- Allocate and free the node name in uORBDeviceNode.
- Add protected build support by de-allocating the name with kmm_free, when
running in kernel side. strdup allocates from the kernel heap in NuttX kernel
space.
- Remove the CDev::unregister_driver_and_memory(), it is no longer used
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
- create common uORB::PublicationBase
- uORB::PublicationQueued types are now type aliases
- ORB_PRIO use enum type everywhere to avoid accidental misuse
- PX4Accelerometer/PX4Gyroscope/etc driver libs explicitly advertise on construction, unadvertise on destruction. This is a workaround for any potential issues that might appear when accel/gyro cdev and uORB indexing doesn't align.
The bulk of this change was tightly coupled and needed to be deleted in one pass. Some of the smaller changes were things that broke as a result of the initial purge and subsequently fixed by further eradicating unnecessary platform differences. Finally, I deleted any dead code I came across in the related files I touched while going through everything.
- DriverFramework (src/lib/DriverFramework submodule) completely removed
- added dspal submodule in qurt platform (was brought in via DriverFramework)
- all df wrapper drivers removed
- all boards using df wrapper drivers updated to use in tree equivalents
- unused empty arch/board.h on posix and qurt removed
- unused IOCTLs removed (pub block, priv, etc)
- Integrator delete methods only used from df wrapper drivers
- commander: sensor calibration use "NuttX version" everywhere for now
- sensors: update to px4_{open, read, close} instead of DevMgr wrapper (adc open for analog differential pressure)
- battery_status: update to px4_{open, read, close} instead of DevMgr wrapper (adc open for analog differential pressure)
- cdev cleanup conflicting typedefs and names with actual OS (pollevent_t, etc)
- load_mon and top remove from linux boards (unused)
- delete unused PX4_MAIN_FUNCTION
- delete unused getreg32 macro
- delete unused SIOCDEVPRIVATE define
- named each platform tasks consistently
- posix list_devices and list_topics removed (list_files now shows all virtual files)
Possible race conditions (they all happen between the check of existence
of a topic and trying to create the node):
- single instance, with multiple advertisers during the first advertise:
both advertisers see the topic as non-existent and try to advertise it.
One of them will fail, leading to an error message.
This is the cause for telemetry_status advert failure seen in SITL in
rare cases.
- multi-instance: subscription to non-existing instance -> px4_open fails,
and the subscriber tries to create the node. If during that time a
publisher publishes that instance, the subscriber will get (instance+1)
(or fails if the max number of instances is exceeded).
This is a race that goes pretty much unnoticed.
- multi-instance: 2 publishers can get the same instance (if is_published()
is false in case both have not published data yet).
This can also go unnoticed.
Therefore the patch changes where _advertised is set: it is now set
directly during the advertisement instead of during publication.
and remove the px4_ prefix, except for px4_config.h.
command to update includes:
for k in app.h atomic.h cli.h console_buffer.h defines.h getopt.h i2c.h init.h log.h micro_hal.h module.h module_params.h param.h param_macros.h posix.h sem.h sem.hpp shmem.h shutdown.h tasks.h time.h workqueue.h; do for i in $(grep -rl 'include <px4_'$k src platforms boards); do sed -i 's/#include <px4_'$k'/#include <px4_platform_common\/'$k/ $i; done; done
for in $(grep -rl 'include <px4_config.h' src platforms boards); do sed -i 's/#include <px4_config.h/#include <px4_platform_common\/px4_config.h'/ $i; done
Transitional headers for submodules are added (px4_{defines,log,time}.h)
* Add kdevelop to gitignore
* Add test stubs
* Rename px4_add_gtest to px4_add_unit_gtest
* Add infrastructure to run functional tests
* Add example tests with parameters and uorb messages
* Fix memory issues in destructors in uORB manager and CDev
* Add a more real-world test of the collision prevention
This fixes a potential dead-lock when 'uorb status' was used via MAVLink
shell.
The dead-lock chain is: DeviceMaster::lock() -> printf -> output to a pipe,
which blocks until a reader reads the data. In that case it's mavlink.
If mavlink makes a call that requires DeviceMaster::lock() (such as
orb_exists), it dead-locks.
This patch moves all printf's out of the locked state.
Fixes these invalid format strings:
- A `%d` for a pointer (replaced it by `%p`)
- A 0x%08x (and a 0x%0x8!) for a pointer (replaced by %p)
- 2 cases of `%d` for a `ssize_t` (replaced it by `%zi`)
- 1 case of a %u for an `int` (replaced by %i)
- 3 cases of %d for a `long` (replaced by %ld)
- 19 cases of `%d`, `%i`, `%u` or `%lu` for a `size_t` (replaced it by `%zu`)
- An unused formatting argument (removed it)
- A missing `%d` (added it)
- A missing `%s` (added it)
- 2 cases of `%llu` for a `uint64_t` (replaced it by `"%" PRIu64`)
- 6 cases of giving a string directly as format string (replaced it by `("%s", string)`)
- 2 cases of %*-s, which should probably have been %-*s.
(Looks like NuttX accepts (the invalid) %*-s, but other platforms don't.)
- A %04x for a `uint32_t` (replaced by "%04" PRIx32)
Jukka Laitinen
Daniel Agar
FengShun
Beat Küng
Julian Kent
Julian Oes
Mara Bos