px4_autopilot

Commit Graph

Author	SHA1	Message	Date
Peter van der Perk	b3e799e277	[Kconfig] Add all distance sensors	3 years ago
Peter van der Perk	21e6547ac7	[Kconfig] Toolchain & platform fixes, SITL still broken	3 years ago
Peter van der Perk	6af0477733	[Kconfig] Gnerate px4board from old cmake Added make updateconfig to update all config when default's have changed Added cmake to px4board conversion script	3 years ago
Daniel Agar	bbfaa4694c	boards: cleanup serial RX DMA hrt_call_every - remove ts_to_abstime dependency	3 years ago
Daniel Agar	c271a9e3e6	add sd_stress to all boards and run on test rack	3 years ago
Daniel Agar	6d78054f50	mavlink USB auto start/stop on boards with VBUS - no longer start sercon or mavlink usb by default - on USB connection (VBUS) monitor serial USB at low rate and start Mavlink if there's a HEARTBEAT or nshterm on 3 consecutive carriage returns - the mavlink USB instance is automatically stopped and serdis executed if USB is disconnected - skipping Mavlink USB (and sercon) saves a considerable amount of memory on older boards	3 years ago
bresch	1443f773da	mbe: add module to targets	3 years ago
bresch	5874b1f87c	mc atune: add module to all targets - adjust flash constrianed targets to fit	3 years ago
Beat Küng	c5c80e31b6	boards: remove DIRECT_INPUT_TIMER_CHANNELS from board_config.h	4 years ago
Beat Küng	a8e75d174c	boards: remove BOARD_HAS_PWM and use DIRECT_PWM_OUTPUT_CHANNELS	4 years ago
Daniel Agar	40e5477edb	NuttX boards fix mkfatfs and rcS logic	4 years ago
David Sidrane	cb150b3ced	px4_fmu-v3: Update nsh defconfig NuttX 10.1.0+	4 years ago
Beat Küng	0e1f3a2d62	px4_add_board: infer VENDOR, MODEL & LABEL from cmake file name	4 years ago
Daniel Agar	b33fdf704b	boards: px4 fmu-v2/v3 swap external SPI chip select order - fixes https://github.com/PX4/PX4-Autopilot/issues/17858	4 years ago
Daniel Agar	774ad80ba0	systemcmds/tests: split out microbenchmarks and remove obsolete tests - reorganize Jenkins HIL tests	4 years ago
David Sidrane	05bdef867d	Track NuttX syslog change	4 years ago
David Sidrane	62fd132047	boards:Use inttypes nxp_ucans32k146:Fix constant spracing_h7extreme:Use inttypes	4 years ago
echoG	6bc09138c1	Adding BatMon smart battery as a module and refactoring SMBUS based SBS 1.1 spec to a library	4 years ago
Daniel Agar	c3884b5bc1	fake_imu (formally fake_gyro) updates for testing gyro filtering - fake_imu now publishes sine sweeps over 10 seconds - accel is also published so that fake IMU can be selected when the only option	4 years ago
Daniel Agar	58b40fbbb9	boards: move testing to dedicated test variants	4 years ago
alexklimaj	0c3e64a7f5	Fix support for Cube Black Heater	4 years ago
Daniel Agar	ad934b4911	icm20948 i2c passthrough driver for ak09916 magnetometer (Here+ GPS/compass) - include icm20948 on most boards by default - create more test variants for default boards near flash limit (cuav_nora_test, cuav_x7pro_test, holybro_durandal-v1_test)	4 years ago
Daniel Agar	6874e9fba0	boards: NuttX disable all NSH memory debug commands (mb, mh, mw) by default - closes https://github.com/PX4/PX4-Autopilot/issues/17062	4 years ago
Daniel Agar	631d1647d3	boards: minimize unnecessary differences in default variants	4 years ago
Daniel Agar	4b99bd2077	boards: remove optional external ADIS IMUs to save flash	4 years ago
Daniel Agar	2257c3767e	simple gyro auto calibration module	4 years ago
Daniel Agar	f8eaa6e46b	ROMFS handle bl_update generically - include all available legacy bootloaders	4 years ago
Daniel Agar	4d288512b5	add board architecture specific init defaults	4 years ago
Daniel Agar	19de1e57e3	gyro_fft promote to modules and include on all boards	4 years ago
Daniel Agar	c9a2d0ed34	IMU_GYRO_RATEMAX set system default to 400 Hz - MC default is still 800 Hz	4 years ago
Beat Küng	7e33d03470	drivers: remove tap_esc - it's not used anymore - it would need a refactoring to use mixer_module	4 years ago
Daniel Agar	cd7713eba2	boards: delete unused variants	4 years ago
Daniel Agar	414f9f81d9	move fake GPS to standalone module	4 years ago
Daniel Agar	ab0d0fd0be	uORB move to PX4 platform layer	4 years ago
Daniel Agar	44df0fb7a2	Analog Devices ADIS16448 rewrite - new IMU driver structure with state machine (no sleeps in bus thread) - verify all configured registers and trigger reset on failure - detect if DIO1 or DIO2 are actually connected for data ready interrupt usage - don't use CRC-16 on burst transfers except for verified lots	4 years ago
Daniel Agar	fb2a199621	delete unmaintaned mkblctrl driver	4 years ago
Daniel Agar	a257120e8d	boards: use new param default mechanism	4 years ago
Daniel Agar	8f0918a16b	boards: remove unused linker __param section	4 years ago
Daniel Agar	78dff6adcb	boards: add CONSTRAINED_MEMORY build option - currently the main change is that it reduces the max number of ORB multi instances to 4, but usage will be expanded as needed - limits number of EKF2 multi instances to 2. - enabled on all cortex m4 boards	4 years ago
Daniel Agar	318c7e83b3	support up to PWM 14 - generate PWM_MAIN 1-14 - generate PWM_AUX 1-8 - generate PWM_EXTRA 1-8 - px4io and pwm_out directly read configuration parameters - only available and active physical outputs are actually shown for configuration - overall saves flash despite adding many new parameters	4 years ago
Daniel Agar	77b21680fb	sync ctrlalloc boards and add to CI	4 years ago
Julien Lecoeur	343cf5603e	initial control allocation support - control allocation module with multirotor, VTOL standard, and tiltrotor support - angular_velocity_controller - See https://github.com/PX4/PX4-Autopilot/pull/13351 for details Co-authored-by: Silvan Fuhrer <silvan@auterion.com> Co-authored-by: Roman Bapst <bapstroman@gmail.com>	4 years ago
Daniel Agar	1ec10bfcc6	boards: disable CONFIG_ARMV7M_LAZYFPU again (#16573 ) - this was causing hard faults on the CUAV Nora and possibly other boards, disabling everywhere until we fully understand the root cause	4 years ago
JacobCrabill	8e8497ff77	heater: px4io: Add support for heaters on IO MCU	4 years ago
Daniel Agar	cb74cb8692	boards: enable CONFIG_ARMV7M_LAZYFPU everywhere	4 years ago
Matthias Grob	7545249215	Add flight_mode_manager to all targets with mc_pos_control	4 years ago
David Sidrane	22bc176885	Added mft for queries	4 years ago
David Sidrane	79bedbc908	px4_fmu-v3: Use px4_platform_configure	4 years ago
Daniel Agar	c60743b306	boards: NuttX increase file name max 32 -> 40	4 years ago
Daniel Agar	233949a377	NuttX upgrade to 10.0.0+ defconfig changes	4 years ago

1 2 3 4

186 Commits (a1247d6bcfd8f605069e5f26339fdb48ec48fc86)