2257c3767e
simple gyro auto calibration module
4 years ago
f8eaa6e46b
ROMFS handle bl_update generically
...
- include all available legacy bootloaders
4 years ago
4d288512b5
add board architecture specific init defaults
4 years ago
19de1e57e3
gyro_fft promote to modules and include on all boards
4 years ago
3cd9b3c2cf
Added support in Mavlink Ethernet channel parameters
...
Mavlink Ethernet channel settings such as udp port, remote port and broadcast mode now can be changed dynamically via parameters.
4 years ago
7e33d03470
drivers: remove tap_esc
...
- it's not used anymore
- it would need a refactoring to use mixer_module
4 years ago
414f9f81d9
move fake GPS to standalone module
4 years ago
ab0d0fd0be
uORB move to PX4 platform layer
4 years ago
fb2a199621
delete unmaintaned mkblctrl driver
4 years ago
a257120e8d
boards: use new param default mechanism
4 years ago
8f0918a16b
boards: remove unused linker __param section
4 years ago
1ec10bfcc6
boards: disable CONFIG_ARMV7M_LAZYFPU again ( #16573 )
...
- this was causing hard faults on the CUAV Nora and possibly other boards, disabling everywhere until we fully understand the root cause
4 years ago
cb74cb8692
boards: enable CONFIG_ARMV7M_LAZYFPU everywhere
4 years ago
763c3b8fda
boards: start enabling multi-EKF by default on F7/H7
4 years ago
7545249215
Add flight_mode_manager to all targets with mc_pos_control
4 years ago
a09d240c72
av_x-v1: Use px4_platform_configure
4 years ago
233949a377
NuttX upgrade to 10.0.0+ defconfig changes
4 years ago
b5ebdb8e41
add system command to get and set system time
...
* add system_time command for all boards
4 years ago
aa463e31b4
av_x-v1: Updates for NuttX 9.1.0+ External schedule_note
4 years ago
e487833347
av_x-v1 Updates for NuttX 9.1.0-
...
av_x-v1: defconfig MMCSD enable multiblock
4 years ago
c037dbef21
Rename and move src/drivers/adc to src/drivers/adc/board_adc
5 years ago
2c3441aa90
boards: reduce CONFIG_NFILE_DESCRIPTORS 15 -> 12
...
- reduced now that calibration uses uORB::Subscription
- can likely be reduced further (perhaps < 8) with additional testing
5 years ago
316085c154
camera_capture: remove board-specific ifdef
5 years ago
e3d31a881e
boards: NuttX disable posix message queues
5 years ago
6f6efd60b7
boards: centralize optional external I2C sensor start
...
- configured with new parameter SENS_EXT_I2C_PRB
5 years ago
5e7d2e830d
boards: delete old board.h boilerplate
5 years ago
5507c15bdc
boards: move rgbled_pwm startup to appropriate boards
5 years ago
04113b4d57
commander: changes when USB connected
...
- skip avionics rail voltage check when USB connected
- skip forced reboot on USB disconnect if circuit breaker set
- avionics voltage preflight check don't silently fail if system_power unavailble
- explicitly set supply check circuit breaker (CBRK_SUPPLY_CHK)
5 years ago
746a8f5cf9
commander: reboot/shutdown usability fixes
...
- always check with state machine before reboot/shutdown
- respect BOARD_HAS_POWER_CONTROL (shutdown from command, low battery, power button)
- px4_shutdown_request add optional delay and always execute from HPWORK
- px4_shutdown_request split out px4_reboot_request
5 years ago
06478d9997
delete obsolete SENSORIOCSPOLLRATE/SENSORIOCRESET and systemcmds/config
5 years ago
6548fde024
Whitespace cleanup to quiet new blank line at EOF git hook.
5 years ago
66eacd24bc
px4_fmu-v5_stackcheck: update stack sizes and add to Jenkins
...
- increase stack sizes to run cleanly under stackcheck
- this is likely overkill for most boards, but using stackcheck to set our minimum ensures we have a very safe margin on regular builds and it's something we can currently afford
- remove holybro_durandal-v1_stackcheck from test rack (there's only one unit)
5 years ago
a89bba470a
boards: STM32F76xxx/STM32F77xxx linker add ITCM RAM and .ramfuncs handling
...
- this doesn't currently change anything, but gets us ready to start
experimenting with using the small amount of instruction tightly memory
on STM32F7
- the .ramfuncs section works with NuttX CONFIG_ARCH_RAMFUNCS
5 years ago
ad559a66a1
examples: add simple work_item example module
5 years ago
40b1043e12
NuttX boards minor lpwork and init stack increases
5 years ago
15332a7e56
boards: reduce CONFIG_NFILE_DESCRIPTORS 20 -> 15
5 years ago
ca81175b07
rename drivers/px4fmu -> drivers/pwm_out
...
- split out header
5 years ago
44bec269b0
boards: update all NuttX configs CONFIG_NSH_MAXARGUMENTS 12 -> 15
5 years ago
b156fe5787
boards: remove deprecated SPI + I2C defines from board_config.h
...
chip-selects are deselected in stm32_spiinitialize()
5 years ago
74db018012
refactor lsm303agr: use driver base class
5 years ago
17761acd49
refactor adis16497: use driver base class
5 years ago
1f152d7d43
refactor adis16477: use driver base class
5 years ago
8738c26426
boards: enable NuttX SPI DMA buffers
...
- update to NuttX with stm32f4 and stm32f7 SPI DMA internal buffers
- remove explicit DMA buffer allocations from new IMU drivers
- restore original BOARD_DMA_ALLOC_POOL_SIZE
- decrease SPI DMA thresholds based on fmu-v2/v3/v4/v5 bench testing
5 years ago
8ebde51648
refactor hmc5883: use driver base class
...
Removes the calibration on startup, as these values were overwritten by
the system calibration values anyway.
So the only difference is that if all calibration scales were equal to 1,
the driver startup would have failed.
5 years ago
3b7b2dc871
differential_pressure sensors: use driver base class
5 years ago
d81fedfcfa
refactor lps22hb: use driver base class
5 years ago
be0a205438
refactor ist8310: use driver base class
5 years ago
0ce9e113ff
boards: stm32f4/f7 enable SPI_DMATHRESHOLD=32
5 years ago
179c89b6bd
board configs: extend board_dma_map.h with a table
5 years ago
5660ea0fd2
av_x-v1: add board_dma_map.h and enable SPI1/SPI2 DMA
5 years ago
Daniel Agar
garfieldG
Beat Küng
Matthias Grob
David Sidrane
Tanja Baumann
SalimTerryLi
mcsauder