* NSH Added support for set [{+|-}{e|x|xe|ex}] [<name> <value>]
Set the 'exit on error control' and/or 'print a trace' of
commands when parsing scripts in NSH.
The settinngs are in effect from the point of exection,
until they are changed again, or in the case of the init
script, the settings are returned to the default settings
when it exits.
Included child scripts will run with the parents settings
and changes made in the child script will effect the parent
on return.
Use 'set -e' to enable and 'set +e' to disable (ignore) the exit
condition on commands. The default is -e. Errors cause script to
exit.
Use 'set -x' to enable and 'set +x' to disable (silence) printing
a trace of the script commands as they are ececuted. The default
is +x. No printing of a trace of script commands as they are
executed.
Print expanded variables if -x
* Added comments only on how to use the set +e and and set -x
* Spelling NSH_PFALG_* -> NSH_PFLAG_*
This fixes the issue with initializing channels 5,6 without
channels 1-4.
The code assumed all timers actions were in order to be
initialized. This is not the case. This commit fixes that
bad assumption by not stopping the configuration on the
first action entry with a base == 0, but processing all
entries with non-zero base.
Log file download via Mavlink is the one that needs the most bandwidth.
It needs typically around 200B TX buffer, and spikes at around 1500B every
10sec, with an average download speed of 230KB/s.
Log file download via Mavlink is the one that needs the most bandwidth.
It needs typically around 200B TX buffer, and spikes at around 1500B every
10sec, with an average download speed of 230KB/s.
Log file download via Mavlink is the one that needs the most bandwidth.
It needs typically around 200B TX buffer, and spikes at around 1500B every
10sec, with an average download speed of 230KB/s.
Log file download via Mavlink is the one that needs the most bandwidth.
It needs typically around 200B TX buffer, and spikes at around 1500B every
10sec, with an average download speed of 230KB/s.
Log file download via Mavlink is the one that needs the most bandwidth.
It needs typically around 200B TX buffer, and spikes at around 1500B every
10sec, with an average download speed of 230KB/s.
Log file download via Mavlink is the one that needs the most bandwidth.
It needs typically around 200B TX buffer, and spikes at around 1500B every
10sec, with an average download speed of 230KB/s.
Log file download via Mavlink is the one that needs the most bandwidth.
It needs typically around 200B TX buffer, and spikes at around 1500B every
10sec, with an average download speed of 230KB/s.
MPU9250 is mostly an MPU6500 with a mag (AK8963) in the same package.
Support driving MPU6500 with the MPU9250 driver. The id of the driver
isn't set differently since this way it allows to force a recalibration.
Ideally MPU9250 driver could even not exist and the support for these
sensors be merged back in the MPU6000 that's more complete. This is an
intermediate step in that direction.
- There's no I2C2, so remove it
- Fix alignments everywhere in board_config.h
- Clarify STM32 ADC (not available) and the ADC on the FGPA
- Fix format on some comments
David Sidrane
Daniel Agar
Hamish Willee
Beat Küng
ChristophTobler
Lucas De Marchi
bresch
Pavel Kirienko