px4_autopilot

Commit Graph

Author	SHA1	Message	Date
Daniel Agar	4627f5514e	boards: holybro_kakutef7_default disable load_mon to save flash	3 years ago
Daniel Agar	68026eadeb	save significant IMU bias changes learned by the EKF * ekf2: make publishing of learned accel biases more robust * ekf2: reset accel bias if calibration updated * msg: add separate accel and gyro calibration counters * ekf2: use separate accel and gyro calibration counters * ekf2: rework logic to reset biases when calibration counters increment * sensors: add saving of learned accel biases * ekf2: generalized saving accel/gyro/mag in flight sensor calibration * boards: holybro kakutef7 disable systemcmds/perf and systemcmds/top to save flash Co-authored-by: Paul Riseborough <gncsolns@gmail.com>	3 years ago
Beat Küng	8476875b4d	Kconfig: add missing serial ports	3 years ago
Peter van der Perk	05d71c8118	Kconfig fix CI issues after rebase	3 years ago
Peter van der Perk	ed5fee1a72	Backport #18311 mc atune	3 years ago
Peter van der Perk	454c907b7d	Kconfig backport #18327 mag_bias	3 years ago
Peter van der Perk	36191e649a	Kconfig backport #18289 and other flash size fixes	3 years ago
Peter van der Perk	33fd65e5fe	[Kconfig] Fix regressions found by bloaty and cleanup unused cmake	3 years ago
Peter van der Perk	21e6547ac7	[Kconfig] Toolchain & platform fixes, SITL still broken	3 years ago
Peter van der Perk	6af0477733	[Kconfig] Gnerate px4board from old cmake Added make updateconfig to update all config when default's have changed Added cmake to px4board conversion script	3 years ago
Daniel Agar	bbfaa4694c	boards: cleanup serial RX DMA hrt_call_every - remove ts_to_abstime dependency	3 years ago
Daniel Agar	2b9ebb7ed6	boards: holybro_kakutef7 disable systemcmds/work_queue to save flash	3 years ago
Daniel Agar	6d78054f50	mavlink USB auto start/stop on boards with VBUS - no longer start sercon or mavlink usb by default - on USB connection (VBUS) monitor serial USB at low rate and start Mavlink if there's a HEARTBEAT or nshterm on 3 consecutive carriage returns - the mavlink USB instance is automatically stopped and serdis executed if USB is disconnected - skipping Mavlink USB (and sercon) saves a considerable amount of memory on older boards	3 years ago
bresch	1443f773da	mbe: add module to targets	3 years ago
bresch	5874b1f87c	mc atune: add module to all targets - adjust flash constrianed targets to fit	3 years ago
Beat Küng	c5c80e31b6	boards: remove DIRECT_INPUT_TIMER_CHANNELS from board_config.h	4 years ago
Beat Küng	a8e75d174c	boards: remove BOARD_HAS_PWM and use DIRECT_PWM_OUTPUT_CHANNELS	4 years ago
Daniel Agar	40e5477edb	NuttX boards fix mkfatfs and rcS logic	4 years ago
David Sidrane	bb913ae11a	system_load:Track Dynamic PID hash	4 years ago
David Sidrane	a73b688566	holybro_kakutef7: Update nsh defconfig NuttX 10.1.0+	4 years ago
Beat Küng	0e1f3a2d62	px4_add_board: infer VENDOR, MODEL & LABEL from cmake file name	4 years ago
David Sidrane	05bdef867d	Track NuttX syslog change	4 years ago
Daniel Agar	5f775b508f	boards: enable CONFIG_OTG_ID_GPIO_DISABLE on all F7/H7	4 years ago
David Sidrane	32e92ba817	Revert:Pull downs - bad levels cause motor spins	4 years ago
David Sidrane	b3b74eaaf6	holybro_kakutef7: Initalize PWM as input with Pull Downs	4 years ago
Beat Küng	2219e096d7	cmake: embed param metadata if not CONSTRAINED_FLASH and not "test" LABEL	4 years ago
Daniel Agar	6874e9fba0	boards: NuttX disable all NSH memory debug commands (mb, mh, mw) by default - closes https://github.com/PX4/PX4-Autopilot/issues/17062	4 years ago
Daniel Agar	00016e53fa	boards: holybro/kakutef7 disable CONSTRAINED_FLASH to increase optimization	4 years ago
Daniel Agar	2257c3767e	simple gyro auto calibration module	4 years ago
Daniel Agar	f8eaa6e46b	ROMFS handle bl_update generically - include all available legacy bootloaders	4 years ago
Daniel Agar	4d288512b5	add board architecture specific init defaults	4 years ago
Daniel Agar	19de1e57e3	gyro_fft promote to modules and include on all boards	4 years ago
Daniel Agar	ab0d0fd0be	uORB move to PX4 platform layer	4 years ago
Daniel Agar	a257120e8d	boards: use new param default mechanism	4 years ago
Daniel Agar	8f0918a16b	boards: remove unused linker __param section	4 years ago
Daniel Agar	1ec10bfcc6	boards: disable CONFIG_ARMV7M_LAZYFPU again (#16573 ) - this was causing hard faults on the CUAV Nora and possibly other boards, disabling everywhere until we fully understand the root cause	4 years ago
Daniel Agar	cb74cb8692	boards: enable CONFIG_ARMV7M_LAZYFPU everywhere	4 years ago
Matthias Grob	7545249215	Add flight_mode_manager to all targets with mc_pos_control	4 years ago
David Sidrane	2b69fad3ac	holybro_kakutef7: Use px4_platform_configure	4 years ago
Daniel Agar	c60743b306	boards: NuttX increase file name max 32 -> 40	4 years ago
Daniel Agar	233949a377	NuttX upgrade to 10.0.0+ defconfig changes	4 years ago
Beat Küng	91fa2002e3	kakutef7: fix output ordering Regression from `d2254c2e44`, I overlooked that they were defined in reverse order.	5 years ago
David Sidrane	f77bf7f475	holybro_kakutef7: Updates for NuttX 9.1.0+ External schedule_note	5 years ago
David Sidrane	abe9f1a768	holybro_kakutef7 Updates for NuttX 9.1.0- holybro_kakutef7: defconfig MMCSD enable multiblock	5 years ago
SalimTerryLi	c037dbef21	Rename and move src/drivers/adc to src/drivers/adc/board_adc	5 years ago
Daniel Agar	2c3441aa90	boards: reduce CONFIG_NFILE_DESCRIPTORS 15 -> 12 - reduced now that calibration uses uORB::Subscription - can likely be reduced further (perhaps < 8) with additional testing	5 years ago
Daniel Agar	e3d31a881e	boards: NuttX disable posix message queues	5 years ago
Daniel Agar	6f6efd60b7	boards: centralize optional external I2C sensor start - configured with new parameter SENS_EXT_I2C_PRB	5 years ago
Beat Küng	590b65ebfb	Revert "kakutef7 spi: disable IMU drdy" This reverts commit `2069576a6e`. PR #15004 fixed the problem.	5 years ago
Daniel Agar	5e7d2e830d	boards: delete old board.h boilerplate	5 years ago

1 2 3

109 Commits (e18cf3da3e0c8ac7079cc3c3d9cfa5c7e5a09283)