4c03def6e9
boards: add CONTROL_ALLOCATOR + ACTUATOR_TEST
3 years ago
f5d9b01f5c
NuttX build in place
...
- cmake NuttX build wrapper compile in place instead of copying source tree to build directory
- slightly faster skipping necessary copying (depending on system)
- allows debugging in place
- easier to work directly in NuttX following official documentation
- simplifies overall build which should make it easier to resolve any remaining NuttX dependency issues in the build system
- the downside is switching back and forth between different builds always require rebuilding NuttX, but I think this is worth the improved developer experience
- also no longer builds px4io and bootloader in every single build, for most users these rarely change and we're wasting a lot of build time
3 years ago
2d816e0b3e
[WIP] manual_control selector hacks
3 years ago
a8c3bcca32
boards: disable CONFIG_STM32H7_SPI_DMATHRESHOLD
3 years ago
d951c74a7d
spracing/h7extreme: use single-line comments instead of multi-lines
...
Required for output_groups_from_timer_config.py parser
3 years ago
ed5fee1a72
Backport #18311 mc atune
3 years ago
454c907b7d
Kconfig backport #18327 mag_bias
3 years ago
36191e649a
Kconfig backport #18289 and other flash size fixes
3 years ago
33fd65e5fe
[Kconfig] Fix regressions found by bloaty and cleanup unused cmake
3 years ago
b3e799e277
[Kconfig] Add all distance sensors
3 years ago
21e6547ac7
[Kconfig] Toolchain & platform fixes, SITL still broken
3 years ago
6af0477733
[Kconfig] Gnerate px4board from old cmake
...
Added make updateconfig to update all config when default's have changed
Added cmake to px4board conversion script
3 years ago
bbfaa4694c
boards: cleanup serial RX DMA hrt_call_every
...
- remove ts_to_abstime dependency
3 years ago
c271a9e3e6
add sd_stress to all boards and run on test rack
3 years ago
6d78054f50
mavlink USB auto start/stop on boards with VBUS
...
- no longer start sercon or mavlink usb by default
- on USB connection (VBUS) monitor serial USB at low rate and start Mavlink if there's a HEARTBEAT or nshterm on 3 consecutive carriage returns
- the mavlink USB instance is automatically stopped and serdis executed if USB is disconnected
- skipping Mavlink USB (and sercon) saves a considerable amount of memory on older boards
3 years ago
1443f773da
mbe: add module to targets
3 years ago
5874b1f87c
mc atune: add module to all targets
...
- adjust flash constrianed targets to fit
3 years ago
c5c80e31b6
boards: remove DIRECT_INPUT_TIMER_CHANNELS from board_config.h
4 years ago
a8e75d174c
boards: remove BOARD_HAS_PWM and use DIRECT_PWM_OUTPUT_CHANNELS
4 years ago
40e5477edb
NuttX boards fix mkfatfs and rcS logic
4 years ago
bb913ae11a
system_load:Track Dynamic PID hash
4 years ago
bea495999f
spracing_h7extreme:Update defconfig NuttX 10.1.0+
4 years ago
0e1f3a2d62
px4_add_board: infer VENDOR, MODEL & LABEL from cmake file name
4 years ago
a728431e43
spracing_h7extreme:Track NuttX assert changes
4 years ago
05bdef867d
Track NuttX syslog change
4 years ago
62fd132047
boards:Use inttypes
...
nxp_ucans32k146:Fix constant
spracing_h7extreme:Use inttypes
4 years ago
6bc09138c1
Adding BatMon smart battery as a module and refactoring SMBUS based SBS 1.1 spec to a library
4 years ago
5f775b508f
boards: enable CONFIG_OTG_ID_GPIO_DISABLE on all F7/H7
4 years ago
32e92ba817
Revert:Pull downs - bad levels cause motor spins
4 years ago
c3884b5bc1
fake_imu (formally fake_gyro) updates for testing gyro filtering
...
- fake_imu now publishes sine sweeps over 10 seconds
- accel is also published so that fake IMU can be selected when the only option
4 years ago
923af2c65b
spracing_h7extreme: Initalize PWM as input with Pull Downs
4 years ago
58b40fbbb9
boards: move testing to dedicated test variants
4 years ago
6874e9fba0
boards: NuttX disable all NSH memory debug commands (mb, mh, mw) by default
...
- closes https://github.com/PX4/PX4-Autopilot/issues/17062
4 years ago
3d667b1675
delete unused drivers/lights/blinkm
4 years ago
e77bffe582
boards: STM32H7 remove CONFIG_MM_REGIONS=3
4 years ago
0d4f48a8d2
spracing h7extreme:Enable ADC3 in support of temperature sensing
4 years ago
2360c50713
boards: spracing/h7extreme remove temperature_compensation and differential_pressure sensors to save flash
4 years ago
4d288512b5
add board architecture specific init defaults
4 years ago
7e33d03470
drivers: remove tap_esc
...
- it's not used anymore
- it would need a refactoring to use mixer_module
4 years ago
11ad41f7cb
delete old imu/mpu6000 driver
4 years ago
ab0d0fd0be
uORB move to PX4 platform layer
4 years ago
44df0fb7a2
Analog Devices ADIS16448 rewrite
...
- new IMU driver structure with state machine (no sleeps in bus thread)
- verify all configured registers and trigger reset on failure
- detect if DIO1 or DIO2 are actually connected for data ready interrupt usage
- don't use CRC-16 on burst transfers except for verified lots
4 years ago
fb2a199621
delete unmaintaned mkblctrl driver
4 years ago
a257120e8d
boards: use new param default mechanism
4 years ago
8f0918a16b
boards: remove unused linker __param section
4 years ago
7545249215
Add flight_mode_manager to all targets with mc_pos_control
4 years ago
22bc176885
Added mft for queries
4 years ago
94825ddc6e
spracing_h7extreme: Use px4_platform_configure
4 years ago
233949a377
NuttX upgrade to 10.0.0+ defconfig changes
4 years ago
ea3d202370
spracing_h7extrem: Updated gyros to use icm20602 drivers.
4 years ago
Beat Küng
Daniel Agar
Peter van der Perk
bresch
David Sidrane
echoG
Matthias Grob
Igor Mišić