px4_autopilot

Commit Graph

Author	SHA1	Message	Date
Peter van der Perk	6af0477733	[Kconfig] Gnerate px4board from old cmake Added make updateconfig to update all config when default's have changed Added cmake to px4board conversion script	3 years ago
Daniel Agar	bbfaa4694c	boards: cleanup serial RX DMA hrt_call_every - remove ts_to_abstime dependency	3 years ago
Daniel Agar	51758bd7e6	boards: delete unused variants	3 years ago
Daniel Agar	c271a9e3e6	add sd_stress to all boards and run on test rack	3 years ago
Daniel Agar	6d78054f50	mavlink USB auto start/stop on boards with VBUS - no longer start sercon or mavlink usb by default - on USB connection (VBUS) monitor serial USB at low rate and start Mavlink if there's a HEARTBEAT or nshterm on 3 consecutive carriage returns - the mavlink USB instance is automatically stopped and serdis executed if USB is disconnected - skipping Mavlink USB (and sercon) saves a considerable amount of memory on older boards	3 years ago
bresch	1443f773da	mbe: add module to targets	3 years ago
bresch	5874b1f87c	mc atune: add module to all targets - adjust flash constrianed targets to fit	3 years ago
Beat Küng	a8e75d174c	boards: remove BOARD_HAS_PWM and use DIRECT_PWM_OUTPUT_CHANNELS	4 years ago
Daniel Agar	40e5477edb	NuttX boards fix mkfatfs and rcS logic	4 years ago
Daniel Agar	ab1c90d831	boards: cubeorange/cubeyellow use amber LED for armed state	4 years ago
David Sidrane	bb913ae11a	system_load:Track Dynamic PID hash	4 years ago
David Sidrane	64bf02384f	cubepilot_cubeyellow: Update nsh defconfig NuttX 10.1.0+	4 years ago
David Sidrane	281a238bb0	cubepilot_cubeyellow: Update test defconfig NuttX 10.1.0+	4 years ago
Beat Küng	0e1f3a2d62	px4_add_board: infer VENDOR, MODEL & LABEL from cmake file name	4 years ago
Daniel Agar	774ad80ba0	systemcmds/tests: split out microbenchmarks and remove obsolete tests - reorganize Jenkins HIL tests	4 years ago
Daniel Agar	c5b1fe86ca	delete deprecated BAT_* parameters	4 years ago
David Sidrane	05bdef867d	Track NuttX syslog change	4 years ago
echoG	6bc09138c1	Adding BatMon smart battery as a module and refactoring SMBUS based SBS 1.1 spec to a library	4 years ago
Daniel Agar	5f775b508f	boards: enable CONFIG_OTG_ID_GPIO_DISABLE on all F7/H7	4 years ago
David Sidrane	32e92ba817	Revert:Pull downs - bad levels cause motor spins	4 years ago
Daniel Agar	c3884b5bc1	fake_imu (formally fake_gyro) updates for testing gyro filtering - fake_imu now publishes sine sweeps over 10 seconds - accel is also published so that fake IMU can be selected when the only option	4 years ago
David Sidrane	4da1ec1146	cubepilot_cubeyellow: Initalize PWM as input with Pull Downs	4 years ago
Daniel Agar	58b40fbbb9	boards: move testing to dedicated test variants	4 years ago
Daniel Agar	ad934b4911	icm20948 i2c passthrough driver for ak09916 magnetometer (Here+ GPS/compass) - include icm20948 on most boards by default - create more test variants for default boards near flash limit (cuav_nora_test, cuav_x7pro_test, holybro_durandal-v1_test)	4 years ago
Daniel Agar	6874e9fba0	boards: NuttX disable all NSH memory debug commands (mb, mh, mw) by default - closes https://github.com/PX4/PX4-Autopilot/issues/17062	4 years ago
Daniel Agar	631d1647d3	boards: minimize unnecessary differences in default variants	4 years ago
Daniel Agar	4b99bd2077	boards: remove optional external ADIS IMUs to save flash	4 years ago
Daniel Agar	2257c3767e	simple gyro auto calibration module	4 years ago
Daniel Agar	4d288512b5	add board architecture specific init defaults	4 years ago
Daniel Agar	19de1e57e3	gyro_fft promote to modules and include on all boards	4 years ago
Beat Küng	7e33d03470	drivers: remove tap_esc - it's not used anymore - it would need a refactoring to use mixer_module	4 years ago
Daniel Agar	414f9f81d9	move fake GPS to standalone module	4 years ago
Daniel Agar	ab0d0fd0be	uORB move to PX4 platform layer	4 years ago
Daniel Agar	44df0fb7a2	Analog Devices ADIS16448 rewrite - new IMU driver structure with state machine (no sleeps in bus thread) - verify all configured registers and trigger reset on failure - detect if DIO1 or DIO2 are actually connected for data ready interrupt usage - don't use CRC-16 on burst transfers except for verified lots	4 years ago
Daniel Agar	fb2a199621	delete unmaintaned mkblctrl driver	4 years ago
Daniel Agar	a257120e8d	boards: use new param default mechanism	4 years ago
Daniel Agar	8f0918a16b	boards: remove unused linker __param section	4 years ago
Daniel Agar	a2442ffb48	board: enable UAVCAN sensors by default on F7/H7	4 years ago
Daniel Agar	3b71e8e62d	boards: cubepilot fix BAT2_V_DIV param default typo	4 years ago
Daniel Agar	1ec10bfcc6	boards: disable CONFIG_ARMV7M_LAZYFPU again (#16573 ) - this was causing hard faults on the CUAV Nora and possibly other boards, disabling everywhere until we fully understand the root cause	4 years ago
Daniel Agar	cb74cb8692	boards: enable CONFIG_ARMV7M_LAZYFPU everywhere	4 years ago
Daniel Agar	763c3b8fda	boards: start enabling multi-EKF by default on F7/H7	4 years ago
Matthias Grob	7545249215	Add flight_mode_manager to all targets with mc_pos_control	4 years ago
David Sidrane	22bc176885	Added mft for queries	4 years ago
David Sidrane	55c091e0fc	cubepilot_cubeyellow: Use px4_platform_configure	4 years ago
Daniel Agar	ce51a01822	boards: cubepilot orange and yellow start isolated sensor bus (SPI4) first - this makes the isolated sensors primary by default	4 years ago
Daniel Agar	c60743b306	boards: NuttX increase file name max 32 -> 40	4 years ago
Daniel Agar	233949a377	NuttX upgrade to 10.0.0+ defconfig changes	4 years ago
Daniel Agar	762d925d20	boards: cubepilot orange/yellow fix BOARD_DSHOT_MOTOR_ASSIGNMENT	5 years ago
Daniel Agar	2728af4264	boards: cubeorange and cubeyellow disable serial console (used for ADSB on new carrier boards) - add console builds (cubepilot_cubeorange_console) for hardware test rack and developers	5 years ago

1 2

58 Commits (d1e7642b9ad91f3fb511ad2b063c17375a248d6c)