ff4ad00496
aerocore nsh Refreshed nuttx config for 7.19+
7 years ago
83643a719a
nuttx config: increase CONFIG_NFILE_DESCRIPTORS from 53 to 54
...
This is needed when logger is logging to file and ulog streaming gets
activated.
8 years ago
1be089cf0c
BBSRAM: add another partition and store the last ulog path
8 years ago
d10848c129
aerocore NuttX defconfig: lower CONFIG_DEV_PIPE_SIZE to 70
...
This saves almost 2kb of RAM when using the mavlink shell. 70 matches the
size of the mavlink message. Since the pipe is blocking, a process writing
a lot of data will just wait, data will not be dropped.
The mavlink shell is the only process creating a pipe.
8 years ago
1d93b1bce3
nuttx configs: increase CONFIG_NFILE_DESCRIPTORS from 51 to 53
...
this is needed due to the additional topics logged with the logger
8 years ago
57581ddaac
aerocore Increased IRQ Stack Size
8 years ago
2e235b9013
Changes to aerocore for upstream Nuttx
8 years ago
3829871612
Removed unused NXFFS buys back 5792 bytes of FLASH
9 years ago
0b54bb99f9
NuttX quiet build
...
cmake combine NuttX copy and export
-NuttX wasn't recopying if it fails to compile
9 years ago
ff360aa75a
NuttX configs: Add hotfix for RX DMA buffer sizes
10 years ago
e7a3674c1d
This is a temporary hot fix for lost data
10 years ago
6d41b5d063
NuttX configs: Reduce excessive number of reserved FDs
10 years ago
c147424fe7
nuttx-configs fix code style
10 years ago
f7ef6e1950
Fix stack sizes based on observed usage. Frees some more RAM
10 years ago
17615b22a4
Insure that CONFIG_ARCH_BOARD_xxx is defined and to be consistent with Nuttx build place them in defconfig files so that config.h will have ONFIG_ARCH_BOARD_xxx defined
10 years ago
4b27e4029d
Disabled stack checking on aerocore
10 years ago
517e1e8d48
Fixed permissions
10 years ago
4b8feb03cf
Match the OS build's CONFIG_ARMV7M_STACKCHECK setting by using actual setting in the exported nuttx config.h file to control each board build setting of ENABLE_STACK_CHECKS in toolchain_gnu-arm-eabi.mk
10 years ago
f1c5fcd8da
NuttX configs / build options: Do not warn about sign compare, as there are a bunch of non-standard signedness assumptions
10 years ago
1525341cad
Disable CONFIG_ARCH_IRQPRIO in all NuttX configs
11 years ago
e5508a1aa0
Add Gumstix AeroCore device
...
Based on the work of Andrew Smith [1], add board configuration and device
drivers to support the Gumstix AeroCore (previously Aerodroid) board [2]. The
AeroCore is an autopilot board based on a STM32F427 similar to the FMUv2.
[1] https://github.com/smithandrewc/Firmware
[2] https://store.gumstix.com/index.php/products/585/
Signed-off-by: Ash Charles <ashcharles@gmail.com>
11 years ago
David Sidrane
Beat Küng
Daniel Agar
Lorenz Meier
Anton Babushkin
Ash Charles