px4_autopilot

Commit Graph

Author	SHA1	Message	Date
Daniel Agar	4d288512b5	add board architecture specific init defaults	4 years ago
Daniel Agar	19de1e57e3	gyro_fft promote to modules and include on all boards	4 years ago
Beat Küng	7e33d03470	drivers: remove tap_esc - it's not used anymore - it would need a refactoring to use mixer_module	4 years ago
Daniel Agar	414f9f81d9	move fake GPS to standalone module	4 years ago
Daniel Agar	ab0d0fd0be	uORB move to PX4 platform layer	4 years ago
Daniel Agar	44df0fb7a2	Analog Devices ADIS16448 rewrite - new IMU driver structure with state machine (no sleeps in bus thread) - verify all configured registers and trigger reset on failure - detect if DIO1 or DIO2 are actually connected for data ready interrupt usage - don't use CRC-16 on burst transfers except for verified lots	4 years ago
Daniel Agar	fb2a199621	delete unmaintaned mkblctrl driver	4 years ago
Daniel Agar	a257120e8d	boards: use new param default mechanism	4 years ago
Daniel Agar	8f0918a16b	boards: remove unused linker __param section	4 years ago
Daniel Agar	a2442ffb48	board: enable UAVCAN sensors by default on F7/H7	4 years ago
Daniel Agar	3b71e8e62d	boards: cubepilot fix BAT2_V_DIV param default typo	4 years ago
Daniel Agar	1ec10bfcc6	boards: disable CONFIG_ARMV7M_LAZYFPU again (#16573 ) - this was causing hard faults on the CUAV Nora and possibly other boards, disabling everywhere until we fully understand the root cause	4 years ago
Daniel Agar	cb74cb8692	boards: enable CONFIG_ARMV7M_LAZYFPU everywhere	4 years ago
Daniel Agar	763c3b8fda	boards: start enabling multi-EKF by default on F7/H7	4 years ago
Matthias Grob	7545249215	Add flight_mode_manager to all targets with mc_pos_control	4 years ago
David Sidrane	22bc176885	Added mft for queries	4 years ago
David Sidrane	55c091e0fc	cubepilot_cubeyellow: Use px4_platform_configure	4 years ago
Daniel Agar	ce51a01822	boards: cubepilot orange and yellow start isolated sensor bus (SPI4) first - this makes the isolated sensors primary by default	4 years ago
Daniel Agar	c60743b306	boards: NuttX increase file name max 32 -> 40	4 years ago
Daniel Agar	233949a377	NuttX upgrade to 10.0.0+ defconfig changes	4 years ago
Daniel Agar	762d925d20	boards: cubepilot orange/yellow fix BOARD_DSHOT_MOTOR_ASSIGNMENT	4 years ago
Daniel Agar	2728af4264	boards: cubeorange and cubeyellow disable serial console (used for ADSB on new carrier boards) - add console builds (cubepilot_cubeorange_console) for hardware test rack and developers	4 years ago
David Sidrane	fc5caf382c	cubepilot_cubeyellow: Updates for NuttX 9.1.0+ External schedule_note	4 years ago
David Sidrane	f9adf861dc	spracing_h7extreme Updates for NuttX 9.1.0-	4 years ago
David Sidrane	e8e463b875	cubepilot_cubeyellow Updates for NuttX 9.1.0- cubepilot_cubeyellow: defconfig MMCSD enable multiblock	4 years ago
SalimTerryLi	c037dbef21	Rename and move src/drivers/adc to src/drivers/adc/board_adc	5 years ago
Beat Küng	787f9c1213	i2c: use board-specific bus numbering for '-X -b <bus>' CLI As boards don't have their external buses labeled consistently, it was not useful to use an abstraction.	5 years ago
Daniel Agar	2c3441aa90	boards: reduce CONFIG_NFILE_DESCRIPTORS 15 -> 12 - reduced now that calibration uses uORB::Subscription - can likely be reduced further (perhaps < 8) with additional testing	5 years ago
Daniel Agar	65ab7cef2e	boards: cubepilot/cubeyellow small fixes and improvements - fix UART config (GPS1, etc) - TELEM2 enable TX DMA - init simplify (sync with CubeOrange) - amber LED use for armed state - manually start ak09916 (Here2) on I2C2 with proper rotation	5 years ago
Daniel Agar	cfbf69f2a7	boards: rename Hex -> CubePilot - hex_cube-orange_default -> cubepilot_cubeorange_default - hex_cube-yellow_default -> cubepilot_cubeyellow_default	5 years ago

1 2

80 Commits (8d03e71c1651681ecaccf87fdd0e5ad0b3272ae0)