px4_autopilot

Commit Graph

Author	SHA1	Message	Date
Daniel Agar	c3884b5bc1	fake_imu (formally fake_gyro) updates for testing gyro filtering - fake_imu now publishes sine sweeps over 10 seconds - accel is also published so that fake IMU can be selected when the only option	4 years ago
David Sidrane	3779ff3690	holybro_pix32v5: Disable OTG_ID_GPIO	4 years ago
David Sidrane	9c761d9ae5	holybro_pix32v5: Initalize PWM as input with Pull Downs	4 years ago
Daniel Agar	58b40fbbb9	boards: move testing to dedicated test variants	4 years ago
Daniel Agar	ad934b4911	icm20948 i2c passthrough driver for ak09916 magnetometer (Here+ GPS/compass) - include icm20948 on most boards by default - create more test variants for default boards near flash limit (cuav_nora_test, cuav_x7pro_test, holybro_durandal-v1_test)	4 years ago
Daniel Agar	6874e9fba0	boards: NuttX disable all NSH memory debug commands (mb, mh, mw) by default - closes https://github.com/PX4/PX4-Autopilot/issues/17062	4 years ago
Daniel Agar	631d1647d3	boards: minimize unnecessary differences in default variants	4 years ago
Daniel Agar	4b99bd2077	boards: remove optional external ADIS IMUs to save flash	4 years ago
Daniel Agar	2257c3767e	simple gyro auto calibration module	4 years ago
Daniel Agar	f8eaa6e46b	ROMFS handle bl_update generically - include all available legacy bootloaders	4 years ago
Daniel Agar	4d288512b5	add board architecture specific init defaults	4 years ago
Daniel Agar	19de1e57e3	gyro_fft promote to modules and include on all boards	4 years ago
Beat Küng	7e33d03470	drivers: remove tap_esc - it's not used anymore - it would need a refactoring to use mixer_module	4 years ago
Daniel Agar	11ad41f7cb	delete old imu/mpu6000 driver	4 years ago
Daniel Agar	414f9f81d9	move fake GPS to standalone module	4 years ago
Daniel Agar	ab0d0fd0be	uORB move to PX4 platform layer	4 years ago
Daniel Agar	44df0fb7a2	Analog Devices ADIS16448 rewrite - new IMU driver structure with state machine (no sleeps in bus thread) - verify all configured registers and trigger reset on failure - detect if DIO1 or DIO2 are actually connected for data ready interrupt usage - don't use CRC-16 on burst transfers except for verified lots	4 years ago
Daniel Agar	fb2a199621	delete unmaintaned mkblctrl driver	4 years ago
Daniel Agar	a257120e8d	boards: use new param default mechanism	4 years ago
Daniel Agar	8f0918a16b	boards: remove unused linker __param section	4 years ago
Daniel Agar	a2442ffb48	board: enable UAVCAN sensors by default on F7/H7	4 years ago
Daniel Agar	1ec10bfcc6	boards: disable CONFIG_ARMV7M_LAZYFPU again (#16573 ) - this was causing hard faults on the CUAV Nora and possibly other boards, disabling everywhere until we fully understand the root cause	4 years ago
Daniel Agar	cb74cb8692	boards: enable CONFIG_ARMV7M_LAZYFPU everywhere	4 years ago
Daniel Agar	763c3b8fda	boards: start enabling multi-EKF by default on F7/H7	4 years ago
Matthias Grob	7545249215	Add flight_mode_manager to all targets with mc_pos_control	4 years ago
David Sidrane	22bc176885	Added mft for queries	4 years ago
David Sidrane	a2a8d2fcf2	holybro_pix32v5: Use px4_platform_configure	4 years ago
Daniel Agar	c60743b306	boards: NuttX increase file name max 32 -> 40	4 years ago
Daniel Agar	233949a377	NuttX upgrade to 10.0.0+ defconfig changes	4 years ago
Beat Küng	274ccaf57c	system: include shutdown lock to BOARD_INDICATE_ARMED_STATE BOARD_INDICATE_ARMED_STATE was only set during arming, so an external component might have reset the board during param save, leading to param loss. This extends the API to trigger the arming state also while the shutdown lock is taken.	4 years ago
Tanja Baumann	b5ebdb8e41	add system command to get and set system time * add system_time command for all boards	4 years ago
David Sidrane	15c8a26a21	holybro_pix32v5: Updates for NuttX 9.1.0+ External schedule_note	5 years ago
David Sidrane	f9adf861dc	spracing_h7extreme Updates for NuttX 9.1.0-	5 years ago
David Sidrane	c2419e7f3d	holybro_pix32v5: Updates for NuttX 9.1.0-	5 years ago
SalimTerryLi	c037dbef21	Rename and move src/drivers/adc to src/drivers/adc/board_adc	5 years ago
Beat Küng	787f9c1213	i2c: use board-specific bus numbering for '-X -b <bus>' CLI As boards don't have their external buses labeled consistently, it was not useful to use an abstraction.	5 years ago
Daniel Agar	7569722821	iSentek IST8310 magnetometer rewrite - simple state machine to reset, configure, etc - checked register mechanism (sensor will reset itself on configuration error) - configured in 16 bit mode (1320 LSB/Gauss instead of 330 LSB/Gauss) - adjusted orientation handling in driver to match datasheet as closely as possible - in many external compass units the rotation was wrong and very difficult to actual determine how to set correctly	5 years ago
Daniel Agar	2c3441aa90	boards: reduce CONFIG_NFILE_DESCRIPTORS 15 -> 12 - reduced now that calibration uses uORB::Subscription - can likely be reduced further (perhaps < 8) with additional testing	5 years ago
Daniel Agar	e16c8fa345	boards: add new Holybro Pix32v5	5 years ago

39 Commits (e498023d0f10a1d634bfb6632246713cb697caf2)