px4_autopilot

Commit Graph

Author	SHA1	Message	Date
Daniel Agar	40e5477edb	NuttX boards fix mkfatfs and rcS logic	4 years ago
David Sidrane	bb913ae11a	system_load:Track Dynamic PID hash	4 years ago
David Sidrane	5beda51fa4	modalai_fc-v1: Update nsh defconfig NuttX 10.1.0+	4 years ago
David Sidrane	1f61dcfb06	modalai_fc-v1: Disable OTG_ID_GPIO	4 years ago
Daniel Agar	6874e9fba0	boards: NuttX disable all NSH memory debug commands (mb, mh, mw) by default - closes https://github.com/PX4/PX4-Autopilot/issues/17062	4 years ago
Daniel Agar	8f0918a16b	boards: remove unused linker __param section	4 years ago
Daniel Agar	1ec10bfcc6	boards: disable CONFIG_ARMV7M_LAZYFPU again (#16573 ) - this was causing hard faults on the CUAV Nora and possibly other boards, disabling everywhere until we fully understand the root cause	4 years ago
Daniel Agar	cb74cb8692	boards: enable CONFIG_ARMV7M_LAZYFPU everywhere	4 years ago
Daniel Agar	c60743b306	boards: NuttX increase file name max 32 -> 40	4 years ago
Daniel Agar	233949a377	NuttX upgrade to 10.0.0+ defconfig changes	4 years ago
David Sidrane	05a415cf4a	modalai_fc-v1: Updates for NuttX 9.1.0+ External schedule_note	5 years ago
David Sidrane	c8ef85c090	modalai_fc-v1 Updates for NuttX 9.1.0- modalai_fc-v1: defconfig MMCSD enable multiblock	5 years ago
David Sidrane	e8e463b875	cubepilot_cubeyellow Updates for NuttX 9.1.0- cubepilot_cubeyellow: defconfig MMCSD enable multiblock	5 years ago
Daniel Agar	2c3441aa90	boards: reduce CONFIG_NFILE_DESCRIPTORS 15 -> 12 - reduced now that calibration uses uORB::Subscription - can likely be reduced further (perhaps < 8) with additional testing	5 years ago
Daniel Agar	e3d31a881e	boards: NuttX disable posix message queues	5 years ago
Daniel Agar	5e7d2e830d	boards: delete old board.h boilerplate	5 years ago
Daniel Agar	28d2aca699	boards: include all procfs entries on boards that aren't flash constrained	5 years ago
Daniel Agar	8d0c92003a	boards: remove all CONFIG_NXFONTS_DISABLE*	5 years ago
Daniel Agar	66eacd24bc	px4_fmu-v5_stackcheck: update stack sizes and add to Jenkins - increase stack sizes to run cleanly under stackcheck - this is likely overkill for most boards, but using stackcheck to set our minimum ensures we have a very safe margin on regular builds and it's something we can currently afford - remove holybro_durandal-v1_stackcheck from test rack (there's only one unit)	5 years ago
Daniel Agar	a89bba470a	boards: STM32F76xxx/STM32F77xxx linker add ITCM RAM and .ramfuncs handling - this doesn't currently change anything, but gets us ready to start experimenting with using the small amount of instruction tightly memory on STM32F7 - the .ramfuncs section works with NuttX CONFIG_ARCH_RAMFUNCS	5 years ago
Daniel Agar	40b1043e12	NuttX boards minor lpwork and init stack increases	5 years ago
Daniel Agar	15332a7e56	boards: reduce CONFIG_NFILE_DESCRIPTORS 20 -> 15	5 years ago
Daniel Agar	44bec269b0	boards: update all NuttX configs CONFIG_NSH_MAXARGUMENTS 12 -> 15	5 years ago
Daniel Agar	8738c26426	boards: enable NuttX SPI DMA buffers - update to NuttX with stm32f4 and stm32f7 SPI DMA internal buffers - remove explicit DMA buffer allocations from new IMU drivers - restore original BOARD_DMA_ALLOC_POOL_SIZE - decrease SPI DMA thresholds based on fmu-v2/v3/v4/v5 bench testing	5 years ago
Daniel Agar	0ce9e113ff	boards: stm32f4/f7 enable SPI_DMATHRESHOLD=32	5 years ago
Beat Küng	179c89b6bd	board configs: extend board_dma_map.h with a table	5 years ago
Daniel Agar	e24fcee214	modalai_fc-v1: add board_dma_map.h and enable SPI1/SPI2 DMA	5 years ago
Daniel Agar	46a09b711f	boards: increase STDIO buffer size where we can afford it	5 years ago
Daniel Agar	505afc6063	boards: increase LPWORKSTACKSIZE 1536 -> 1600	5 years ago
David Sidrane	8d7bfa805b	modalai_fc-v1:Support Nuttx SDIO Fixes	5 years ago
Daniel Agar	bb09ac0c6d	modalai_fc-v1 sync NFILE_DESCRIPTORS, HPWORKSTACKSIZE, and LPWORKSTACKSIZE with v5x	5 years ago
Daniel Agar	8c38176d77	boards: alphabetize and sync common drivers and modules	5 years ago
Daniel Agar	99aae8b891	NuttX use toolchain math.h and avoid empty drivers/Kconfig	5 years ago
David Sidrane	4d021fcd42	modalai:fc-v1 BSP Updated to NuttX 8.1+	5 years ago
Daniel Agar	e2cf501f9d	boards: increase CONFIG_MAX_TASKS 32->64 on all F7s (#13285 ) On more complicated setups it's still possible to exceed 32 tasks. For example fmu-v5 with mavlink on every telem (+ USB), external spi usage (pmw3901), gimbal (vmount), multiple i2c sensors, and camera feedback is 35 tasks (with top running). This is a fairly extreme case, so I'm only going to increase CONFIG_MAX_TASKS on newer F7 boards.	5 years ago
modaltb	3bbf1cc868	Add support for ModalAI FC1	5 years ago

36 Commits (eda9dce0338d2f57519a9571ad69c99399593b16)