Previously the coordinate_frame flag for setpoint_target_global_int message was not handled, resulting in the vehicle to not handle altitude correctly. This commit handles the relative altitude correctly.
* Update launch files to support multi-video stream in SITL
* Pass extra args to jinja_gen.py inside gazebo_sitl_multiple_run.sh to enable multi-video streaming
This sets the throttle of the Multicopter actuators to the throttle stick position
while in Stabilized, Acro or Manual mode.
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
- handle saving the mag bias per sensor (across all estimator instances using that mag) in sensors/vehicle_magnetometer
- this is now saving back to the actual mag calibration CAL_MAGn_OFF{X,Y,Z}
- ekf2 reset mag mag bias on any magnetometer or calibration change
- use Kalman filter scheme to update stored mag bias parameters using all available bias estimates for that sensor
Co-authored-by: Paul Riseborough <gncsolns@gmail.com>
The case when acceleration setpoints were being passed in offboard mode was triggering control_climbrate_mode. This prevented the vehicle from taking off, since it made the vehicle skip the rampup phase of the takeoff
This commit fixes this by handling the case properly
- main motors are the ones which are meant to be used as propulsion in fw mode
- alternate motors are the ones usually meant to be switched off in fw mode
Signed-off-by: RomanBapst <bapstroman@gmail.com>
Do not use LOITER_TO_ALT for rotary wing mode as it would then always climb to
at least MIS_LTRMIN_ALT, even if current clib altitude is below
(e.g. RTL immediately after take off)
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
- especially when there are strong winds it's better to just go straight
to the landing point instead of trying to follow the planned path
Signed-off-by: RomanBapst <bapstroman@gmail.com>
- if vtol and in rotary wing mode then don't execute the mission landing
because it's designed to be flow as a fixed wing
- if vtol and in rotary wing mode and mission land is available then fly directly
to landing point and don't go home!
Signed-off-by: RomanBapst <bapstroman@gmail.com>
- this fixes a race condition which happens when an RTL is triggered
during the final approach of a mission landing. In that case the mission inactive
method is never called.
Signed-off-by: RomanBapst <bapstroman@gmail.com>
- previously the decision of being on a landing pattern was taken by just
looking at the current mission index. However, even if the current mission
index indicates a landing pattern the vehicle could be at an arbitrary location, far
from being established on the pattern.
Signed-off-by: RomanBapst <bapstroman@gmail.com>
NAV_CMD_LOITER_TO_ALT
- this allows vtol to track the loiter circle during the transition instead
of trying to fly to the landing position
Signed-off-by: RomanBapst <bapstroman@gmail.com>
This adds the option to limit the rate of change (slew rate) of an output that's mixed by a simple mixer.
To enable it, a positive number has to be added at the end (6th number) of the output scaler line of the mixer,
specifying the min rise time of this output.
E.g. O: 10000 10000 0 -10000 10000 20000 for a rise time of 2s, resp. a max slew rate of 0.5s^-1.
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
- the purpose is to ensure that every WorkItem (and WorkItems scheduled
by WorkItems) is allowed to run to completion every step
- per workqueue register a lockstep component whenever a work item is
added (if not already registered)
- once the work queue is empty unregister component
Jaeyoung-Lim
Daniel Agar
PX4 BuildBot
Mohamed Abdelkader Zahana
Silvan Fuhrer
xdwgood
Thies Lennart Alff
Matthias Grob
garfieldG
Paul Riseborough
RomanBapst