px4_autopilot

Commit Graph

Author	SHA1	Message	Date
alexklimaj	9d3e18dbe1	ARK Flow rev 2 add icm42688p	4 years ago
TSC21	a67e66000e	protocol_splitter: including magic number on XOR for checksum	4 years ago
TSC21	4741ec25ce	microRTPS: increase base message ID space to 179	4 years ago
Matthias Grob	5ac5399d83	Remove horizontal slow down close to ground Because based on the numerous complaints it was disabled by default (only velocities above 10m/s were limited) and since then no one intentionally used it anymore. But there were some minor investigations of drones not reaching their maximum speed which always showed 10m/s.	4 years ago
Matthias Grob	055c9db178	state_machine_helper: allow takeoff and hold without any link	4 years ago
Matthias Grob	15096ead5f	state_machine_helper: explicitly notify about rca and data link loss	4 years ago
Matthias Grob	bec9eef5b0	state_machine_helper: react on link losses during takeoff The same way like in loiter. This should be further unified in the code but at least we can increase safety in the case the takeoff altitude is very high and the vehicle never reaches it but looses links.	4 years ago
Matthias Grob	11556d4e9a	Commander: allow disabling RC loss failsafe for mission, hold, offboard independently	4 years ago
Matthias Grob	933d31b476	commander_params: correct parameter group from Mission to Commander	4 years ago
Matthias Grob	6ee8f7be0f	Commander: switch to static_cast<> for set_nav_state parameters	4 years ago
Jukka Laitinen	d83033f449	Take the crypto_backend library into use in bootloader for signature verification Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>	4 years ago
Jukka Laitinen	0d4f481035	Add simple SW implementations for crypto_backend and keystore_backend Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>	4 years ago
Jukka Laitinen	d068ae48d6	Add header file for arhitecture/implementation specific px4 crypto and configuration for cmake Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>	4 years ago
Jukka Laitinen	b3e9904df0	Add monocypher crypto library in src/lib/crypto/monocypher This simple crypto library is used as an example default backend for the crypto interfaces Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>	4 years ago
Jukka Laitinen	09e62f96b2	Put all the test key material into same directory Move Tools/test_key.json and key0.pub into same directory. key0.pub is just a hex-dump of the public key part from the test_key.json, for easy inclusion into bootloader monocypher sw crypto Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>	4 years ago
Jukka Laitinen	caed8e4b05	Fix cryptotools.py signature alignment If the signature start address is already aligned, the tool erroneously adds 4 filling bytes Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>	4 years ago
Roman Dvořák	ab0e3b6001	icm20948_i2c_passthrough: allow to configure i2c address	4 years ago
Beat Küng	d79229f958	mavlink_shell.py: allow scripted use E.g. echo free\|./Tools/mavlink_shell.py Or creating a virtual nsh console: socat pty,rawer,link=/tmp/fmu_nsh_pts exec:"mavlink_shell.py 0.0.0.0\\:14550,pty,rawer"	4 years ago
Sander Swart	aa60d76963	camera trigger: don't keep triggering while enabled but paused	4 years ago
achim	6b356068cb	boards: mro_x21-777 board.h fix SPI 2 SCK pin - SPI 2 had the wrong SCK PIN -> PB10 instead of PB13 -> accidentally the kill pin could be probably wrong on other mro boards	4 years ago
Mathieu Bresciani	9cedb169fc	HTE: relax validity condition when already valid (#17783 ) The condition to get valid requires a low variance and test ratio. but to stay valid, only the variance is required. Co-authored-by: Daniel Agar <daniel@agar.ca>	4 years ago
Hamish Willee	74cc1d901d	Thoneflow - fix up links to docs	4 years ago
Matthias Grob	0dee7af81f	ekf2_params: enable baro ground effect compensation by default	4 years ago
Thomas	a264541861	explicitly set param2 to 0 in existing *DO_VTOL_TRANSITION commands. add a guard against NaNs.	4 years ago
TSC21	0c5f2d3b8c	microRTPS: add missing header for PRIu32 and PRIu16 macros Co-authored-by: squizz617 <seulbae@gatech.edu>	4 years ago
TSC21	9fb53d4276	microRTPS: add option to build the microRTPS agent after its generation	4 years ago
TSC21	084a992572	microRTPS: agent: only allow to whitelist the localhost when using FastDDS as the rmw	4 years ago
TSC21	79f7986715	apply ROS2 default memory management and publish mode QoS policies; make sure that SharedMemory is only used with FastDDS as the rmw	4 years ago
Igor Mišić	39909128ec	micrortps_client: increased stack size by 250B Co-authored-by: Nuno Marques <n.marques21@hotmail.com>	4 years ago
TSC21	d3a23cee40	microRTPS: agent: fix double free memory problem on SIGINT It fixes also some minor issues when exiting the agent, including the printed stats	4 years ago
TSC21	6d5f12d2a2	microRTPS: client: add TX rate limiter	4 years ago
TSC21	ac2b38603c	microRTPS: client: add missing "-p" option for the UART poll timeout and use microsecs for the send/rcv thread sleeps	4 years ago
TSC21	0cc79f3e48	microRTPS: client: show diagnostic of current bandwidth usage on the 'status' option	4 years ago
TSC21	d6ee15596d	microRTPS: client: show diagnostic of average bandwidth usage on the 'status' option	4 years ago
TSC21	40462bfc1f	microRTPS: client: reduce name set by pthread_setname_np since Linux requires names (with NUL) to fit in 16 chars, otherwise returns ERANGE (34)	4 years ago
TSC21	145e7387fb	posix: start the microRTPS client in sim every time the module is available	4 years ago
TSC21	773d81f208	microRTPS: client: fix send per allocated topic	4 years ago
TSC21	f2fad6d966	microRTPS: by default, when FastDDS >= 2.0, enable Shared Memory transport for the agent participants when the localhost network is enabled	4 years ago
TSC21	320b414511	microRTPS: client: match the code style from the PX4 Firmware	4 years ago
TSC21	63571b3e3f	microRTPS: agent: match the code style from the PX4 Firmware	4 years ago
TSC21	323ce797f8	microRTPS: allow communications only in the localhost network when ROS_LOCALHOST_ONLY env variable is set	4 years ago
TSC21	578e426e9e	microRTPS: set trajectory_waypoint to be sent only, as this is outgoing data with vehicle_trajectory_waypoint_desired	4 years ago
Pieter-Jan Dewitte	155d3c7d36	FW pos control: fix airspeed input constaining	4 years ago
Claudio Micheli	b1829e5766	Predict and use braking distance when Pausing auto modes (for multicopters) (#17269 )	4 years ago
Daniel Agar	76a8617529	sensors: fix IMU init race condition - IMU init requires valid published data (device ids, etc) - orb_group_count will include advertised instances before data is published, so this can't be used to throttle IMU init attempts	4 years ago
Peter van der Perk	b2742658b7	UAVCANv1 port unset fixes and deinitialization	4 years ago
Beat Küng	1c3f30be01	protocol_splitter: tcflush() uart before closing it	4 years ago
Beat Küng	14ec7a0d93	mavlink: tcflush() uart before closing it On NuttX with flow control, if no one was reading from the uart, the close() call would block indefinitely waiting for data to be sent.	4 years ago
honglang	074ed24d02	nora:fixed syntax error	4 years ago
Daniel Agar	500c45e798	uORB: Subscription check if uORB::Manager instance is valid - this is necessary if uORB::Subscription is used with static storage duration	4 years ago

1 2 3 4 5 ...

35700 Commits (8f55c960b65a4b43dc6feb9d19ec8a8875d4469e) All Branches Search

35700 Commits (8f55c960b65a4b43dc6feb9d19ec8a8875d4469e)

All Branches