48da0055a1
boards: add initial mRo Pixracer Pro (M10064C) support
4 years ago
22bc176885
Added mft for queries
4 years ago
434f63d479
mro_x21: Use px4_platform_configure
4 years ago
7c07ce9649
mro_x21-777: Use px4_platform_configure
4 years ago
5703070974
mro_ctrl-zero-f7: Use px4_platform_configure
4 years ago
c60743b306
boards: NuttX increase file name max 32 -> 40
4 years ago
233949a377
NuttX upgrade to 10.0.0+ defconfig changes
4 years ago
1bf0218c87
boards: mRo Control Zero F7 fix RC input and cleanup sensors init
4 years ago
b5ebdb8e41
add system command to get and set system time
...
* add system_time command for all boards
4 years ago
00b4807443
mro_x21: Updates for NuttX 9.1.0+ External schedule_note
5 years ago
4f5c88fc89
mro_x21-777: Updates for NuttX 9.1.0+ External schedule_note
5 years ago
1e55ce0839
mro_ctrl-zero-f7: Updates for NuttX 9.1.0+ External schedule_note
5 years ago
aa1cb370e4
mro_x21 Updates for NuttX 9.1.0-
...
mro_x21: defconfig MMCSD enable multiblock
5 years ago
c9a323ebcc
mro_x21-777 Updates for NuttX 9.1.0-
...
mro_x21-777: defconfig MMCSD enable multiblock
5 years ago
2550d6f7c1
mro_ctrl-zero-f7 Updates for NuttX 9.1.0-
...
mro_ctrl-zero-f7: defconfig MMCSD enable multiblock
5 years ago
e8e463b875
cubepilot_cubeyellow Updates for NuttX 9.1.0-
...
cubepilot_cubeyellow: defconfig MMCSD enable multiblock
5 years ago
c037dbef21
Rename and move src/drivers/adc to src/drivers/adc/board_adc
5 years ago
2c3441aa90
boards: reduce CONFIG_NFILE_DESCRIPTORS 15 -> 12
...
- reduced now that calibration uses uORB::Subscription
- can likely be reduced further (perhaps < 8) with additional testing
5 years ago
fbc8e1b09e
boards: mRo X2.1-777 fixes
...
- ardupilot bootloader compatibility (first 3 sectors)
- clock tree fixes
- start mavlink
- start mpu9250 magnetometer (only onboard mag)
- fixes https://github.com/PX4/Firmware/issues/15466
5 years ago
e3d31a881e
boards: NuttX disable posix message queues
5 years ago
13e34b32e6
new Bosch BMI088 IMU driver using FIFOs and DRDY
5 years ago
6f6efd60b7
boards: centralize optional external I2C sensor start
...
- configured with new parameter SENS_EXT_I2C_PRB
5 years ago
5e7d2e830d
boards: delete old board.h boilerplate
5 years ago
5507c15bdc
boards: move rgbled_pwm startup to appropriate boards
5 years ago
d1c12ac7cf
boards: mRo Control Zero fix IMU rotations
5 years ago
951969ba00
drivers/imu/invensense: new ICM20948 driver on SPI with AK09916 mag
5 years ago
746a8f5cf9
commander: reboot/shutdown usability fixes
...
- always check with state machine before reboot/shutdown
- respect BOARD_HAS_POWER_CONTROL (shutdown from command, low battery, power button)
- px4_shutdown_request add optional delay and always execute from HPWORK
- px4_shutdown_request split out px4_reboot_request
5 years ago
28d2aca699
boards: include all procfs entries on boards that aren't flash constrained
5 years ago
8d0c92003a
boards: remove all CONFIG_NXFONTS_DISABLE*
5 years ago
06478d9997
delete obsolete SENSORIOCSPOLLRATE/SENSORIOCRESET and systemcmds/config
5 years ago
6548fde024
Whitespace cleanup to quiet new blank line at EOF git hook.
5 years ago
1ac6230758
boards: always change default IMU_GYRO_RATEMAX on px4_fmu-v2/v3 and mro_x21
...
- this can lower cpu usage considerably on older boards
5 years ago
66eacd24bc
px4_fmu-v5_stackcheck: update stack sizes and add to Jenkins
...
- increase stack sizes to run cleanly under stackcheck
- this is likely overkill for most boards, but using stackcheck to set our minimum ensures we have a very safe margin on regular builds and it's something we can currently afford
- remove holybro_durandal-v1_stackcheck from test rack (there's only one unit)
5 years ago
a89bba470a
boards: STM32F76xxx/STM32F77xxx linker add ITCM RAM and .ramfuncs handling
...
- this doesn't currently change anything, but gets us ready to start
experimenting with using the small amount of instruction tightly memory
on STM32F7
- the .ramfuncs section works with NuttX CONFIG_ARCH_RAMFUNCS
5 years ago
7aa7f0ed95
switch remaining boards to new InvenSense IMU drivers
5 years ago
ad559a66a1
examples: add simple work_item example module
5 years ago
40b1043e12
NuttX boards minor lpwork and init stack increases
5 years ago
15332a7e56
boards: reduce CONFIG_NFILE_DESCRIPTORS 20 -> 15
5 years ago
7c8ab49eb9
boards: mro_ctrl-zero-f7 fix i2c
...
- STM32_HSI_FREQUENCY 24 MHz -> 16 MHz (required for NuttX stm32f7 i2c)
5 years ago
ca81175b07
rename drivers/px4fmu -> drivers/pwm_out
...
- split out header
5 years ago
44bec269b0
boards: update all NuttX configs CONFIG_NSH_MAXARGUMENTS 12 -> 15
5 years ago
f5fe50f839
invensense/icm20608g driver minor improvements
...
- interupt pin set active low and latch
- relax retry timeout if configure failed
- improve configured empty rate (sample rate) rounding
- fix RegisterCheck
- check FIFO count as part of full transfer and reset or adjust timing if necessary
- rename DRV_IMU_DEVTYPE_ICM20608 -> DRV_IMU_DEVTYPE_ICM20608G
5 years ago
b156fe5787
boards: remove deprecated SPI + I2C defines from board_config.h
...
chip-selects are deselected in stm32_spiinitialize()
5 years ago
c4a19c8852
refactor icm20689: use driver base class
5 years ago
54da4997ad
refactor bmi088: use driver base class
5 years ago
7626be0485
refactor mpu9250: use driver base class
5 years ago
8738c26426
boards: enable NuttX SPI DMA buffers
...
- update to NuttX with stm32f4 and stm32f7 SPI DMA internal buffers
- remove explicit DMA buffer allocations from new IMU drivers
- restore original BOARD_DMA_ALLOC_POOL_SIZE
- decrease SPI DMA thresholds based on fmu-v2/v3/v4/v5 bench testing
5 years ago
8ebde51648
refactor hmc5883: use driver base class
...
Removes the calibration on startup, as these values were overwritten by
the system calibration values anyway.
So the only difference is that if all calibration scales were equal to 1,
the driver startup would have failed.
5 years ago
969a77f889
refactor mpu6000: use driver base class
5 years ago
be0a205438
refactor ist8310: use driver base class
5 years ago
Daniel Agar
David Sidrane
Tanja Baumann
SalimTerryLi
mcsauder
Beat Küng