- sitl_gazebo in PX4/Firmware (1ee08da9c4): 651ca351fd
- sitl_gazebo current upstream: 371e7c36c3
- Changes: 651ca351fd...371e7c36c3
371e7c3 2018-04-10 korotkoves - udp port for each model instance from options file
376258d 2018-04-17 korotkoves - change file format to use common and model specific parameters
b4b7245 2018-01-17 korotkoves - function to load parameters for each model from xml file
- analysed_logdata: add filter_fault_status check to test_results
dictionary to prevent a missing entry exception
- analyse_logdata: fix one-off errors of list indices due to python
non-inclusive end indices
When SYS_USE_IO was disabled, px4io would not start and thus there was no
RC. SYS_USE_IO=0 is interesting on Quads to avoid the IO and reduce output
latency.
Tested on Pixhawk 1 and Pixhawk 4
- Catch the case where the case where the driver gets stuck because nothing is received by +SBDRB
- Add a mutex for the rx buffer
- Stop the standby loop if a mode change is already scheduled
- Move publishing the telemetry status from the IridiumSBD driver to the mavlink instance
- In the commander use the iridiumsbd_status message for heartbeat in case of a high latency link
- Move positive acknowledge to the mavlink instance
- Add a failed acknowledge in the commander if no high latency link exists
* Add return to land to mission
This method uses the planned mission for rtl. If a landing sequence
is present it will continue the mission and land. If not it will
fly back the mission and loiter/land at the home position.
Beat Küng
Lorenz Meier
Alessandro Simovic
mcsauder
Simone Guscetti
Jun-Tao
Daniel Agar
PX4 Jenkins
johannes
acfloria
Hamish Willee