopped check should be independent of the innovation and load factor check. Signed-off-by: Silvan Fuhrer <silvan@auterion.com>	4 years ago
Silvan Fuhrer	083cd6f1c1	AirspeedValidator: remove unnecessary _checks_failing Signed-off-by: Silvan Fuhrer <silvan@auterion.com>	4 years ago
Silvan Fuhrer	37a49dbb6a	AirspeedValidator: improve readability Signed-off-by: Silvan Fuhrer <silvan@auterion.com>	4 years ago
Silvan Fuhrer	061fb9ac07	AirspeedSelector: add const Signed-off-by: Silvan Fuhrer <silvan@auterion.com>	4 years ago
Silvan Fuhrer	cd2c366e22	AirspeedSelector: remove unnecessary reboot required and Experimental comments in params Signed-off-by: Silvan Fuhrer <silvan@auterion.com>	4 years ago
Silvan Fuhrer	11dbc7e17f	AirspeedSelector: improve description of ASPD_FALLBACK_GW Signed-off-by: Silvan Fuhrer <silvan@auterion.com>	4 years ago
Silvan Fuhrer	0f1207dd7e	AirspeedSelector: improve readability Signed-off-by: Silvan Fuhrer <silvan@auterion.com>	4 years ago
PX4 BuildBot	1d8808183d	Update submodule ecl to latest Thu Jan 21 17:04:02 UTC 2021 - ecl in PX4/Firmware (`18bac6aff5`): `99575d73e1` - ecl current upstream: `b919f3ddf4` - Changes: `99575d73e1...b919f3ddf4` `b919f3d` 2021-01-21 Paul Riseborough - EKF: Restore protection from extreme innovation values `efb78de` 2021-01-21 Paul Riseborough - EKF: Set position fusion gate option false by default `556a195` 2021-01-19 Paul Riseborough - EKF: Improve handling of non position mode large position innovations	4 years ago
Daniel Agar	18bac6aff5	ROMFS: posix rcS set EXTRA_MIXER_MODE	4 years ago
Daniel Agar	e0b33ba842	mavlink: temporarily disable ACTUATOR_OUTPUT_STATUS stream by default - the presence of this stream appears to be causing the MAVSDK tests to fail and needs to be investigated	4 years ago
Matthias Grob	7cdb9e9412	MulticopterPositionControl: altitude comment typo	4 years ago
Matthias Grob	4ce4fe05c5	BlockLowPass: initialize state in definition	4 years ago
ArthurLamberticus	82d32c7f3f	mavlink: add ACTUATOR_OUTPUT_STATUS stream Co-authored-by: Lise Prunier <lise.prunier@aerialcoboticus.com>	4 years ago
Matthias Grob	4becf74cbc	.gitmodules: adapt submodule names to repo renaming	4 years ago
Matthias Grob	65884960fa	Remove ancient submodules that were accidentally added back without URL in #16471	4 years ago
Hamish Willee	bd00aec936	Parameter markdown use page css for layout	4 years ago
Daniel Agar	9a066959d4	delete empty src/lib/DriverFramework	4 years ago
TheLegendaryJedi	64c857562d	Crazyflie v 21 (#16502 ) Build model name fix. Co-authored-by: TheLegendaryJedi <goncalo.atanasio@gmail.com>	4 years ago
TheLegendaryJedi	dd9b0ded0f	[UPDATE] - Remove duplicate syslink code	4 years ago
TheLegendaryJedi	641665f2e9	[UPDATE] - Workflows and Jenkins CI builds CF21	4 years ago

1 2 3 4 5 ...

34346 Commits (834ac38841a27f6f85f247eed88b1c27c94de65a) All Branches Search

34346 Commits (834ac38841a27f6f85f247eed88b1c27c94de65a)

All Branches